tender for toilets and miscellaneous works in village balrampur - excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 m and lead upto 30 m . including filling watering and ramming of excavated earth into the space between the building and sides of foudation trenches including all t&p phawarah and basket etc. complete.s.i. no. 251 2 concrete with 40 mm gauge brick ballast, fine sand of 1.25 f.m and cement in proportion of 8:4:1 in foundation including supply of all materials, labour and t&p etc. required for proper completion of the work.s.i. no.275 3 m-150 brick work in 1:4 cement and fine sand of 1.25 f.m. mortor in foudation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work.s.i. no. 305 4 d.p.c at plinth- s.i. no. 303 s.i. no. 361 5 earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not eceeding ½ meter (20) in depth and earth work in embankment to be in 20 cm. (8) layers, including slopes and also including 1.5 m. (5 ft.) lift and 30 m. (100) lead. the earth from cutting to be used in marking embankent or to be deposited as spoil banks within 30m. (100) distance as directed by the engineer-in-charge s.i. no. 253 6 m-150 brick work in 1:4 cement and coarse sand of 1.25 f.m. mortor in s/s including supply of all materials, labour and t&p etc. required for proper completion of the work. s.i. no.- 305+309+310+310a 7 r.c.c. work with cement, approved coarse sand and 2 cm. gauge approved stone ballast in the proportion of1:2:4 in slab excluding s/o reinforcement and its bending but including its fixing and binding be same with 24 b.w.g. g.i. binding wire and inclucding necessary centring and shutering etc.& also i/c supply of materials required for proper completion of the work. s.i. no. 284(a) 8 supply & fixing of aluminium sheet door 9 mild steel or iron in plan work such as reinforced concrete or reinforced brick work ( when not included over all rates) wrought to required shape as necessary including bending for proper completion of the work. s.i. no.- 504 10 supply & fixing of aluminium sheet door 11 mild steel or iron work of small size and section such as holding down bolts, hold fast tie rods grating etc. wrought to required shape as necessary for bending etc. including supply of steel and its wastage including cost of bolts nuts if required for welding grinding and making holes as requireds.i. no. 502 ( ii) 12 12mm thick plaster work in 1:3 with cement & coarse sand mortar. s.i. no. 583 13 concrete with 40 mm gauge brick ballast, fine sand of 1.25 f.m and cement in proportion of 8:4:1 in foundation including supply of all materials, labour and t&p etc. required for proper completion of the work.s.i. no.275 14 20 mm thick plaster 1:2 with cement & approvedcoarse sand mortar including supply of material,labour, t&p etc all complete. s.i. no. 597 15 supply & fixing 5 mm thick approved china white/colour glazed tilesin flooring of dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment & ploishing completion of the work. (size of tiles upto 300 x 300 mm) s.i. no. 628 16 finishing walls (two coat) with water proofing cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials labour and toos and plants etc. required for proper completion of the work s.i. no. 660+661 17 applying priming coat over new steel or wood surfaces including prepairing the surface by throughly cleaning oil, grease, dirt and other foreign matter.s.i. no. 641+642 18 supply of pvc pipe (110 mm dia) 19 supply of g.i. pipe 25 mm nominal size 20 supply of white glazed earthen ware (indian type) w.c. pan 510 mm dia 21 eropian type pan 22 supply of syphon 23 hand wash basin 550×400 mm size of white glazed earthen ware 24 supply of gents unrinal pot 25 supply of c.p. bib cock 26 providing of submersible water pump 1.00 hp with boaring, lowering of pvc pipe etc. all complete. 27 supply ofpvc water tank (1 no. 1000 ltr.) 28 low level cistern 10 ltr. capacity 29 supply of fitting material (socket,cross tee,jamnut, elbow,gate wall,union,screw,nipple etc.) 30 labour charge for all fitting of water supply & plumbing work 31 electrification work all supply labour t&p 32 conc. of miscellaneous (as per attached) 33 supply & fixing of sign board,letter writting, logo & etc.