repair and renovation of panchayat ghar bathindi pyt sunjwan lower block satwari scheme rgsa plan year 2021-22- 1 labour engaged for shifting of furniture / goods before start of work and reshifting the furniture after completion of work and dismantling of old flooring for fixing of tiles and scraping the old white wash and old paint on door / windows. 2 earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( not exceeding 1.5 m in width ) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: ( all kinds of soil ) . 3 providing and laying in position of cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregates 40mm nominal size ) including all leads, lift and carriage complete. 4 providing and laying in position of cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregates 40mm nominal size ) including all leads, lift and carriage complete. 5 providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. all works upto plinth leve. 1:1½:3 ( 1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size ) . 6 reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 ( 1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size ) . 7 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade fe-500d or more. 8 brick work with common burnt clay ( non-modular ) bricks of class designation 7.5 infoundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand ) . 9 extra for brick work with common burnt clay bricks / cement concrete bricks insuperstructure above plinth level upto floor five level. 10 half brick masonry with common burnt clay ( non-modular ) bricks of class designation7.5 in foundations and plinth including curing in : cement mortar 1:4 ( 1 cement : 4 coarse sand ) . 11 extra for half brick masonry in superstructure above plinth level upto floor v level. 12 centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete. 13 12mm thick cement plaster of 1 cement: 4 fine sand mix. 14 repair to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under including cutting the patches in proper shapes and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with 1 cement: 4 sand. 15 providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. 16 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. new work ( two or more coats ) over and including priming coat with cement primer. 17 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 18 add provision for electrical installations and repairs viz. fans, bulbs, led lights, conduits, exhaust fans, repair to switch boards and modules, all other misc. items, taking out existing open battens and cutting masonry to a depth of avg. 50 mm for concealed conduits and making good the walls again incl. cost of cutting, re-plastering all complete and all form of taxes and carriages complete incl. charges of electrician. ( all complete job as per direction of site emgineer incharge. ) 19 providing and laying 60mm thick factory made cement concrete interlocking paver block of m-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of engineer-in-charge. 20 steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. ( hot finished welded type tubes ) . 21 add c / o of sign board. with complete job as per site incharge direction.