tender for watluge your resurrection cemetery dam work tal daund- 1 excavation for foundation in earth,soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m.beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means 2 excavation for foundation in hard murum including removing the excavated material upto distance of 50metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and struttin getc. complete.(liftupto 1.50m)bymechanical means 3 filling in plinth and floors with approved excavated material in15cm.to20cm.layers including watering and compacting etc. complete. 4 filling in plinth and floors with contractors material/brought from outside and approved byengineer inchargein layers of 15 cmto 20 cm including watering andcompactionetc. complete. 5 providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete. 6 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade)(non scada item) 7 providing and laying in situ /ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) (non scada item) 8 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade)(concrete non scada) 9 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite/quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade)(non scada item) 10 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade)(non scada item) 11 providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 12 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete 13 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete 14 providingand applyingtwocoatsof exterioracraylicemulsion paintconfirming tocorrespondingi.s.ofapprovedmanufactureandofapprovedcolourtotheplastered surfacesincluding cleaning ,preparing the plaster surface, applying primer coat,scaffoldingif necessary , and watering the surface for two days etc complete. 15 providing and fixing road junction / information sign board of size 0.90 m x 0.60 m.prepared on 16 gauge m.s. sheet with angle iron frame of size 35x35x5 mm includingpainting with one coat of zinc cromate stoving primer and two coats each of green/ whiteback ground and back side gray stove enamelled, bonded with red retro reflective sheetengineering grade, border / letters / numeral / arrows, coated with non pealable crystalclear protective coat retaining 100% reflection including two angle iron post of size50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white andblack bands of 30 cm. with 4 nos. high strength g.i. bolts and nuts of size 10 mm dia. and20 mm long sheet and angle iron post in one piece without joints including all taxes,conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cmsize as directed by engineer-in-charge etc. complete. mild steel board with engineeringgrade. 16 concrete. 1)compressive strength of c.c. cube (set of 3 cubes). 17 mortor. 1)compressive strength.( set of 3 cubes) 18 steel bar testing.1)upto 16 mm (set of 3 bars) 19 royalty for natural sand - screened (for plaster work only) 20 royalty for rubble stone excluding royalty 21 royalty for soft murum