tender for construction of drinking water facility and library room at govt. higher education school, dhakiya ragha, block tilhar, district- shahjahanpur (u.p.), excavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 30 mt. (100 fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earthas directed by the engineer-incharges upto a distance of 30mt. (100 fts) from the foundation trenches. filling of carted earth. providing and laying cement concrete 1:4:8 (1 cement:4 coarse sand 18 graded stone aggregate 40 mm nominal size) including supply of all materials, labour t & p rtcrequired for proper completion of the work and curing complete also including cost of formwork in foundation & floors. sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour t & p etc required for proper completion of work. providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground. (4) treatment of soil along external perimeter of building 7.5 liters/sqm. (5) treatment of soil under apron along external perimter 5 liters/sqm. r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wireand including necessary centering and shuttering etcand also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than m-20. asin item no. 6 above but for slabs (using 1:1.5:3 mix concrete) as in item 6 but for the lighter beamsi.e. having spans upto 6 m. (using 1:1.5:3 mix concrete) as in item no. 6 above but for column (using 1:1.5:3 mix concrete). all work up to plinth level ground floor all work above plinth level as in item 6 above but in r.c.c. raft foundation & footing (using 1:1.5:3 mix concrete) m-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and t&p etcrequired for proper completion of the work. painting on d.p.c. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7kg/sqm approx including cost of fuel if any. m-150 brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to beless than 1.5 brick thick. (1:6 cement & coarse sand) same as in item no. 11 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. providing & laying brick coba 12mm thick laid with m-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour t& petc complete for proper completion of work. providing and fixing isi marked flush door shutters conforming to is: 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 35 mm thick extra for double leaf door shutters extra for providing and fixing flush doors with decorative veneering instead ofnon decorative isi marked flush door shutters conforming to is: 2202 (part i) mild steel or iron work of small sizes and sections such as holding down bolts, hold fasttierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. hold fast for chaukhats of doors/windows. door/windows & staircase grill. providing and fixing m.s. tubular frames for doors, windows, ventilators and cupboard with rectangular/ l-type sections, made of 1.60 mm thick m.s. sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. tmt fe-500 or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and overlapping & hooks. fixing of door, windows/ventilators chaukhats in position. (a) door fixing of door, windows/ventilators chaukhats in position. (b) windows 15 mm plinth plaster (1 cement :4 coarse sand) 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement: 6 coarse sand. 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement: 6 coarse sand providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all coloursand shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc, complete. size of tile 600x600 mm providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all coloursand shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high glossfinish etc. complete at all levels. providing and fixing 18 mm thick gang saw cut, mirror polished, premouldedand prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high glossfinish etc. complete at all levels. providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high glossfinish etc. complete at all levels. supply & fixing 6 mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labours & tools etc, required for completion of the work. (size of tiles upto 200x 300 mm). 25mm thick 1:2:4 plain cement concrete floor (1 cement: 2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one lay er neat cement. painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi- pa gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. same as item above but on new wood surface. finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 143 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) distempering (two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (ceiling) providing and applying white cement based putty of average thickness 1 mm, of approved brand & anufacturer, over the plastered wall surface to prepare the surface even & smooth complete. providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes providing and fixing stainless steel sliding door bolts isi marked to required colour or shade with nuts and screws etc. complete: 300x10 mm providing and fixing stainless steel tower bolts with necessary screws etc. complete(a) 250 mm x 10mm (a) 200 mm x 10mm providing and fixing stainless steel handles with screws etc. complete (a) 125 mm making drain along with the apron. providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a including jointing with seal ring conforming to is :5382 leaving 10 mm gap for thermal expansion. (i) single socketed pipes. 110mm diameter making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over pvc sheet 1mx 1m x400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement.punning rounding the edges and making and finishing the outlet complete. providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design:in 75x75 mm deep chase providing and fixing on wall face unplasticised - pvcmoulded fittings/accessories for unplasticised rigid pvc rain water pipes conforming to is 13592 type a, including jointing with seal ring conforming to is: 5382, leaving 10 mm gap for thermal expansion. single push fit coupler 110 mm dia single tee with door 110x110x110 mm providing and fixing unplasticised -pvc pipe clips of approved design to unplasticised - pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.110mm providing, fixing g. i. pipes complete with g. i. fittings and clamps including cutting and making good the walls etc.(a) 15 mm dia providing & fixing gi. pipes complete with gi. fittings & clamps including cutting & making good the walls etc. (internal work) 25 mm dia nominal bore providing & fixing cp. brasslong body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore providing and fixing ball valve (brass) of approved quality, high or low pressure, with plasticfloats complete 25 mm nominal bore providing and placing on terrace (at all floor levels) polyethylene water storage tank. is:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. providing and fixing injection moulded swrfloor trap of self cleaning design with top tile and strainer including cost of cutting and making good walls and floors. the jointing of pipes to the floor trap is to be complete with solvent cement/lubricanta) 100 mm inlet and 75 mm outlet construction of soak pit 1.20x1.20x1.20 mtr filled with brick bats including s.w. drain pipe 100 mm dia and 1.20 mtr long complete as per standard design wiring points for light with 1.5 sqmm.frlsh pvc insulated single corealuminium condutor cable in pvc conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.frlsh pvc insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. sameasitem no. (1) but for fan and light duty exhaust fan. same as item no. (1) but for 5 amp plug point with piano type switch and socket etc. addition for light / fan points with modular type switch in place of piono type switch. addition for plug points with modular type switch in place of piono type switch. supply & wiring of submains with 2 nos. 2.5 sqmm & with 1 no. earth wire of 1.5 sq.mm frlsh pvc insulated 1100 v grade single core multistrand copper conductor cable in existing pvc conduit complete, including supply of all material, labourand t&p etc. required for proper completion of the work as directed by engineer i/c. supply and wiring of submain 2 number 4 sqmm.frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty (2 mm thick) 20mm dia pvc conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm frlsh pvc insulated multistranded copper cable as earth contunity wire etc. complete in all respects. conductor. supply and wiring of submain 4 number 10 sqmm. frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty (2 mm thick) 32mm dia pvc conduit partly concealed in wall and partly laid in slab along with two number 10 sqmm frlsh pvc insulated multistranded copper conductor cableas earth contunity wire etc. complete in all respects. supply fixing and concealing of 20mm dia.2mm thick pvc conduit pipe with isi mark embossed and with pvc acessories confirming to is no. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid.plastering with cement sand mortar finished to level with matching colour including cost of material labour and t & p etc required for proper completion of work. erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick gi. pipe 19mm dia duly painted, complete in all respects. supply and fixing hexagonal/round gf. fan box of approved make made up of 1.0mm thick isi marked g.p. sheet spot weeldeed four to eight holes of 254 mm for pipe entry of the box. holes should be semi-shuttered type with 0.5mm gp. sheet made upper & lower cover duly screewed fitted with 300mm round zink coted m.s bar x 12mm & brand name should be embossed. fixing with wiring conduit laid in the r.c.c roof before concreting alongwith supply of all material, labour, t&p etc. required for proper completion of the work. supply fixing of electronicfan regulator (modular) 120-280 v.isi marked, on the existing switch board including making connetion, required material, labour t/p etc for proper completion of work to the satisfaction of engineer in charge of work. supply and ceiling fan with fan motor of ac permanent insulation, capacitor rating conforming bee 5 star rating and is: 374/79 and also comply with is:1709/1984 with latest amendment. the rated voltage 220/240 volt 50hz, 1-ph ac the fan assemble should consist of downrod blades, shackle canopies etcand with double ball breaing system bee 5 starrated-1200 mm sweep supply & fixing of led tube light with batten suitable for up to 1 x 22 watt led tube light complete including tube etc on surface complete in all respects. (cat: suuply and fixing of water tight oblong 10 watt led bulhead luminaire with driverr set confirming to ip 65 and above protection complete in all respect. (cat: supply and fixing of surface/flush mounting distribution boards with additional metal door withot mcb complete in all respects.6 way tpn supply and fixing of 6amp to 32 amp (10 ka) mcb in existing mcb, db complete with connections as required. supply and fixing of power plug with 20a/250 v flush type modular switch and 5 pin 20 a/250v flush type universal modular socket switch on concealed m.s. box including supply of all material, labour t&p etc. required for proper completion of work. supply and fixing single pole mcbs blanking plate complete in all respects. supply & fixing of fire extinguishers, abc type 4.00 kg capacity (isi marked is: 15683 & tac approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. supply & fixing of fire extinguishers, co2 type 4.50 kg capacity (isi marked is: 15683 & tac approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. providing and fixing of water cooler including all fittings etc. complete cost of submersible pump with boring