tender for special repair to raman & bhava hostel at hollyoak under igmc sub division shimla- 1 dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) for thickness of tiles upto 25mm including carriage of materials in all leads and lifts 2 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead 1:3:6 or richer mix as per direction of engineer - in charge 3 dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all lead (frame work such as joists, beams to be measured and paid for separately) including carriage of materials in all leads and lifts 4 dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within all leads & lifts:-not exceeding 3 sq.m in area 5 dismantling wooden boardings in lining of walls and partitions including frame work and stacking the materials with in all leads including carriage of materials in all leads and lifts:- thickness above 10mm and upto 25 mm 6 stone soling with kharanja stone including filling the voids with stone spalls and ramming etc. complete as per the direction of engineer-in-charge complete including ramming, watering and consolidating upto all leads and lifts 7 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. this layer will be allowed to air cure for 4 hours. (b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry complete including carriage of materials in all leads and lifts 8 providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) 2nd class deodar wood 9 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts 10 providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials in all leads and lifts as per direction of engineer-in-charge 11 reinforced cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : columns, pillars, posts and struts square, rectangular or polygonal in plan 12 centering and shuttering including strutting, propping etc. and removal of form for all heights : vertical memebers complete including carriage of materials in all leads and lifts 13 providing tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position and cost of binding wire complete up to all floor levels/all heights.as per hp.pwd specification 1990 (one thousand nine hundred ninety) volume-i, including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges 14 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) and curing complete including carriage of materials in all leads and lifts 15 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) and curing complete including carriage of materials in all leads and lifts 16 providing and laying granite stone in flooring 20mm(average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick 17 making nosing/moulding in granite stone including polishing etc. complete including carriage of materials within all leads and lifts 18 providing polishing and grinding on existing chips/marble flooring complete rubbing and polishing complete including carriage of materials in all leads and lifts 19 providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. (note:- butt hinges and necessary screws shall be paid separately)(i) second class deodar wood (a) 40 mm thick shutters 20 providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. complete including carriage of materials in all leads and lifts.rae wood/chill wood. 21 providing and fixing 6mm thick commercial thick commercial ply for cup boards with butt joints & fixing with nails & screws etc. complete 22 providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete including carriage of materials in all leads and lifts 23 providing and fixing 19mm thick commercial board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete including carriage of materials in all leads and lifts 24 providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (i) triple strip vertical type 25 providing and fixing 12mm thick shuttering ply/ water proof ply of standard quality isi mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete 26 providing and fixing 1st class pinewood panelling with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of engineer-in- charge 27 providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete 250x16mm size including carriage of materials within all leads and lifts 28 providing and fixing aluminium tower bolts, isi marked anodised (anodic coating not less thangrade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10mm 29 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (i) 125mm 30 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (i) 100mm 31 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.600mmx600mm 32 providing and fixing 1st quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 33 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level includong arises, internal round angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth (cement mortar 1:6) complete including carriage of materials in all leads and lifts 34 removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of material with in all leads and lifts 35 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 36 wall painting with acrylic emulsion paint, one or more coats on old work of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour 37 applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 38 painting wood work with deluxe multi surface paint of required shade. one or more coats applied on old work of approved brand and manufacture complte including carriage of materials in all leads and lifts 39 painting wood work with deluxe multi surface paint of required shade. two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complte including carriage of materials in all leads and lifts 40 melamine polishing two or more coats applied on new work complete including carriage of materials in all leads and lifts 41 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cutting and making good the walls etc. 15mm dia nominal bore 42 providing and fixing g.i elbow 15mm medium dia with fittings complete including carriage of materials within all leads and lifts 43 providing and fixing high pressure pvc (finolex) type-b spigot and socket, waste and ventilating pipes isi marked with collar and clamps including fixing with approved adhesive etc. complete. including carriage of materials within all leads and lifts :-110mm nominal size 44 providing & fixing pvc (finolex )110 mm dia plain bends isi marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts 45 providing and fixing 110 mm dia pvc door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts isi marked complete including fixing with approved adhesive etc.complete including carriage of materials within all leads an lifts 46 providing and fixing 110 mm dia pvc collars isi marked including fixing with approved adhesive etc.complete including carriage of materials within all leads an lifts 47 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required w.c. pan with isi marked white solid plastic seat and lid 48 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer - in - charge 49 providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white automatic flashing cistern. @ single half urinal with 5litre pvc automatic flushing cistern.including carriage of materials within all leads and lifts 50 providing and fixing division plate for urinals 600mm x 300 vitreous china including carriage of materials within all leads and lifts 51 providing & fixing wall mixing with telephonic shower arrangement only with crutch ess ess trend t-120 including carriage of materials within all leads and lifts 52 providing & fixing telephonic shower ess ess c-232 d 1 flow with 1.50mtr flexible tube & wall hook complete including carriage of materials within all leads and lifts 53 providing and fixing 3in 1 corner acrylic plastic shelf with c.p. brass bracket and guard rail complete, fixed to wooden plugs with c.p. brass screws including carriage of materials within all leads and lifts 54 providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requirewhite vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps 55 providing and fixing stainless steel kitchen sink of approved standard isi make with drain board and c.p. waste with c.i. or m.s. brackets painted white including cutting holes and making good the same but excluding fitting. 610 x 510 mm with bowl depth 200 mm 56 providing & fixing stainless steel structure for kitchen complete including carriage of materials in all leads and lifts 57 providing and fixing one hole basin mixing faucet ess trend t-118 including carriage of materials within all leads and lifts 58 providing and fixing 15mm dia cp brass kitchen sink mixer of approved quality with fittifngs etc. complete including carriage of materials in all leads and lifts 59 providing and fixing 15mm dia c.p.brass pillar cock of approved quality including carriage of materials within all leads and lifts 60 providing and fixing 15mm dia c.p.brass long body bib cock of approved quality including carriage of materials within all leads and lifts. 61 providing and fixing 15mm dia c.p.brass bib cock of approved quality including carriage of materials within all leads and lifts 62 providing and fixing 15mm dia cp brass angle cock of approved quality complete including carriage of matrials in all leads and lifts 63 providing and fixing pvc connection pipe with brass union including carriage of materials within all leads and lifts :-300/450mm length :-15mm nominal bore 64 providing and fixing p.v.c. waste pipe inclding carriage of materials within all leads and lifts.:- 32 mm dia 65 providing and fixing c.p. gratings 100 mm dia inclding carriage of materials within all leads and lifts 66 providing and fixing wall mixing faucet for shower and bath hand shower with angular and rest holder complete including carriage of materials in all leads and lifts 67 providing and fixing 110mm x 75mm size pvc finolex type a floor trap isi marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads an lifts 68 providing and fixing c.p.towel ring complete with c.p. brass brackets fixed to wooden plugs with c.p. screws including carriage of materials within all leads and lifts. :- 600mm x 20mmm size 69 providing and fixing c.p. towel rail complete with c.p. brass brackets fixed to wooden plugs with c.p. brass screws 600mm x 20mmm size. 70 providing and fixing chromium plated brass soap dish with c.p. brass brackets fixed to wooden cleats with c.p. brass screws 71 providing and fixing looking mirror of size 600mmx450mm with plastic frame (superior quality) including backing support and fixing with screws etc at site as directed by engineer-in-charge including carriage of materials within all leads and lifts 72 providing and fixing 600mmx120mm acraylic glass shelf with c.p. brass bracket and guard rail complete, fixed to wooden plugs with c.p. brass screws including carriage of materials within all leads and lifts 73 providing and fixing plain 1st class deodar wood square edged cover fillets (beading ) 40 x 12 mm section with wood screws in ceiling and lining including mitring at junctions incliding carriage of material in all leads and lifts 74 providing and fixing 1.50 mm thick pvc/rubber tiles flooring plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts 75 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-incharge. (glazing, paneling and dash fasteners to be paid for separately) (i) for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron) 76 for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required (fittings shall be paid for separately) powder coated aluminium (minimum thickness of powder coating 50 micron) 77 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item):with float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) 78 providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge 79 disposal of surplus excavated earth by mechanical with in all leads on approved dumping site of m.c. shimla or otherwise including payment of prescribed charges of dumping to the owener of dumping site through all mode of transportation including head load animal load or mechanical means alongwith its leveling and to complete the work of mechanized means and labour (if any required).the dumping site to be arranged by the contractor entirely at his own risk and cost. all useful materials such as stones, aggregate and slates shall be sorted out and stacked along roads side any loss of the public/private property during the course of diisposal shall be the absolute responsibility of the contractor which shall have to be dully compensated by him in all respect as per direction of engineer-in-charge please enable macros to view boq information