tender for renewal of road in dhukwan colony campus jhansi - providing, laying, spreading and compacting stone aggregates of 22.4-53mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregates, watering and compacting to the required density grading-iii as per technical specification clause 405. 2 providing and applying tack coat with bitumen vg-10 using distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503. 3 providing laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade butumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and graded to be followed by seal coat of type c as per technical specification clause 508. 4 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c as per technical specification clause 510. 5 providing laying a hot applied thermoplastic compound with 2.5 mm thick i/c reflecoring glass beads @ 250 gms per sqm area thickness of 2.5 mm exclusive of surface applied glass beads as per irc-35-2015 the finished surface to be level,uniform & free from streaks & holes. 6 taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge. 7 laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge. (old cc paver blocks shall be supplied by the department free of cost).