tender for cc and drain work from r.k. choudhary, kamalkant to krishnakumar in ward-11, krishnakunj i. - dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the engineer-in- charge within a distance of 60 metre (200 feet). pwd sor 2022 17.3 2 taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre leadas per direction of engineer-in-charge. 3 s/l p:c:c (1:6:12) with 40 mm gauge brick ballast ,fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in - charge.{ as per pwd sor 2022 page no 18 si no 5.01 item no 273 } 4 m-150 class b/w in 1:4 cement csand mortor in including supply of all meterial labour t&p etc required for proper completion of work 5 12 mm thick plaster in 1:4 cement & coarse sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , labour t&p etc s.i.no. 584(i) 6 s/l c:c (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (as per pwd sor 2022 279 ( a). 7 s?l of stone ballast 22.40 to 53mm size with stacking for 10 measurment etc all complete 8 consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2/3 as per technical specification clause 405. as per pwd sor 2022 20.2.1 9 consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2/3 as per technical specification clause 405. as per pwd sor 2022 20.2.1 10 construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m 30(grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with power trowel cum floter-trimix flooring machine.technicalspecification clause1501. 11 r.c.c work with cement ,approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of doors &windows excluding supply of reinforcement and its bending ,but including its fixing and binding wire including necessary cantering and shuttering etc .and supply of all materials,labour,tools& plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra etc all complete as per direction of engineer in charge.(as per pwd sor 2020/283 a .) 12 steel reinforcement for r.c.c work including straightening ,cutting ,bending,placing in position and binding all complete upto plinth level mild steel and medium tensile steel bars dsr 2023 item n.5.22.1 13 providing and fixing factory made precast rcc perforated drain covers, having concrete of strength not less than m-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional t.m.t. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with m.s. flats of size 50 mm x 1.6 mm complete, all as per direction of engineerin- charge. 14 deduct of old brick 15 disposal of malwa with 8km distance 16 gst