tender for arc of supply and fixing new led street lights ,abc cable wire and poles in different wards of municiple corporation kota south - supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discomspecifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr lt cross arm 600 mm long with clamp 3 lt cross arm 1200 mm long with clamp 4 supply and fixing of lt porcelain pin insulator as per is 1445-1997 andasperdiscomsstandardspecifications,suitableforworking voltage1100voltsincludingallaccessorieslikemsforgedgilt pin confirming to is:7935/1975 (latest amended) nut, boltetc.as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr 100 mm x 70 mm 5 supply andfixing ofltporcelainshackleinsulatorasperis:1443 1979andasperdiscomsstandardspecifications,suitablefor working voltage 1100 volts including all accessories like gi hardware fittings confirming to is:7935/1975 (latest amended) nut, boltetc.asrequired.allasperpreapprovedbyengineerin- charge.foradditionaltechnicalparametersofproduct/workrefer annexure a attached with this bsr 75mm x 90mm 6 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un- arrmouredaluminiumcable confirming to is:1554 p-i / is :7098 p - iof1.1kvwithh4-gradeelectrolyticaluminiumconductor confirmingtois8130ofpurity>99.6%,inner/outersheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/openduct/cabletrench/cabletray (withcabletie)including testing etc. as required of following size. oem must have its own in housenablaccrediatedlaboratoryfortestingprocedureasper is:10810. for additional technical parameters of product / work refer annexure a attached with this bsr 6.0 sq. mm 4 core 7 10.0 sq. mm 4 core 8 16.0 sq. mm 4 core 9 50.0 sq. mm 3.5 core 10 70.0 sq. mm 3.5 core 11 providing and fixing of ip 65 protected polycarbonate / polysterene fuseboxmouldedwithinsideknockoutsoffollowingsizewith hinged cover, transparent window,pu gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, the box shall be provided with din rail, 4 / 8 way 10.0 / 16.0 sq.mm heavy duty connector, earth terminal, complete in all respect.allasperpreapprovedbyengineerin-charge. for additional technical parameters of products/ work, refer annexure a attached with this bsr . 125 mm x 200 mm x 122 mm 12 supply & laying following size b class ,g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with accessories like bend, socket etc.for laying earth conductor/ strip / cable in ground/ surface/ recess as required. all as per preapproved by engineerin-charge. (earth excavation willbepaidextra)allasperpreapprovedbyengineerin-charge. for additional technical parameters of products/ work, refer annex ure a attached with this bsr.50 mm dia. 13 65 mm dia. 14 supplyinganddrawingfrpvcinsulated&unsheathedflexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.90 %purity copper, class5 strandingin acc. to is:8130/iec 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rating as per is:3961 part 5,in existing surfaceorrecessedpvc/msconduit/casingcapping makingconnectionswithcopperlugsofsuitablesize, ferrules,testing etc. as required. oem must have its own in house nabllabsetupforalltestingfacilitiesforwires. foradditional technical parameters of product /workrefer annexure a attached with this bsr 1 x 1.5 sq.mm 15 1 x 2.5 sq.mm 16 providing & fixing of iso certified company made bolted type/ din typehbc(highbreakingcapacity)fuselinksof80kabreaking capacity,as perpwd specification for electrical works conforming tois:13703intheexistingfusebase,fuseswitchunitetc.ofthe following type and rating.appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in- charge. for additional technical parameters of products/ work, refer annexure a attached with this bsr.din (knife type) type 63 a to 160 a size 00 17 providing & fixing of 240/415 v ac mcb with positive isolation of 10 kabreakingcapacity (b/c/dtrippingcharacteristicaspertypeof loadandsiterequirement)4kvimpulsewithstandvoltage,isi markedis8828(1996)/conformingtoiec60898-12002,iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class3asperiec, minimum phaseterminationcapacityof 35sq.mm. , conductor line load reversibility , ip 20 contact protection andfittedin existingdistributionboard/sheets,minimumelectrical operation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80 a&aboveratingincludingmakingconnections,testingetc.as required. oem shall have submitnabl / cpri / erda accrediated labtypetestreports&allasperpreapprovedbyengineerin- charge. foradditional technical parameters of product /workrefer annexure a attached with this bsr four pole mcb (with b/c curve tripping characteristics) 6 a to 32 a rating 18 50/63 a rating 19 providing&fixingof240/415visolatorisimarkedis:13947- iii/conforming to iec 60947-3, suitable for ac22a utilization category,4kvimpulsewithstandvoltage, truecontactindication, redcolourdolly/levershallhavesinglemouldcoveringoverall poles for operation , two position din rail mounting,minimum phase termination capacity of 35sq.mm.ip 20 contact protection and fitted in existing distribution board / sheet including making connections, testingetc.asrequired.oemshallhavesubmitnabl/cpri/ erda accrediatedlab type test reports& all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr four pole isolator 80 a/ 100 a rating 20 supplyingandfixingofaluminium(iec60105iso209-1,2)/ copper (iec 60028) bus bar by means of smc / dmc type insulator with standardshortcircuitwithstand capacity,hightensilenuts and bolts spring washers in existing panel including bending , cutting inrequired shapeandsizeandcolourcodingwithheat shrinkable pvcsleeves.allasperpreapprovedbyengineerin-charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr. electrolytic grade aluminium bus bar 6010 grade 21 providing & fixing of mechanical / digital time switch having followingday/weekprogrammeandminimum100hoursreserve andac1ratingof16-20amperesincludingmakingconnection, programmingconformingtoiec60730-1and60730-2-7etc.as required. allasperpreapprovedbyengineerin-charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr .one day reserve (analog type ) 22 one day & week reserve (digital type ) 23 sitcof3/4 polecurrentlimitingmouldedcasecircuitbreaker (mccb) madeof flame retardent & heat resistantmaterial having following current rating, short circuit breaking capacity at 440/415 v,50hz;o/l&s/csettings,conformingtois/iec60947p-2 :2003 with frontface and centralised adjustable, trip free mechanisum,truecontactpositionindicator, lineload interchangeability, designed for both horizontal & vertical mounting withoutanyadverseeffectonelectricalperformance,suitablefor operationupto55degreeandwithoutderatingupto40degree, pollution degree 3,having positive isolation capability, push(test) totrip,triptimelessthen10msunders/ccondition,breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage690 v.provision for uvr , shunt trip , earth fault trip, door interlock, pad lock &rotaryhandle, includingmakingconnections etc.as required.oem shall have submitnabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in-charge. for additional technical parameters of product / work refer annexure a attached with this bsr 3 pole mccb with thermal magnetic release up to 100 amp , 25 ka, adjustable o/l & adjustable s/c setting, 24 125 amp , 25 ka, adjustable o/l & adjustable s/c setting, 25 p & f in position frame made out of m.s. angle (riveted or welded) finishedwithtwocoatsofredoxideandtwocoatsenamelpaint includingcutting,welding,holesetc.offollowingsizesas required.for additional technical parameters of product / work refer annexure a attached with this bsr 35mm x 35mm x 5mm 26 40mm x 40mm x 5mm 27 providing & fixing of is: 13875 & iec :61326 confirming led digital type(up to 500) v range volt meter / direct- ammeter /ct oertated ammeter/frequencymeter/kwhmeter/multifunctionmeter/ power analyzer of class 1 accuracyas per is : 1248 of size 96mm x 96mmincludingmakingconnectionbypvc insulatedcopper conductor with pvc sleeves / channel etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , referannexure a attached with this bsr. single phase ammeter 28 single phase voltmeter 29 providing & fixing of110/220 v, unibody led indicatinglamp iec 60947 withintegralcircuit,ip65abovepanel& ip20terminal block, approx. body dia for panel not less then 20 mm, length min. 50mm, front led cover dia min.29 mm, contact material phospher bronze for led, pcb contacts shall be ofbrass (tin plated), impulse dielectric tested for 2.5 kv, rated insulation resistance shall be 100 m ohm at 500vdcincluding connection etc. as required.all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , referannexure a attached with this bsr. red/yellow/green colour 30 blue / white colour 31 p&fixingpowdercoatedcrcasheetenclosuresonexisting angle iron frame by means of nuts and bolts and makingholes , din rail etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr 1.6 mm thick 32 supply&drawingwiringforsubmainsisimarked(is:694)1100 voltsgradepvcinsulatedflat twincoresheathed solidaluminium conductorwith10swgg.i.supportwiredulyclippedetc.as required. for additional technical parameters of product / work refer annexure a attached with this bsr 4.0 sq.mm 33 6.0 sq.mm 34 10.0 sq.mm 35 supply and erection of mild steel swaged tubular pole conforming tois:2713-1980(partitoii)with baseplate,thepoleshallbe made from steel tube & pipe (is:1141, fe 410) including excavation of the pit and filling the same with c.c. of m-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mmouterdiaaroundthepole.dulyfinishedwithcement plaster, earthing terminals, cable entry with 32 mm dia. b class gi cable sleeves. after eraction pole shall be painted with two coat of red oxide primer and two quote of enamel paint of silver colour as perthedirectionofengineerinchargecompleteasrequiredof following height & designation.( see table p - 02 forspecs. ) all as perpreapprovedbyengineerin-charge. foradditionaltechnical parameters of products/ work , referannexure a attached with this bsr . 7.5 mtr. ( 410 sp - 5 ) 36 9.0 mtr. ( 410 sp - 28 ) 37 providing and fixing of fuse box size 250(h) x 200(w) x 150(d) mm fabricatedof 1.6mmms sheetwithhinged cover,dust and vermin proof,rubbergasket,lockingarrangement,duly holdedwith2nos pole clamps of 20 mm x 3 mm flat with nut and bolts, complete with anticorrosive treatment, finishedwith two coatof approved enamel paint. the box shall be provided with 2 / 4 nos copper bus bar 125 x 20 x 3 mm with brass screws suitable supports,earth terminal, inter connection,knockoutsfor20/25mmcablegland,1no.6amp mcb complete in all respect. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr. 38 plateearthing asperis:3043withhotdippedg.i.earthplateof size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 20mm dia. g.i. b class watering pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof poly-propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225to 260 mm, bottomdia 300 to350 mm. and height 250to300mm.andembodyingthepipe completewith alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in-chargeduringsitevisitandensuretoenterinmeasurment book.all as per pre approved by engineer in-charge. for additional technicalparametersofproducts/work,referannexurea attached with this bsr. 39 supply & laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, makingconnectionwithgi/cupuritypurity>95% thimbleetc.as required.allasperpreapprovedbyengineerin-charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr. 8 swg g.i. ( hot dipped) wire 40 supplying and makingend termination with heavy aluminiumlugs ( pin / ring type ) confirming to is 8309-1993 & is 8337-1976 duly crimped with crimping tool, pvc tape etc of following size.all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , referannexure a attached with this bsr . 25.0 sq.mm 41 50.0 sq.mm 42 p / l of double wall corrugated hdpe pipe confirming to is : 16205 p-24,stiffnessclass750n,externallycorrugatedandhaving smooth surface insidewith hdpe coupler, elbow, teeat required depth below the ground for laying cable of followingnominal outer dia.mfr test reportfrom nabl accrediated is to be submitted.(excavation of earth & back filling with compaction is to bepaidextra)allasperpreapprovedbyengineerin-charge.for additional technical parameters of products/ work, referannexure a attached with this bsr.63mm 43 90 mm 44 providing & fixing ofac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilarycontacts,dinrailmountingtypeincludingmaking connections,testingetc.asrequired. allasperpreapprovedby engineer in-charge. for additional technical parameters of products/ work, refer annexure a attached with this bsr. 3 pole power contactorswith following ac 3 rating 40 amp 45 70 amp 46 95 amp 47 p&fpaperphenolicresinbonded laminatesconfirmingtois: 2036 - 1995 for boxes/ frames including making holes for switches etc,withbrassscrews,washers/zincplatednutandboltsas required. for additional technical parameters of product / work refer annexure a attached with this bsr 6.4 mm thick 48 providing&fixingofbisapproved currenttransformer asper pwd specification for electrical works ,isi marked as per is 2705- 1992/conformingtoiec60044-1,withsecondaryterminal ofct shallbebroughtoutsuitabletoaterminalblockwhichshallbe easieraccessiblefortestingandterminalconnection,withall necessarysupportinexistingpanelincludingconnectionetc.as required currenttransformerringtypetapewound/resincast wound as per is 16227 with, accuracy cl, ct ratio and burden as specified.isf<=5,cucrosssectionofsecondarywire1.5sqmm (minimum), including all necessary support in existing panel includingconnectionetc.asrequired.allasperpreapprovedby engineer in-charge.all as per pre approved by engineerin-charge. for additionaltechnical parameters of products/work ,refer annexure a attached with this bsr .resin cast wound type ct c t class 1, ratio upto 150/5, burden 5 va 49 c t class 1, ratio 200/5 to 300/5, burden 10 va 50 add extra in item no.60.5 if excavation done in hard rock / cc road / tar road and making good the same 51 providing&fixingof ik08ip-66protectedhighpowerledflood light system with single piece pressure diecast aluminium housing, toughenedglassdiffuserwithsuitablelensesonledtoachieve variousbeamangles,ofhighpowerledof3to5watteach. integrated potted driver as a unique bis r numberhaving efficiency more than 85 % and in compliance to bis certified and trade mark certificate. the system level luminaire efficacy >=125 lm/ wt. led driver inputvoltage ac 120 to 270v acwith highvoltage cutoff @>=300vacandautoresettingsafety.powerfactor>0.95, thd(i) <10% , driver current <=750ma. driver should be phase to phaseprotectionof440vfor4hrs.electricalconnector,surge protectionmin>=4kv internal and10kvexternal butinside driver compartment, system life of 50000 burning hours with 70% of initial lumensmaintained,cri>70andcct5700k ±355k. manufactures word mark/name engraved/ embossing/ screen printing on die cast housing to allow traceability/ authenticity. fixture shallbeis10322complianced.oemmusthaveitsowninhouse nabl lab setup for all testing facilities forled fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessoriesfromoemshallbesubmitted.allasperpre approvedbyengineerin-charge. foradditionaltechnical parameters of products/ work , referannexure a attached with this bsr.high power led flood light minimum lumen output 8700 lm 52 high power led flood light minimum lumen output 14800 lm 53 providing&fixingofik08,ip66protectedledstreetlight luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipationfinsonhousingwithuvstabilizedpc(uvstablization reportsubmittedforuvcover)/toughenedglasscoverand secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver& has a unique bis r number with input voltage ac 120 to 270 v ac with highvoltagecutoff@>=300vacandautoresettingsafety, power factor >0.95 driverefficiency >85%,thd(i) <10%humidity 10% to 90% rh working temp -5c to 45c .driver current <750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal ormorethan50000burninghrswithminimum 70%lumenmaintened,cri>70andcct5700k+355k.surge protection shall be min ≥ 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs.manufactures word mark/name engraved/embossingondiecasthousingtoallow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for alltestingfacilitiesforledfixtures. (lm79/lm80)certificate/ report with liable warranty of product/accessories from oem shall beled street light fixture with minimum lumen output 3700 lm submitted.allasperpreapprovedbyengineerin-charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr. 54 led street light fixture with minimum lumen output 5600 lm 55 led street light fixture with minimum lumen output 8700 lm 56 led street light fixture with minimum lumen output 12500 lm 57 led street light fixture with minimum lumen output 15000 lm 58 providing&fixingofstreetlightbracketmadeoutfromfollowing size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. asrequired.allasperpreapprovedbyengineerin-charge. for additional technical parameters of products/ work, referannexure a attached with this bsr.25 mm dia. 59 32 mm dia. 60 supplying and drawing of xlpe insulated lt aerial bunchedaluminium conductor cable confirming to is 14255/1995 and is 398(pt-4)/ 1994 and as per discom specs. on existing cross armsthrough i hook with all necessary t&p required including binding andtwisting etc. complete in all respect as required. all as per preapproved by engineer in-charge. for additional technicalparameters of products/ work , refer annexure a attached withthis bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated) 61 3 x 25 sq. mm. + 1x25 sq. mm. (insulated) 62 supply & fabrication steel structure with ms channel / angle / joist /ismb / sheet etc. including welding, rivetting, cutting, nut & bolt , onecoat of primer & two coat of enamel paint etc. as required completein all respect. all as per pre approved by engineer in-charge. foradditional technical parameters of products/ work , refer annexurea attached with this bsr . 63 supply and erection of p.c.c. pole as per rec manual no 15/1979 (ammended upto date) and as per latest discom specifications with factorofsafety2.5 includingexcavationofpituptopoleplanting depth1/6thofpolelength.andbackfillingwithstone aggregate/boulders and soil by ramming and watering etc complete asrequired.allasperpreapprovedbyengineerin-charge.for additional technical parameters of product / work refer annexure a attached with this bsr 8.0 mtr long pcc pole of 200 kg working load 64 9.0 mtr long pcc pole of 200 kg working load 65 supplyanderectionofgistaysetconfirmingtopattern-1of bs:16/1974 and as perlatest discomspecificationscomplete with stay rod with anchor plate fitted with cast iron cross head and steel bow,incementconcrete1:3:6includingexcavationofpit-re-filling etccompleteasreqd.allasperpreapprovedbyengineerin- charge.foradditionaltechnicalparametersofproduct/workrefer annexure a attached with this bsr stay setof dia20mm, 2.4mlong stay rod and anchor plate 380 x 380 x 4.0 mm