providing internal facilities in ward no 05,12,17,13,15,20,01 at muncipal corporation area=toilet block descriptio item no. 1 excavation for foundation in earth, soil of all types, sand, grave and soft murum, including removing the excavated material up t a distance of 50 m. beyond the building area and stacking anc spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) b mechanical means basic rate = rs. 207/- 207+10.35-217.35 pwd ssr 2022-23 item no 21.02 page no 153+5% c.a. item no. 2 excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering ncluding shoring and strutting etc. complete. (lift from 1.5m to 3.0m) by mechanical means 1.50m to 3.0m basic rate = rs. 258/- 58+12.9-270.9 wd ssr 22-23, item no.21.04 page no 153 + 5% с.а. tem no. 3 excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material apto a distance of 50 metres beyond the building area and tacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming, watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means 1.50 m to 3.0 m basic rate = rs. 524/- item no. 4 excavation for foundation in hard rock by chiselling, wedging, lin drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling wit available earth/ murum watering, ramming etc. complete. (lif upto 1.5 m). by mechanical means 1.50 m to 3.0 m basic rate rs. 1437.7/- 1437.7+71.885-1509.59 pwd ssr 22-23, item no.21.20 page no 155 + 5% с.а. item no. 5 providing dry trap/granite/quartzite / gneiss, rubble stone soling in 15 cm to 20 cm layers including hand packing and compacting royalty charges etc. complete. as per rate analysis no 2 item no. 6 providing and laying ready mix cement concrete in m20 of trap/granite/quartzite/ gneiss metal for steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (wooden centering will not be allowed.), with fully automatic microprocessor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (panmixer) etc.complete.with fine aggregate (natural sand /crushed sand vsi grade finely washed etc) pcc m-20 as per rate analysis no 2 item no. 7 filling in plinth and floors with approved excavated material in 15cm. to 20cm.layers including watering and compacting etc. complete basic rate = rs. 120/- 120+6=126 pwd ssr 2022-23 ι.ν. 21.36,ρ.ν.157+5% с.а. item no. 8 providing and laying ready mix cement concrete m-30 of trap/granite/quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, steel centering, formwork,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) footing m-30 as per rate analysis no 8 item no. 9 providing and laying cast in situ/ready mix cement concrete m-30 of trap/granite/quartzite/gneiss metal for r.c.c. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) column m-30 as per rate analysis item no. 10 providing and laying cast in situ/ready mix cement concrete in m-30 of trap/ granite/quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) beam m-30 as per rate analysis etc