tender for renovation and up gradation of officers mess at khasa under shq bsf amritsar; 1 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. 2 providing and fixing teak wood lipping of size 25x3 mm in pelmet 3 providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10 mm 4 providing and fixing bright finished brass handles with screws etc.complete 125 mm 5 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm 6 providing and fixing aluminium pull bolt lock, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. 7 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm 8 providing & fixing fly proof wire gauze to windows, clerestory windows & doors with m.s. flat 15x3 mm and nuts & bolts complete.galvanised m.s. wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides 9 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in colours white, ivory, grey,fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 10 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.size of tile 600x600 mm 11 providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.size of tile 600x600 mm 12 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) 13 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work (two or more coats) over and including water thinnable priming coat with cement primer 14 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work 15 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 16 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour old work (one or more coats) 17 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 18 finishing walls with acrylic smooth exterior paint of required shade :old work (two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 19 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge.with cement mortar 1:4 (1 cement : 4 fine sand) 20 regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of engineer-in- charge. 21 raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. 22 flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :with f.p.s. brick tiles 23 dismantling w.c. pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of engineer-in-charge. 24 dismantling 15 to 40 mm dia g.i. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of engineer-in-charge.(a) internal work- exposed on wall 25 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar 26 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below 27 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 28 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china wash basin size 550x400 mm with a pair of 15 mm c.p. brass pillar taps 29 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. 30 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer - in - charge. 31 providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing p/s trap, complete in all respect as per directions of engineer-in-charge. 32 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge.internal work - exposed on wall 25 mm nominal dia pipes 33 providing and fixing uplasticised pvc connection pipe with brass unions :45 cm length 15 mm nominal bore 34 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge.(glazing, paneling and dash fasteners to be paid for separately) :for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron) 35 providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomandsideswithrequiredepdmrubber/ neoprene gasket etc. aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing i paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, paneling and dash fasteners to be paid for separately) :forshuttersof doors,windows&ventilatorsincluding providing and fxing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required (fittings shall be paid for separately)powder coated aluminium (minimum thickness of powder coating 50 micron) 36 providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.pre-laminated particle board with decorative lamination onboth sides 37 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item):with float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) 38 non scheduled itemsprepartion/cleaning of surface by using wire brush or air compressor machine then (i) applying ofapprox area 24-40 sqm 2 liters of zycoprime + diluted in 21 liters solution of 1:20 zycosil + soultion in water make zydex (having milky white or free flowing liquid, specific gravity 1.01 to 1.02, viscosity @ 25 deg, ph 6-7, dilutant (clean potable water tds <1000 ppm) on lateral and longitudinal direction and proper curing. (ii) apply first coat of elastomax (zydex) using flat brus/roller with dilution of 300 ml-350 ml per liter with water. leave the surface for at least 24 hours for drying. after this, second coat of elaastomax should be applied undiluted using flat brush/roller and left to dry completly. specification i.e. viscous liquid,white in colour, sp gr. 1.35, elongation >400% and application temperature 5° to 35° .complete in all respect as per the direction of engineer-in-charge. 39 providing and fixing angular stop cock with wall flange for wash basin mixer of approved quality jaquar or equivalent as per engineer in charge. 40 providing and fixing c.p. brass stop cock (concealed) of standard design and approved quality jaquar or equivalent as per engineer in charge. 41 providing and fixing cp single lever basin mixer of approved quality jaquar or equivalent as per engineer in charge. 42 providing and fixing c.p. brass long nose bib cock of approved quality jaquar or equivalent as per engineer in chargeand weighing not less than 810 gms. 15 mm nominal bore 43 providing and fixing bath tube mixer(exposed straight legs) with telephone shower arrangement & crutch(without hand shower and hoses) jaquar or equivalent company as per engineer in charge 44 providing and fixing health faucet with 1 meter long easy flex tube in chrome finish & wall hook of jaquar qualily and make or equivalent as per engineer in charge. 45 providing and fixing overhead shower 150mm x 150mm squarel shape single flow (abs body chrome plated with gray face plate) with rubit cleaning system of approved quality jaquarquality and make as per engineer in charge. 46 providing and fixing plastic soap corner container set of three pieces container of side length 150mm, 220mm & 300mm with 90 degree circular corner type. 47 providing and fixing towel rack 600mm long with lower hangers, stainless steel of jaquar or equivalent quality and make, including fittings, cutting and making good the walls wherever required as per engineer in charge. 48 providing and fixing towel ring round of jaquar or equivalent company as per engineer in charge. 49 finishing walls with textured design wall paint of required shade : new work (two or more coats applied @ 4.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 3.20kg/10 sqm 50 civilside estimated cost 51 wiring for circuit/ submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. (i) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 52 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm 53 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/recessed steel/ pvc conduit as required. 3 x 4 sq. mm 54 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. ( 20 mm) 55 supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etc. as required. 56 a) 5/6 amp. switch 57 b) 3 pin, 5/6 amp. socket outlet 58 c) telephone socket outlet 59 d) tv socket outlet 60 supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etc. as required. 61 a) 15/16 amp. switch 62 b) 6 pin, 15/16 amp. socket outlet 63 supply, installation, testing and commissioning of 24 watt led tube fittings prewired for led tube, complete with all accessories and led tube directly on ceiling/ wallincluding connection with 1.5 sq. mm frls pvc insulated copperconductor single core cable etc as required. 64 supply and fixing of 10 watt mirror led light surface/recessed mounted with integrated electronic driver in ceiling/surface complete with all accessories including connections etc. as required. 65 providing and fixing of 12 watt surface mounted led fitting square/round directly on ceiling/ wall, including connection with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable and earthing etc. as required. . 66 supplying and fixing 9 w led lamp decorative wall mounting, brushed nickel finish fixture with opal glass diffuserwith b22 base. 67 supplying,installation, testing and commissioning of heavy duty exhaust fan, metalic body 230v,300 mmsweep,single phase including making the hole to suit the size of the above fan, making good the damage i/c p/f louver and shutter complete with frame for exhaust fan of size connections,testing and commissioning etc as required. 68 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, onsurface/ recess, complete with tinned copper bus bar, neutral, bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator). 4 way (4 + 12), double door 69 supplying and fixing foloowing way , single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/recess, complete with tinned copper bus bar, earth bar ,din bar,interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) a) 12 way, double door 70 supplying and fixing 63 amp rating, four pole, 415v, isolator in the existing mcb db complete with connections, testing and commissioning etc as required. 71 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. (single pole ) 72 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. (double pole ) 73 providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc as required. 74 a) 250a, 36 ka, fpmccb 75 b) 400 a,50 ka,fpmccb 76 sitc of various sizes water protected outdoor (water proof)huttype compartmentalized type double door cubical panelboth side opening havingdepth up to 450 mmsuitable for 415 volt, 3 phases, 50 hz made out of 2mm thick crca sheet with required hardware duly painted with powder coated .panel having separate detachable gland plate, angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), hinged door, both side opening with locking arrangement, earth bar/stud, led pilot light for phase indicator (r,y,b) on top, 200a/415v 4 strip aluminum bus bar duly pvc sleeved, connection inter–connection with 25% extra current carrying capacity busbars to mccbs spreader links and with solid copper conductor cable 10 sqmm/ solid aluminium rodfor connection tomcbs and heavy duty connectors of required current carrying capacity to be fixed back side including incoming/outgoing cables connection for three and single phasemcbs where as required, testing on loadand marking of location for incoming and out going distribution i/c grouting the legs in existing floor with 1:3:6 cement concrete foundation and dsimantling the existing panel, incoming/outgoing cable connections etc complete as required i/c dismentling the existing feeder pillar and ug cable. (panel should beas per design &drawing approved by engg in charge).led light min 5 watt with on/off switch to be provided in the panel. 77 supplying and laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of alluminume armoured 3.5 x 35 sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. 78 supplying and laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of alluminume armoured 3.5 x 50 sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. 79 electrical side estimated cost