tender for work of kayakalp yojna in primary school ii pahadpurwa mau - excavation in foundation in ordinary soil ( loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches. si no. 253 2 construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density complete as per technical specification clause 401. 3 cement concrete with 4cm (1/2) gauge approved stone ballast, approved coarse sand. cement in the proportion 8:4:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. si no. 281 4 providing and laying of rubble moulded zig-zag interlocking concrete block pavements having thickness 80mm as per drawings and technical specification clause 1504 5 dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the engineer-in-charge within a distance of 60metres. si no 697 6 murga jali ½ x 24 gauge 7 cement concrete with 4cm (1/2) gauge approved stone ballast, approved coarse sand. cement in the proportion 4:2:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. si no. 279 8 dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the engineer-in-charge within a distance of 60metres. si no 697 9 12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of find sand of 1.25 fineness modulus. si no 584 10 mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, tierods, gratings, etc. (when not included in over all rates) wrought to required from excluding supply of steel bolts, nuts wastage etc and including their fixing required for proper completion of the work. si no 502 11 painting or vernishing new iron work in small areas or new wood work with one coat (up to one sq. meter) of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials labour and tools and plants etc. required for proper completion of the work. paint to be used should confirm the isi no. 103-1950. si 641 12 supply and fixing of brass bib cock 13 supply and fixing of stop cock 14 supply and fixing low 15 supply and fixing 20mm gi pipe 16 class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. si no. 305 17 12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of find sand of 1.25 fineness modulus. si no 584 18 painting in boundry 19 rcc work with cementapproved coarse sand and 2cm. (3/4) gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.i wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost. si no 284 20 supply and fixing 35mm thick sitapur ply door shutter si 470a 21 site cleaning 22 18% gst