tender for construction of drinking water facility, toilet block and library room at government girls inter college kheda nawada, block- kanth, district - shahjahanpur (u.p.), , excavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 30 mt. (100 fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-incharges upto a distance of 30mt (100 fts) from the foundation trenches. filling of carted earth. providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand 18 graded stone aggregate 40 mm nominal size) including supply of all materials, labour t & p rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour t & p etc required for proper completion of work. providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground. (4) treatment of soil along external perimeter of building 7.5 liters/sqm. (5) treatment of soil under apron along external perimter 5 liters/sqm. r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than m-20. as in item no. 6 above but for slabs (using 1:1.5:3 mix concrete) as in item 6 but for the lighter beams ie, having spans upto 6 m. (using 1:1.5:3 mix concrete) m-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and t & p etc required for proper completion of the work. painting on d.p.c. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7kg/sqm approx including cost of fuel if any. m-150 brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick (1:6 cement & coarse sand) same as in item no. 11 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. providing & laying brick coba 12mm thick laid with m-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour t& p etc complete for proper completion of work. providing and fixing isi marked flush door shutters conforming to is: 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 35 mm thick extra for providing and fixing flush doors with decorative veneering instead of non decorative isi marked flush door shutters conforming to is: 2202 (part i) mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierodsgratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. hold fast for chaukhats of doors/windows. door / windows & staircase grill providing and fixing m.s. tubular frames for doors, windows, ventilators and cupboard with rectangular/ l-type sections, made of 1.60 mm thick m.s. sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. tmt fe-500 or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks. fixing of door, windows/ventilators chaukhats in position. (a) door fixing of door, windows/ventilators chaukhats in position. (c) ventilator chaukhats 15 mm plinth plaster (1 cement:4 coarse sand) 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement: 6 coarse sand. 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement: 6 coarse sand providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windowsills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. supply & fixing 6 mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labours & tools etc, required for completion of the work. (size of tiles upto 200x 300 mm). 40 mm thick 1:2:4 plain cement concrete floor (1 cement:2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. 20 mm thick cement plaster in dado/ skirting in 1:3 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour t & p etc. required for proper completion of the work. 25mm thick 1:2:4 plain cement concrete floor (1 cement:2 coarse sand 4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi-gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. same as item above but on new wood surface. finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) distempering (two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (ceiling) providing and applying white cement based putty of average thickness 1 mm, of approved brand & anufacturer, over the plastered wall surface to prepare the surface even & smooth complete. providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes providing and fixing stainless steel sliding door bolts isi marked to required colour or shade with nuts and screws etc. complete :300x10 mm providing and fixing stainless steel tower bolts with necessary screws etc. complete (a) 250 mm x 10mm (a) 200 mm x 10mm providing and fixing stainless steel handles with screws etc. complete (a) 125 mm making drain along with the apron. providing and fixing water closet squatting pan (indian type w.c. pan) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required w.c. pan with isi marked white plastic seat and lid providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china flat back wash basin size 550x 400 mm with single 15 mm c.p. brass pillar tap. providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :one urinal basin with 5 litre white p.v.c. automatic flushing cistern providing and fixing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete.semi rigid pipe a) 32mm dia providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. providing and fixing 8 mm dia c.p./s.s. jet with flexible tube upto 1 meter long with s.s. triangular plate for eureopean type w.c. of quality and make as approved by engineer-in-charge.15mm nominal bore providing and fixing ptmt liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms. providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion (i) single socketed pipes. 110mm diameter making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over pvc sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement,punning rounding the edges and making and finishing the outlet complete. providing and fixing on wall face unplasticised pvc moulded fittings/accessories for unplasticised rigid pvc rain water pipes conforming to is 13592 type a. including jointing with seal ring conforming to is: 5382, leaving 10 mm gap for thermal expansion. single push fit coupler 110 mm dia single tee with door 110x110x110 mm providing and fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.110mm providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. providing, fixing g. i. pipes complete with g. i. fittings and clamps including cutting and making good the walls etc. (a) 15 mm dia providing & fixing g.i. pipes complete with g.i. fittings & clamps including cutting & making good the walls etc. (internal work)25 mm dia nominal bore painting g.i. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality. 25 mm dia nominal bore. providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work exposed on wall25mm dia nominal outer dia pipes providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge concealed work including cutting chases and making good the walls etc..15mm dia nominal outer dia pipes providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes providing and fixing 45 cm long unplasticised pvc connection pipe with brass unions.15mm nominal bore providing & fixing cp brass bib cock of approved quality conforming to is 8931 15mm nominal bore providing & fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore providing & fixing c.p. brass angle valve for basin mixer and gyser points of approved quality conforming to is 893115mm nominal bore providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete 25 mm nominal bore providing and fixing brass stop cock of approved quality for internal toilet 20 mm nominal bore making connection of g.i. distribution branch with g.i. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore providing and placing on terrace (at all floor levels) polyethylene water storage tank. is:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.pipes, cables etc. exceeding 80mm dia. but not exceeding 300 mm dia. providing, laying and joining glazed stone ware pipes class sp-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete. 100mm diameter providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand 10 graded stone aggregate 40mm nominal size) alround s.w. pipes including bed concrete as per standard design.100mm diameter s.w. pipe providing and fixing square mouth s.w. gully trap class sp-1 complete with c.i. grating brick masonry chamber with water tight c.i. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:150 x 100 mm. size p type with sewer bricks conforming to is: 4885 constructing brick masonry manhole in cement mortar 1:4 (1 cement 14 coarse sand) rcc top slab with 1:2:4 mix (1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand 18 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement 12 coarse sand 4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design inside size 90x80cms and 45cms deep including ci cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). with fps bricks of class designation 75 (i) for sewer line supply and fixing of upvc s.w.r. pipe type-b confirming to is-13592 including jointing the pipes with rubber ring lubricant and upvc swr cupler confirming to is 14735. also including excavation of treanches cutting of walls and holes and repairing the wallsfloors and refilling the trenches as before but excluding supply and cost of other fittlings such as elbow,bend,tee and y-tee including supply of al marerial labour and t&p.required for proper completion of work. 75 mm o.d. 110 mm o.d. providing and fixing injection moulded swr floor trap of self cleaning design with top tile and strainer including cost of cutting and making good walls and floors. the jointing of pipes to the floor trap is to be complete with solvent cement/lubricanta) 100 mm inlet and 75 mm outlet supply and fixing of upvc s.w.r. pipe nahni trap size 100x75,110/90 mm confirming to is-14735 self cleaning design fixed in pcc 1:2:4 and supply and fixing of 125 mm dia heavy duty cp brass jali supply and fixing of upvc s.w.r. plain bend confirming to is-14735. size 75 mm size 110 mm supply and fixing of upvc s.w.r. cowel confirming to is-14735.size 75/90 mm size 110 mm construction of soak pit 1.20x1.20x1.20 mtr filled with brick bats including s.w. drain pipe 100 mm dia and 1.20 mtr long complete as per standard design construction of septic tank with earth work in foundation, base cement concrete in 1:2:4 mix, brick work for foundation in 1:4, rcc slab,rainforcement work with mainhole 2nos and plaster, with all accessories complete work size 3.00x1.50x2.30 m making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and s.w. drain pipe 100 mm diameter, 1.8m long complete as per standard design. with f.p.s. bricks wiring points for light with 1.5 sqmm.frlsh pvc insulated single core aluminium condutor cable in pvc conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.frlsh pvc insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. same as item no. (1) but for fan and light duty exhaust fan. same as item no.(1) but for 5 amp plug point with piano type switch and socket etc. addition for light / fan points with modular type switch in place of piono type switch. addition for plug points with modular type switch in place of piono type switch. addition for hpsv/exhaust fan points with modular type switch in place of piono type switch. supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm frlsh pvc insulated 1100 v grade single core multistrand copper conductor cable in existing pvc conduit complete, including supply of all material. labourand t&p etc. required for proper completion of the work as directed by engineer i/c. supply and wiring of submain 2 number 4 sqmm. frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty (2 mm thick ) 20mm dia pvc conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm frlsh pvc insulated multistranded copper cable as earth contunity wire etc. complete in all respects. conductor. supply and wiring of submain 2 number 6 sqmm. frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty(2 mm thick ) 25mm dia pvc conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm frlsh pvc insulated multistranded copper conductor. cable as earth contunity wire etc. complete in all respects. supply and wiring of submain 4 number 10 sqmm. frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty(2 mm thick ) 32mm dia pvc conduit partly concealed in wall and partly laid in slab along with two number 10 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. supply fixing and concealing of 20mm dia.2mm thick pvc conduit pipe with isi mark embossed and with pvc acessories confirming to is no. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and t & p etc required for proper completion of work. erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick g.i. pipe 19mm dia duly painted, complete in all respects. erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc, complete in all respects. supply and fixing hexagonal/round g.p. fan box of approved make made up of 1.0mm thick isi marked g.p. sheet spot weeldeed four to eight holes of 25.4 mm for pipe entry of the box. holes should be semi-shuttered type with 0.5mm g.p. sheet made upper & lower cover duly screewed fitted with 300mm round zink coted m.s bar x 12mm & brand name should be embossed. fixing with wiring conduit laid in the r.c.c roof before concreting alongwith supply of all material, labour, t&p etc. required for proper completion of the work. supply & fixing of 16 gauge m.s.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required. supply fixing of electronic fan regulator (modular) 120-280 v. isi marked, on the existing switch board including making connetion, required material, labour t/p etc for proper completion of work to the satisfaction of engineer in charge of work supply and ceiling fan with fan motor of ac permanent insulation, capacitor rating conforming bee 5 star rating and is: 374/79 and also comply with is:1709/1984 with latest amendment. the rated voltage 220/240 volt 50hz, 1-ph ac the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system bee 5 star rated-1200 mm sweep supply and erection of ac 230/250 volts, 50 hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep. supply & fixing of led tube light with batten suitable for up to 1 x 22 watt led tube light complete including tube etc on surface complete in all respects. (cat: suuply and fixing of water tight oblong 10 watt led bulhead luminaire with driverr set confirming to ip 65 and above protection complete in all respect. (cat: s/f of single light wall bracket on matching m.d.f.e.g..board base etc. complete in all respects. supply & fixing of led tube light with batten suitable for up to 2 x 22 watt led tube light complete including tube etc on surface complete in all respects. (cat: supply and fixing of surface/flush mounting distribution boards with additional metal door withot mcb complete in all respects.6 way tpn supply and fixing of surface/flush mounting distribution boards with additional metal door withot mcb complete in all respects.8 way spn cat-a supply and fixing of 6amp to 32 amp(10 ka) mcb in existing mcb, db complete with connections as required. supply and fixing of power plug with 20a/250 v flush type modular switch and 5 pin 20 a/250v flush type universal modular socket switch on concealed m.s. box including supply of all material, labour t&p etc. required for proper completion of work. supply and fixing single pole mcbs blanking plate complete in all respects. supply and laying of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on m.s. clamps etc, of suitable size. 16 sqmm 4 core supply & fixing of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. the armouring of the cable shall be properly connected with the earth as per dire 16 sqmm 4 core supply and fixing of palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of engineer-incharge. 16 sq.mm supply and erection of ac 230/250 volts, 50 hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep. supply & fixing of fire extinguishers, abc type 4.00 kg capacity (isi marked is: 15683 & tac approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. supply & fixing of fire extinguishers, co2 type 4.50 kg capacity (isi marked is: 15683 & tac approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work pa providing and fixing of water cooler including all fittings etc. complete cost of submersible pump with boring