procurement of cesspool procurement of cesspool tanker (suction cum jetting machine) 6000l-bs vi with chassis to attur municipality. , supply and delivery of cesspool tanker (suction cum jetting machine) 6000l-bs vi with chassis with following sepcifications:- , features:- vacumm pump: type – rotary sliding vane, cooling – air cooled, drive - chassis side pto, tank: tank rear door opening - manual, tank tipping / angle - not applicable, moc - is:2062 gr.b, 4-6mm thickness, thickness of tank plate of ss 304 withproper reinforcement to withstand the required forces - 6mm, construction - cylindrical, shell with torispherical dished ends. suction hose: dia./length / qty / 4”/3 mtr. / 6 nos, sludge suction & drain valve: size 4”, hyd. pump: type - yes-reputed make, drive - yes, reputed make. , capacity:- tank: valume – water storage tank – 1000 liter, sludge storage tank – 5000 liter, vacuum pump: make jurop / moro / gardener denver mistral / battioni, flow / vacuum: 500 – 550 cum./hr./90%, jetting pump: working pressure - 150-160 bar, hose length - 100-150m, size - 1”dia, water flow for pump of jetting machine – 100 – 150 lpm, minimum burst pressure of jetting hose – 500-520 bar, maximum working pressure of jetting hose - 200-220 bar. , safety:- water level indicate: type / qty. – tube type / 02 nos., pressure relief valve – size / qty. – 2”/1 nos., vacuum relief valve – size / qty. 1.5”/1 nos. , mounting:- chassis:gross vehicle weight (gvw) – 12 ton, emission norms – as per local rto, chassis engine output – min. 90 hp, driver’s cabin type – single (day) cabin, make – ashok leyland / tata / eicher / equivalent with pto with emission of norms bsvi, make / model / wb / hp / side pto provision – any other equivalent model of other chassis manufacturers, scope - customer, side pto provision – provision required. , dimensions:- equipment: equipment length – 4500 – 5150mm approx. equipment height – 1500-2200 mm approx. overall width – 2000 – 2250mm approx. overall height – 3000 – 3500mm approx., equipment rear overhang – 600 – 1600mm approx. , painting:- surface preparation and finish: equipments exterior – spray-painted with two coats of superior quality anti-corrosive primer and two coats of enamel metal paint.colour code will be as per tender requirements.tank’s interior – coated with 2 coats of superior quality anti-corrosive grey epoxy paint.