BRR : 9447872
Tender Brief : Tender For Daily Mechanised Cleaning And General Annual Maintenance And Repair Works At Vvip Guest House Mainpuri, 1 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(SOR No.9.83) 2 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours,... Read More
Tender Value
₹
7,64,914
Submission Date
25-07-2024
Participated Bidder List
4 No of Bidder(s)
| Sr No. | Bidder Name | Bid Analytics | Technical Bid | Financial Bid | AOC | Bid Value | Rank |
|---|---|---|---|---|---|---|---|
| 1 | cnet-technologies | Bid Analytics | |||||
| 2 | cnet-technologies | Bid Analytics | |||||
| 3 | cnet-technologies | Bid Analytics | |||||
| 4 | cnet-technologies | Bid Analytics |
Work Detail
tender for daily mechanised cleaning and general annual maintenance and repair works at vvip guest house mainpuri, 1 providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(sor no.9.83) 2 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete.(sor no.11.4) 3 providing and fixing unplasticised -pvc pipe clips of approved design to unplasticised - pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with m.s. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm dia(sor no.12.43.2) 4 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(sor no.13.80) 5 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturerincluding applying additional coats wherever required to achieve even shade and colour old work (one or more coats)(sor no.13.81.1) 6 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete(sor no.13.88) 7 finishing walls with acrylic smooth exterior paint of required shade :old work (two or more coats )(sor no.13.111.1) 8 varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.(sor no.13.115) 9 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge.with cement mortar 1:4 (1 cement : 4 corse sand)(sor no.14.1.2) 10 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)(sor no.14.5.2) 11 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :w.c. pan with isi marked white solid plastic seat and lid(sor no.17.2.1) 12 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china wash basin size 550x400 mm with a pair of 15 mm c.p. brass pillar taps(sor no.17.7.3) 13 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete.(sor no.17.31) 14 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.(sor no.17.73.2) 15 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :25mm dia(sor no.18.17.1) 16 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 400gm) ( l & k and equi.) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work.(sor no.18.15.1) 17 providing and fixing 20mm dia isi approved cpvc pipes complete with special such as bends,tee,socket,cross,clamp etc earth work including filling the trenches etc required for proper completion of work .the rate also includes concealed gi fitting where required ,utting and making good the walls etc and all material labour and t&pcomplete.(sor no. 18.7.2) 18 providing and fixing 25 mm dia isi approved cpvc pipes complete with special such as bends,tee,socket,cross,clamp etc earth work including filling the trenches etc required for proper completion of work .the rate also includes concealed gi fitting where required ,utting and making good the walls etc and all material labour and t&pcomplete.(sor no.18.7.3) 19 cp brassstop cock 15 mm dia. heavy quality ( 400gm) ( l & k and equi.)(sor no.18.16.1) 20 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :25 mm nominal bore(sor no. 18.17.1) 21 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item):with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)(sor no.21.3.2) 22 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required..group c(sor no. 1.10.3) 23 wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit along with 1 no 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required.(sor no. 1.12) 24 supplying and drawing following 3 x 2.5 sq. mm sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.(sor no.1.17.12) 25 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet(sor no. 1.24.4) 26 supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).(sor no.2.2) 27 supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).(sor no. 2.3) 28 providing circular cement concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 nos ( 3 nos horizontal & 4 nos vertical “ u “ shape) m.s. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of officer-in-charge. top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm & with wall thickness of 25.4 mm(sor no.2.30.1) 29 supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :screened through sieve of i.s. designation 20 mm (sor no. 2.4.1) 30 removal of garden waste by tata 407 or equivalent including loading/ unloading and carriage upto 1 km lead,complete disposal upto designated place as per direction of officer-in-charge . (sor no. 2.60) 31 complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (cost of good earth, manure, fertilizer, insecticide, pesticide will be provided by the department & lawn mover and brush cutter with fuel and other t & p material/articles shall be provided by the contractor.) and as per direction of officer in charge. (1 mali for 3.00acre ) open spaces. 200sqm lawan area x 30 days=5000sqm per month (sor no. 2.40.6) 32 anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used chlorpyriphos 20% ec in the ratio of 1% concentration and as per direction of officer-in-charge. (sor no. 2.54) 33 providing and displaying of areca palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in25cmsizeofearthenpot/plasticpot&asperdirectionofthe officer-in-charge.(sor no. 3.18) 34 providing and displaying of brassia variegated having ht. 30 cm to 45 cm, well developed with fresh and healthy foliage in 25 cm size of earthen pot/plastic pot. & as per direction of the officer-in-charge.(sor no.3.24) 35 providing and displaying sunflower hybrid well developed 15 to 20 cm ht. with fresh & healthy foliage at blooming stage in 20 cm earthen pot/plastic pot and as per direction of the officer-in-charge. (sor no. 4.80) 36 providing and stacking of bottle palm of ht. 150-180 cm bottom girth 20-25cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.(sor no. 7.10) 37 providing and stacking of delonix regia (gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v (sor no.7.24) 38 providing and stacking of plant mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm earthen pot/plastic pot and as per direction of the officer-in-charge.(sor no. 4.88) 39 providing and stacking of polyalthia pendula (ashok pendula) of height 180-195cm.ingunnybagofsize30cmasperdirectionofthe officer-in-charge.(sor no. 7.77) 40 providing and stacking of ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge. (sor no. 8.28) 41 cleaning panes of glass with spirit of caustic soda includind supply of all matrrial labour& t&p etc. required of proper completion of work.(sor no. 20.09 ) 42 same as in sor no.20.12 above but for inspection chamber.(sor no. 20.13) 43 claening of main drain or width more than 300mmincluding disposal of waste refuses sludge outside the boards area including washing and cleaning by clean water completly as per direction ofengineer in charge including cost of labour material t&p etc. required for proper completion of the work.(sor no.20.14) 44 cleaning and opening of chocked w.c./bath/kitchen pipe line including opening and refixing of chamber cover including washing etc.complete (analysis based on nbo-11 25.020.(sor no.20.19) 45 cleaning of existing pipe line of different dia. ranging from 4 to 2 dia. including digging trenches and refilling, opening of pipes, cleaning of pipes, cutting, threading, if required fixing and including making good the road, wall etc as directed by the engineer i/c.(sor no. 20.26) 46 cleaning of existing water pipe line of different dia up to 2 dia including digging trenches and refilling,opening and cleaning of pipes,cutting,threading,if required fixing and including making good the road and wall etc. as directed by the engineer in charge.(sor no. 20.26 b ) 47 extraction of defective vt or sub-merssible pump & with 60x90column pipe and then lowering of the repaired pump and motor with pipe and testing th same, including checking mains cut outs, fuses&operation of tube well for 24 hrs. for its smooth and normal working including cost of all material, labour and t&p etc. required for proper completion of work.(sor no. 20.28) 48 servicing of a.c (for window/split) by authorised service centre complete in all respect including all laboud and t&p (sor no. 20.30) 49 servicing of a.c and filling gas ( for window/split) by authorised service centre complete in all respect including all laboud and t&p (sor no. 20.31) 50 rewinding of burnt ceiling fan with approved copper wire including cost of all materials, labour and t&p etc. complete (burnt wirewill not be taken back.)(sor no.22.08) 51 supply and replacing of burnt and damaged condenser of ceilingfan of approved quality including all materials,labour and t&petc.(sor no. 22.09) 52 taking off the defective ceiling fan from position & re hanging after receiving the repaired fan and proper connection etc.(sor no.22.10) 53 attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as below.(sor no. 22.18) 54 cleaning and sweeping of roof of residence as and when requiredincluding uprooting of rank vegetation and disposal of thegarbage upto 50 m. roof area 150sqm x 4 time in each month x 12 month totalroof area 7200 sqm inone year. (sor no.22.20) 55 claening of toilets of non residential buildings including cost of detergent powder,horpic,phynyl and suitable acid etc. required for proper completion of the work.(sor no.22.22) 56 providing catering services in erectorhostels/guest houses/ inspection houses upto 4 suits including,aintenance and cleaning of cutlery, crockery and also including provision of morning/evening tea and meals on payment basis to the guests/ occupants. (sor no.23.01 a) 57 house keeping of all suits,dormitary,dining hall, kitchen and outer area that include lobby,stairs,road, parking including cleaning/ sweeping/ dusting and preperation of bed with clean and ironed bed sheet/ house keeping of all suits, dormitary, dining hall, kitchen & outer area that include lobby, stairs, road, parking including cleaning/sweeping/dustingand praparation of bed with clean and ironed bed sheet /cover/pillows/blanket etc. proper cleaning of bathroom, providing with soap, bath soap, shampoo pouch, odonil, sanitry cubes, cleaning big and small towel, mosquito repellant as and when required its also add removal of rubbish from permises. rates include all labour, material, t & p required for proper completion of work. (for one month per sqm of carpet area) (approx-550 sqm total inner &outercarpet area in one month hence 12x500=6000 sqm for one year)(sor no. 23.18) 58 providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and t&p etc.required for proper completion of the work. (sor no. 27.19) 59 supply and fixing of 3 blade wall fan ofhavells platina 400 mm or equivalent including all material, t&petc required for proper completion of work as approved by engineer in charge.(sor no. 28.37) 60 supply and fixing of led tube light batten fitting suitable for up to 1 x 22 watt led tube light on surface complete in all respect.(sor no. 28.41)
View Original Notice/Document
Result Documents
Tender Documents
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender
Technical Evaluation In Progress
Technical bid evaluation is currently in progress. Awarded bidder details will be available after completion of technical scrutiny.
TechnicalBid
Similar Tenders Results