tender for construction work of boundary wall and interlocking road of it city site office - earth work in excavation by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains (not exccoding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bortoma, lif up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a load of 50 m. all kinds of soil. dsr-2023-2.8.1 2 excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km, also including ramming and watering of the carth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc., complete. dsr 2023-2.25a 3 filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (two part of good earth & one port of manure) and placing them on approprite place ivc carriage of earth, manure and pots up to 50 mt. as per direction of officer incharge. (the cost of good earth, earthen pots & manure will be paid seperately.), clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 in outside the periphery of the arca cleared. dsr-2020 (horticulture)-2.3.1.i 4 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work up to plinth level 1:4:8 (1 cement: 4 coarse sand (zone-iii) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) dsr 2023-4.1.8 5 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work up to plinth level 1:1½:3 (1 cement: 1½ coarse sand(zone-iii) derived from natural sources 3 graded stone aggregate 20 mm nominal size derived from natural sources). dsr no. 2023-4.1.2 6 supply & fixing of reflective sign board (double side) of size 1.5x120 m retro reflective sheeting of hip grade type-iv the board shall be fixed on 50 mm ss 304 grade pipe and reflective sheet on 4 mm thick, acp sheet of standard make as per morth specification. the board shall be fixed using 2 man post 45x45x60 cm concrete foundation. the stainless steel joint welding of ss pipe work shall be band and grinder properly inchading bufling so an to give uniform shining at weded joints. the retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per irc 67 2012 & proof of the same in form of government report shall be uploaded while quoting tender pwd sor 2020-21/chapter traffic sign work morth-801 (8.6) base-1059 7 mild steel or iron work in plain work such as in r.c.c. or ilb. (when not included in an over all rates) including bending for proper completion of the work and including supply of steel and its wastage, bends, hooks and authorised overlaps shall be measured up to floor two level 8 centering and shuttering including strutting, propping etc. and removal of form for, foundations, footings, bases of columns, etc. for mass concrete dsr 2023-5.9.1 9 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level 1:1.5:3 (1 cement: 1.5 coarse sand (zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)dsr 2023-5.1.2 10 reinforced cemment concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc, above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement, 1:15:3 (1 cement: 1.5 coarse sand(zone-iii)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 2023-5.2.2 11 brick work with common burnt clay fps. (non modular) bricks of class designation 7.5 in foundation and plinth in, cement mortar 1.4 (1 cement: 4 course sand) dsr 2023-6.1.1 12 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shupes and sizes in cement mortar 1:4 (1 cement 4 coarve sand) dsr 2023-6.4.1 13 12 mm cement plaster of mis, 1:4 (1 cement: 4 coarse sand) providing and applying white cement based putty of average thickness i run, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dsr 2023-13.4.1 14 providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dar 2023-13.80 15 painting on g.s. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, new work (two or more costa) including a cout of approved steel primer but excluding a coat of mordant solution. dsr 2023-13.53.1 16 supply and fixing of led street light fitting having die cast aluminium body potted driver with 4+10kv spd and diffuser with driver set suitable for 52 watt to 72 watt. confirming to ip66 protection complete in all respect. mr (e/m sor-2018 (1422) 17 supply & fixing of 7 mtr g1 octagonal pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12min thik) having 3mm thikness with double arm bracket (1 mtr length) on rcc foundation including the cost of foundation, foundation bolts, excavation & back filling and required t&p completee in all respect. mr (e/m sor-2018 (641) 18 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade:, new work (two or more coats applied @ 1.43 itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) dsr2023-13.47.1 19 construction of granular sub-base by providing well graded matarial, spreading in uniformlayers with motor grader on prepared surface, mixing by mix in place method with rotamator at omc and compacting with smooth wheel roller to achieve the desired density complete as per technical specification clause 401 20 providing and laying factory made chamfered edge cement concrete paver blocks in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturers specifications & direction of engineer in-charge, 80mm thick cement concrete paver block of m-30 grade with approved colour, design & pattern. dsr 2023-16.91.2 21 providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.l. staples and g.1. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.)/spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately) dsr 2023-16.53