tender for civil works - 2 excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. ( pwd 4.01 ) 3 concrete with 4cm gauge stone ballast, coarse sand ( f.m. 1.5 to 2.0 ) and cement in proportion of 8:4:1.in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. ( csi no. 5.04a ) 4 precast cement concrete door sills, chaukhats boundary posts, shelves and similar small work with cement approved coarse sand ( f.m. 1.8 to 2.5 ) and 2 cm gauge graded approved hard stone ballast in the proportion 1:2;4, excluding reinforcement but including fixig the same in position including cost of all other material, labor and t&p. ( csi no. 5.09 ) 5 1st class brick work in 1:4 cement and coarse sand of 2.25 f.m. mortar in foundation and plinth including supply of all material, labour and t&p etc. requiredfor proper completion of work. ( pwd 6.03. ) 6 brick work in foundation & plinth with old dismantled bricks ( supplied by department free of cost ) and coarse sand of f.m. 1.5 to 2.0 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks, t&p etc complete. ( csi no. 6.18 ) 7 same as in item 6.18 above but in super structure for 230 mm thick wall. ( csi no. 6.19 ) 8 mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. ( csi no. 9.01 ) 9 as in item 9.01 above but when steel is to be provided by the department. ( csi no. 9.02 ) 10 tmt / tor steel in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. ( steel shall be arranged by the contractor ) ( csi no. 9.03 ) 11 12 mm cement plaster in single coat fair sideor half brick wal for interior plasting upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. ( pwd 13.01 / 1758iii ) 12 applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i / c including cost of all material, labour, t & p etc required for proper completion of work. ( csi no. 13.20 ) 13 disposal of rubbish / debris out side the uppcl area as per direction of er in charge including cartage, labour and material, t&p etc. required for proper completion of the work ( no. deduction for void shall be made ) ( csi no 20.16 ) 14 painting two coat with apex or equivalent brand weather coat paint on new wall surfaces ( well prepared with birla putty and one coat of primer ici or equivalent which shall be paid separately ) including thorough washing with water including cost of all materials, labour, t&p required for proper completion of work. ( csi no. 13.22+13.23 ) 15 painting or varnishing on previously painted old wood or iron work with two coats of approved superior quality ready mix paint luxol or equivalent brand or clear synthetic varnish including its sand papering, rubbing and cleaning as required including supply of all materials, labour and t & p etc. required for proper completion of the work ( c.s.i. no. 13.03+13.02 ) 16 dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the engineer-in-charge within a distance of 60 metres. ( pwd no. 17.02 ) 17 dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the engineer-incharge within a distance of 60 metres. ( pwd 17.04 ) 18 dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the engineer in-charge within a distance of 60 metres. ( pwd 17.07 ) 19 scrapping old white or colour wash or distemper including disposal of refuse as directed by the engineer-i / c within a distance of 60 m. ( pwd. 17.18 ) 20 laying cement concrete road slab consisting of 1 part cement 1 / 5 part approved coarse sand and 3 part approved 20mm down graded stone aggregate over prepared sub grade after its rectification and bringing it to proper camber and shape and making good to the satisfaction of e / i inclduing cost of all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 18.13 ) 21 filling of 20 mm. wide 100 / 150 mm. deep joint with coarse sand and saw dust mixed with hot bitumen etc. complete including supply of all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 18.14 ) 22 repair to plaster or pointing in patches in 1:4 including removal of old plaster racking out joints to 1 cm. ( 3 / 8 ) depth, watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and t&p etc. required for proper completion of the work . ( csi no. 11.07+20.02 ) 23 providing and fixing double scaffolding system ( cup lock type ) on the exterior side, upto seven story hight made with 40 mm dia. m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer-in- charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding. ( nsi ) 24 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer-in-charge ) 0.50 mm ( + 0.05 % ) , total coated thickness with zinc coating 120 gm per sqm as per is:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ( dsr 12.5 ) 25 supply and fixing of led street light fitting having dia cast aluminum body and diffuser with driver set suitable for 110 to 130 watt. confirming to ip 66 production complete in all respect. ( pwd 1424 ) for providing vehicle shed in kesa.