tender for repair and painting of hydro power training institute (hpti) hostel building at cps-1, khairi.; 1 wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :two or more coats on new work. 2 finishing walls with acrylic smooth exterior paint of required shade :old work (two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. 3 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 4 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 5 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. with cement mortar 1:4 (1 cement : 4 fine sand). 6 providing and fixing wire gauge shutters using galvanized m.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters, with isi marked m.s. pressed butt hinges bright finished of required size, kiln seasoned and chemically treated hollock wood. 7 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with 2nd class teak wood beading 62x19 mm. 8 providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.kiln seasoned and chemically treated hollock wood 35 mm thick. 9 renewing glass panes, with wooden fillets wherever necessary float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 10 applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). 11 painting with synthetic enamel paint of approved brand and manufacture to give an even shade :two or more coats on new work. 12 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work. 13 painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :100 mm diameter pipes. 14 painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :75 mm diameter pipes. 15 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, hickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m35 grade with approved colour, design & pattern. 16 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in – charge nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 17 providing and fixing to existing door frames 30 mm thick fiberglass reinforced plastic (f.r.p.) flush door shutter in different plain and wood finish made with fire retardant rade unsaturated polyester resin, moulded to 3 mm thick frp laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (puf)/polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of f.r.p. laminate conforming to table - 3 of is: 14856, complete as per direction of engineer-in-charge. 18 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia. nominal bore. 19 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge, 15 mm nominal dia. 20 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels granite of any colour and shade area of slab over 0.50 sqm. 21 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : range of two urinal basins with 5 litre white p.v.c. automatic flushing cistern. 22 centering and shuttering including strutting, propping etc. and removal of form for :edges of slabs and breaks in floors and walls under 20 cm wide. 23 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size).