tender for provision of antistatic flooring and misc civil works in te (t-iii s/q) at gaon chakeri, kanpur.; 1 sub-head : earth work 2 clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. 3 sub-head : woodand p.v.c. work 4 deduct for not providing hinges in doors, windows or clerestory window shutters with : 5 isi marked stainless steel butt hinges with stainless steel screws : 6 for 2nd class teak wood and other class of wood shutters 7 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 8 30 mm thick including isi marked stainless steel butt hinges with necessary screws 9 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete. 10 fixed to steel windows by welding 11 sub-head : steel work 12 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 13 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as f7d,f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 14 fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 15 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 16 in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 17 sub-head : flooring 18 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 19 40 mm thick with 20 mm nominal size stone aggregate 20 providing and laying 2.00mm thick anti-static polyvinyle chloride sheet on a smooth and base using rubber based adhesive (viz dunlop 8758 equivalent) including cleaning levelling and drying of base including rolling with light wooden roller weighing about 5 kg, making copper strip grid of required size (for connecting to earthing) all compete as per specifications and as directed by the engineer - in - charge. 21 providing and fixing copper strips of size 25 mm wide and 0.30 mm thickness under anti-static pvc flooring including cost of making holes in the strips and riveted with necessary copper rivets etc. complete in all respect as per the direction of engineer-in- charge 22 thermowelding of pvc/ anti static flooring as per direction of engineer-in-charge. 23 sub-head : finishing 24 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 25 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 26 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. 27 old work (one or more coats) 28 finishing walls with acrylic smooth exterior paint of required shade : 29 old work (two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). 30 sub-head : repairs to buildings 31 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-harge. 32 with cement mortar 1:4 (1 cement : 4 fine sand). 33 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 34 float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 35 raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground, all complete as per directions of engineer-in-charge. 36 flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : 37 with f.p.s. brick tiles 38 providing services of fabricator oriented work for repairing of steel windows for smooth functioning including replacement of its fittings if any, ( fittings shall be paid seperately) as per direction of engineer-in-charge. 39 providing & fixing 2mm thick polycorbonates sheet for window chhajjas of required make and colour as per direction of engineer-in-charge. 40 supply of a labour for miscellaneous civil/ horticulture maintenance works in t e and staff quarters compound as and when required by e-in-c, such as uprooting vegitation, leveling the earth, cleaning the roots, khurras, gully trap, trimming of hedges, trimming tree branches, removal of bush, unwanted sapling like peepal, bargad etc on walls, pipes, terraces, minor urgent civil works, i.e. diposal of rubbish to the dumping sites at ground floor whenever required all complete as per direction of engineer-in- charge (the item included all labour, t&p required) 41 repairing of shabby rcc roof ceiling, chajjas and similar after removing scaled and damaged cement concrete/mortar by chipping with chisel and wire brush and finishing with cement mortar 20 mm to 40 mm thickness of mix 1:3 ( 1 cement :3 coarse sand) as directed by engineer-in-charge. 42 sub-head : dismantling and demolishing 43 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. 44 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.. 45 in cement mortar 46 dismantling of flushing cistern of all types (c.i./pvc/vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 47 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 48 sub-head : sanitary installations 49 providing and fixing wash basin with c.i. brackets, 15 mm ptmt pillar cock, 32 mm ptmt waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. white vitreous china flat back wash basin size 550x400 mm with single 15 mm ptmt pillar cock. 50 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete. 51 10 litre capacity - white 52 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. 53 semi rigid pipe 54 32 mm dia 55 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 56 rectangular shape 453x357 mm 57 providing and fixing unplasticised -pvc pipe clips of approved design to unplasticised - pvc rain water pipes by means of 50x50x50mm hardwood plugs, screwed with m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 58 110mm 59 providing and fixing on wall face unplasticised rigid pvc (swr grade) soil, waste, vent pipes conforming to is : 13592 type a, including jointing with seal ring is : 5382, leaving 10 mm gap for thermal expansion,conforming to is : 13592: single socketed pipes. 60 110 mm diameter 61 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc swr grade soil, waste, vent pipes conforming type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.to is : 13592 62 bend 87.5° with door 63 110 mm 64 single y with door 65 110mm x 110mm x 110mm 66 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc swr grade soil, waste, vent conforming type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.to is : 13592 67 collar 68 110 mm dia 69 sub-head : water supply 70 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. :concealed work, including cutting chases and making good the walls etc. 71 15 mm nominal outer dia .pipes. 72 20 mm nominal outer dia .pipes. 73 25 mm nominal outer dia .pipes. 74 providing and fixing uplasticised pvc connection pipe with brass unions : 75 45 cm length 76 15 mm nominal bore 77 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 78 providing and fixing ptmt bib cock of approved quality and colour. 79 15mm nominal bore, 86 mm long. weighing not less than 88 gms. 80 providing and fixing cpvc unions for cpvc pipe line including cutting and fixing. 81 15 mm nominal bore 82 20 mm nominal bore 83 for 25mm dia pipe line