misc br repair to bldgs and services at para dog unit cib pinaka regt offrs mess and other nearby location under age br i of ge sukna; 1.00 m & l for providing reinforced cement concrete (1:2:4) type b-1 nominal mix using 20 mm graded stone aggregate as in slab supported on walls ,beams and coloumns in floors,roofs,landings, kitchen slabs etc complete all as specified and directed. (note :- reinforcement shall be measured and paid separately.) 2.00 m & l for providing reinforced cement concrete (1:2:4) type b-1 nominal mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span and like complete all as specified and directed. (note :- reinforcement shall be measured and paid separately.) 3.00 supply only liquid water proofing compound complete all as specified. 4.00 m&l for repair to broken/damaged rcc chajjas by making good with pcc 1:2:4 type b1 or rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound to top and sides and rendering 5 mm thick to soffits in cement mortar 1:3 including necessary formwork complete all as specified and directed. 5.00 m&l for filling the gaps at the junction of roof sheet and vertical wall any thickness, any position and on height upto 10 m form gl using cement concrete type c1 1:2:4 (using 20 mm graded aggregate) and finish both side of wall by 15 mm rendering in cement mortar 1:6 and applying two coats of cement base paint to match with existing surface to match as specified and directed. 6.00 m & l for brick work with sub class ‘b’ old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. 7.00 m & l for brick work except bricks old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. 8.00 m&l for brick work with sub-class `b bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:6 complete all as specified and directed. 9.00 m&l 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in cm 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. 10.00 m&l 18 to 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. 11.00 m&l for rough finished flat formwork to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc. 200 mm thick (horizontal or sloping) work as rough finished surfaces of concrete complete all as specified and directed. 12.00 m & l for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. 13.00 s&f 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed. 14.00 s&f 30 mm thick flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side with decorative face veneer with liping/frame to match complete all as specified and directed. 15.00 s&f 30 mm thick flush shutters, solid core construction, with mdf board and both face is covered with decorative face veneer with 6mm thick teak wood lipping/ frame to match complete all as specified and directed. 16.00 taking down chowkhats or frames area not exc. 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. 17.00 taking down chowkhats or frames area exc. 1.50 sqm but not exc. 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. 18.00 taking down shutters of any description not exceeding 1.0 sqm each complete all as specified and directed. 19.00 taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed. 20.00 s & f 30 mm thick (style thickness) factory made solid panel pvc shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour pvc sheet to be fitted in the ms frame welded / sealed to the stiles and rails with suitable pvc sheets beading and joined together with solvent cement as per specification and drawing given on mes schedule part – ii (2010) complete all as specified and directed. 21.00 s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of wire gauze in lieu of plain colour pvc sheet. the wire gauze shall be wrapped on an additional square 8mm ms solid tube and this tube shall be welded to ms tubes. the wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing as per specification and drawing given on mes schedule part – ii (2010) complete all as specified and directed. 22.00 s&f factory made solid pvc moulded door shutter with particle board core, 28 to 30 mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face & 2mm plain colour pvc sheet on back face suppling and fixing in the frame at site as per specification & drawing on si page no. 161 of ssr part-ii complete all as specified and directed. 23.00 s & f factory made solid pvc door frame of size 50 mm x 47 mm made out of 5 mm plain coloured pvc sheet reinforced with mild steel square tube as per specification and drawing given on mes schedule part – ii (2010) complete all as specified and directed. 24.00 s & f factory made solid pvc double door frame of size 50 mm x 95 mm made out of 5 mm plain coloured pvc sheet reinforced with mild steel square tube as per specification and drawing given on mes schedule part – ii (2010) complete all as specified and directed. 25.00 s&f 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. 26.00 s&f 100 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. 27.00 supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 28.00 s & f 100 mm long medium weight, cold rolled mild steel butt hinges with screws complete all as specified and directed. 29.00 s & f ms helical door spring 150 mm size including roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed. 30.00 s & f 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 31.00 s & f 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 32.00 s&f in repairs mortice locks suitable for aluminium door of 100 mm size 4 lever aluminium body vertical type as per existing or sample complete all as specified and directed. 33.00 s&f in repairs 25 mm dia harrison rail, mild steel, chromium plated with & includig suitable fixing cp brackets, stops, rollers etc. complete all as specified and directed. 34.00 s & f floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm complete all as specified and directed. 35.00 s&f in repairs aluminium (die cast) body door closer hydraulically regulated, designation no 3, universal type, suitable for door shutters of 851 to 1000 mm in width of and of weight between 61 to 80 kg. (extruded section) complete all as specified and directed. 36.00 s&f stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. 37.00 all as per item no. 36.00 above but for in repairs 38.00 supply only double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed 39.00 s&f decorative type wooden finish double brackets support for holding curtain rods and corner to be fixed to ends of curtain rod fixing with screws complete all as specified and directed. 40.00 s & f mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work confirming to fe-290 gde e-165 complete all as specified and as directed by engr-in-charge. 41.00 m&l for mild steel tmt bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. 42.00 m&l for mild steel tmt bars 5 mm to 10 mm dia.,cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. 43.00 s & f of structural steel work as in tubular trusses including special shaped washers etc. complete using erw or induction butt welded tubes conforming to is – 1161 – 1979 grade st – 240 including fabrication complete all as specified and directed. 44.00 s & f steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. 45.00 s&f steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded complete all as specified and directed. 46.00 s&f steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed. 47.00 s & f of pressed steel frame of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. 48.00 s & f of pressed steel frame of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. 49.00 s&f powder coated anodised aluminium frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed. 50.00 s&f standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by ge) for window (sliding three track/two track/fixed or louvers type) and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing or gaskets for fixing glass, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement , screws, plugs, handle, lock, roller nylon ball bearing etc, complete all as specified and directed. note :- glass and wire mesh shall be measured and paid separately under respective items. 51.00 s&f powder coated aluminium door shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified and directed. 52.00 s & f 2 mm thick fibre glass reinforcement translucent corrugated sheeting with two corrugation side lap fixed with coach scrw and washer in roof, wall etc complete all as specified and directed. 53.00 s&f pre-painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50 mm tct (total coated thickness) of any colour having tensile strength of 550 mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. 54.00 s&f pre-painted galvalume aluminum zinc coating gi based plain steel sheet 0.50 mm tct (total coated thickness) of any colour having tensile strength of 550 mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. 55.00 taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. 56.00 s&f 4 mm thick e-board (designer pattern) celing of size 60x60 cm, fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm gi wire complete all as specified and directed. 57.00 s&f in repairs 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white laminated fixed with screw to timber / aluminium frame work complete all as specified and directed. 58.00 m&l in replacement for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and direct 59.00 m&l 75 mm thick, pcc 1:3:6, type c-2, (using 40 mm graded crushed stone aggregate) as in hardstanding, floors, paths, etc, finished even and fair without using extra cement complete all as specified and directed. 60.00 m&l for 25 mm thick pcc 1:2:4 type b0 (using 12.5 mm graded stone aggregate) in floorings including finishing the surface even and fair to receive floor finishes complete all as specified and directed. 61.00 m&l for vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough complete all as specified and as directed 62.00 m&l 8-10 mm thick premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick backing in cm 1:3 complete all as specified and directed. 63.00 m&l coloured glazed ceramic tiles 350x 250x 7 mm/ 450x 350x 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing with cm 1:3 complete all as specified and directed. 64.00 m&l non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, as in skirting/dado on vertical surfaces over etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cm 1:4 complete all as specified and directed. 65.00 m&l non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm in cement mortar 1:4 complete all as specified and directed. 66.00 m&l non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.36 sqm, as in skirting/dado on vertical surfaces over etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including backing 10 mm in cement mortar 1:3 complete all as specified and directed. 67.00 dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. 68.00 m&l for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. 69.00 m&l rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) complete all as specified and directed. 70.00 m&l for rendering 15 mm thick in two layers of 10 mm thick and 5 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound @ 200ml per bag of cement or as per manufacture instruction complete all as specified and directed. note:- wpc shall be measured and paid separatley. 71.00 m&l for rendering 5 mm thick in cm 1:3 on ceiling finished even and fair complete all as specified and directed. 72.00 taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 73.00 m&l preparation of old decorated ceiling surfaces by brooming down or steel wire brushing scraping down smoke spot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.ied and 74.00 m&l for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. 75.00 m&l for prepration of new plastered surfaces of wall and applying two coat of oil emulsion distemper over a coat of alkali resistant primer over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. 76.00 m&l complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of alkali resistant primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. 77.00 m&l preparation of old decorated wall surface and including applying two coat of oil bound distemper complete all as specified and directed. 78.00 m&l preparation of old plastered wall surfaces and including applying one coat of cement base paint complete all as specified and directed. 79.00 m&l preparation of new plastered wall surfaces and inlcuding applying two coats of weather coat exterior paint over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. (note:- the rate are inclusive of necessary scaffolding) 80.00 m&l preparation of new plastered wall surfaces and including applying two coats of cement base paint complete all as specified and directed. 81.00 m&l for complete removal of existing treatment of old decorated wall surfaces by washing with jet washer machine, removal of nails etc & filling cracks / hole with putty, applying one coat of primer using auto roller and applying a thin layer of wall care putty and sanding the same by vacuum based sanding machine till obtaining even and smooth finish and applying two coats of exterior weather coat paint using auto roller complete all as specified and directed as per manufacturers instructions.note:-multipurpose mixer shall be used for uniform and proper mixing of putty. 82.00 s & f sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. 83.00 s&f in repairs 5.50 mm thick plain sheet glass ordinary quality fixed with aluminium frame work exc 0.50 sqm in each pane complete all as specified and directed. 84.00 s&f for 12 mm thick clear toughned glass as in hinged doors, partitions automatic doors and similar work including all fixing arrangement, cutting to shape, drilling holes required ss cleats with screws,silicone sealent including 300 mm ss handle, heavy duty ss top hinges, door rubber gusket etc complete all as specified and directed. 85.00 s & f 4 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed . 86.00 hacking out old broken glass (any thickness, size, quality or description) from steel/wooden frames or stones, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed. 87.00 m&l preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 88.00 m&l preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 89.00 s & f for in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 90.00 taking up or down 15 mm dia steel tubing and connections, complete all as specified and directed. 91.00 taking up or down 20 mm dia steel tubing and connections, complete all as specified and directed. 92.00 taking up or down 25 mm dia steel tubing and connections, complete all as specified and directed. 93.00 s&f 15 mm bore galvanised steel water tubing medium grade and including necessary gi fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. 94.00 s&f 20 mm bore galvanised steel water tubing medium grade and including necessary gi fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. 95.00 s&f 25 mm bore galvanised steel water tubing medium grade and including necessary gi fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. 96.00 cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 250 ltr to 500 ltr capacity pvc water storage tank without dismantling the tank incl writting the item tank cleaning on ____ indication the date, month & year of cleaning on external wall of tanks walls with synthetic enamel paint all as specified and directed by engr -in-charge. 97.00 cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 500 ltr to 1000 ltr capacity pvc water storage tank without dismantling the tank incl writting the item tank cleaning on ____ indication the date, month & year of cleaning on external wall of tanks walls with synthetic enamel paint all as specified and directed by engr -in-charge. 98.00 s&f in repairs rotational moulded polyethylene water storage tanks of 500 litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for hdpe water tank (minimum weight 45 gm), including 20 mm bore ball valves (minimum weight 210 gm) high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with gi wire (to prevent monkey menace) to tank complete all as specified and directed. 99.00 s & f in repairs 15 mm bore bib tap chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 100.00 s&f in repairs 15 mm bore bib tap chromium plated long body fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. 101.00 s&f in repairs 15 mm bore bib tap, two way, fancy type chromium plated, cast copper alloy, with crutch or butterfly handle and wall flange, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 102.00 s & f in repairs 15mm bore stop valve, cast copper alloy, concealed type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including cp nipple and socket complete all as specified and directed. 103.00 s & f in repairs 15 mm bore angle stop valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including cp nipple and socket complete all as specified and directed. 104.00 s&f in repairs 25 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. 105.00 s&f in repairs waste fitting 32 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. 106.00 s&f in repairs pvc connections 15 mm size with ptmt nuts, of length 600 mm & suitable for hot water supply complete all as specified and directed. 107.00 s&f in repairs ball valves 20mm dia high pressure of ptmt with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (minimum weight 20 mm - 210 gms ) complete all as specified and directed. 108.00 s & f grating doom 100 mm dia with waste hole of ptmt. (minimum weight 25gms) complete all as specified and directed. 109.00 s&f stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed 110.00 s&f stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed 111.00 s&f of 50 mm bore pvc (swr) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. 112.00 s & f of 75 mm bore pvc (swr) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. 113.00 s & f of 110 mm bore pvc (swr) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. 114.00 s & f 75 mm bore pvc (swr) bends of any radius, fixed with cement solvent, with oval access door complete all as specified and directed. 115.00 s & f 110 mm bore pvc (swr) bends of any radius, fixed with cement solvent, with oval access door complete all as specified and directed. 116.00 s & f 75 mm bore pvc (swr) junction single, (single t) equal or unequal, fixed with cement solvent, with oval access door complete all as specified and directed. 117.00 s & f 110 mm bore pvc (swr) junction single, (single t) equal or unequal, fixed with cement solvent, with oval access door complete all as specified and directed. 118.00 s&f in repairs 75 mm bore pvc (swr) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed. 119.00 s&f in repairs sink without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 405 x 355 x 178 mm and including 32 mm waste pipe & coupling complete all as specified and directed. 120.00 s&f vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel cp hinges complete all as specified and directed. 121.00 s&f in repairs vitreous china (white) flat back urinal half stall type 465x 355x 265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. 122.00 s&f in replacements urinal spreader of ptmt any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and directed. 123.00 s&f in repairs vitreous china squatting pan, orissa pattern white, size 580 x 440 mm with integral foot rest, p or s trap and including connection to trap and to flushing pipe including provn of line concrete holding ci anti -syphonage pipe complete all as specified and directed. 124.00 s&f as in repairs vitreous china wash basin white flat back size 580 x 450 mm excluding taps waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. 125.00 s&f in repairs pvc low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. 126.00 s&f in repairs swivel shower rose size 125 mm of brass chromium plated any colour (minimum weight 40 gms) for fixing with 15mm dia steel pipe complete all as specified and directed. 127.00 s&f in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs/pvc rawel plug with chromium plated brass screw and cup washer complete all as specified and directed. 128.00 s&f in repairs soap dish with metal dish chromium plated fixed to plugs brass screws complete all as specified and directed. 129.00 s&f in repairs 15mm bore dia brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 130.00 s&f in repairs center hole basin mixer single leaver without pop-up waste system suitable for table top wash basin etc complete all as specified and directed. 131.00 s&f in repair health faucet (abs body) mild steel chromium plated suitable for 15 mm dia pipe with 1 metre long flexible tube and abs wall hook including making connections and fixed in position complete all as specified and directed by engr-in-charge. 132.00 s&f in repairs pvc waste pipe for urinal / whb 32 mm / 40 mm bore with one end with socket complete all as specfied and directed. 133.00 demolition of brick work in cement motor including pillar etc below / above ground level etc and removing to a distance not ex 50 meter complete all as specified and directed. 134.00 demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and directed. 135.00 demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (below or above ground level) complete all as specified and directed. 136.00 demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 137.00 dismantling framed timber scantlings 40 sqcm and over in section and in any position in framed work complete all as specified and directed. 138.00 dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 139.00 dismantling of corrugated or semi corrugated asbestos cement (ac) sheets in roof covering complete all as specified and directed. 140.00 dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed. 141.00 m&l for roof treatment in order of precedence as given below complete all as specified and as directed:- (i) taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per sqm. (ii) 15 mm thick screed bed in cm 1:4 on surface. (iii) cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 ltr / sqm. (iv) supply and laying 3 mm (minimum) thick app based polymeric membrane of approved manufacturer with weight not less than 3.60 kg per sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per sqm. polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (cont.) 141.01 (v) applying one coat of water proofing paint with aluminium finish over app as per manufacturers instruction.note :- (a) bituminous primer shall be shalitex primer manufactured by m/s stp ltd or equivalent in m/s sika india pvt ltd or m/s fosroc chemicals or m/s hindcon chemicals limited or m/s iwl india limited(b) laying app based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) a minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction. 142.00 s&f factory made 60 mm thick puf (polyurethane foam) sandwich panel suitable for outer wall having both side gi sheet skin of 0.50 mm thick (total coated thickness), colour coated (ral 7032), pre-painted galvanized iron crca sheet conforming to is 14246-1995 with 50 micron pvc guard film on both side external face of gi sheet skin for protection against scratches during handling and transportation. base metal of gi sheet skin shall be as per is 513 and galvanization conforming to gr-120, is 277. gi sheet skin shall have minimum coating of 5 micron epoxy primer and 25 micron polyester top coat on external face and 7-8 micron primer alkyd backer on inner face which is in contact with polyurethane foam. all opening and sheet termination shall be closed with appropriate factory made flashing / trims (ridge, corner flashing, gable ends,framed opening etc) including taking down complete all as specified and as directed. 143.00 s&f factory made 40 mm thick puf (polyurethane foam) sandwich panel suitable for outer wall having both side gi sheet skin of 0.50 mm thick (total coated thickness), colour coated (ral 7032), pre-painted galvanized iron crca sheet conforming to is 14246-1995 with 50 micron pvc guard film on both side external face of gi sheet skin for protection against scratches during handling and transportation. base metal of gi sheet skin shall be as per is 513 and galvanization conforming to gr-120, is 277. gi sheet skin shall have minimum coating of 5 micron epoxy primer and 25 micron polyester top coat on external face and 7-8 micron primer alkyd backer on inner face which is in contact with polyurethane foam. all opening and sheet termination shall be closed with appropriate factory made flashing / trims (ridge, corner flashing, gable ends,framed opening etc) including taking down complete all as specified and as directed. 144.00 s&f 0.50 mm thick (total coated thickness) galvalume sheet as in flashing / wall cladding in inner and outer face of wall, bent / made to shape as per site requirement as in u channel, door & window, side gap, outer corner, inner corner, gable end & ridge of size 0-151 mm, having yield strength 550 mpa (minimum), coated with hot dip alloy of 55 % aluminium, 43.5 zinc, 1.5% silicon and finished with resin coat on both side @ 150 gm / sqm of coating (total both surfaces) having overall width and laid width as specified, fixed using hot dipped galvanized, self drilling screws, neoprene and epdm washers. penetration and laps shall be sealed with proper sealant, fillers including taking down complete all as specified and as directed. 145.00 s&f 0.50 mm thick (total coated thickness) galvalume sheet as in flashing / wall cladding in inner and outer face of wall, bent / made to shape as per site requirement as in u channel, door & window, side gap, outer corner, inner corner, gable end & ridge of size 301-600 mm, having yield strength 550 mpa (minimum), coated with hot dip alloy of 55 % aluminium, 43.5 zinc, 1.5% silicon and finished with resin coat on both side @ 150 gm / sqm of coating (total both surfaces) having overall width and laid width as specified, fixed using hot dipped galvanized, self drilling screws, neoprene and epdm washers. penetration and laps shall be sealed with proper sealant, fillers including taking down complete all as specified and as directed. 146.00 dismantling of puff panel 60 mm and 40 mm complete all as specified and directed. 147.00 dismantling of wall cladding/flashing any size complete all as specified and directed. 148.00 s&f providing and fixing 5-6 mm thick hollow pvc ceiling/ panel made with high density fiber wpc/pvc board having density 600 kg/ cubic meter, moisture, termite & borer proof as substrate with pre laminated face in approved shade and balancing layer on the reverse side suitably placed in false ceiling/wall liing including gi frame work for seamless ceiling comprising of gi perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with gi cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified  149.00 s&f stainless steel glass door patch fitting series – patch lock suitable for 10-12 mm toughened glass door lock complete all as specified and directed. 150.00 checking of aluminium joinery door/window/ventilator etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, rubber gusket, plug etc to make it functional complete all as specified and directed.note :- any items required to be replaced shall be paid under respective items. 151.00 supply and laying of cpvc pipes 20 mm outer dia sdr-11 & plain cpvc sdr 11 fittings (incl all fittings like brass fta, mta, elbow, tee, union, adaptor etc) (concealed type) on wall /ceiling or laying in floor complete all as specified and as directed 152.00 supply and laying of cpvc pipes 25mm outer dia sdr-11 & plain cpvc sdr 11 fittings (incl all fittings like brass fta, mta, elbow, tee, union, adaptor etc) on wall /ceiling or laying in floor complete all as specified and as directed 153.00 supply and fix, as in repair, vitreous china wash basin, of size 40d x 49w x 15h centimeter table top wash basin for bathroom made of ceramic star white rectangular shape over the counter basin complete all as specified and directed. 154.00 s&f vitreous china one-piece aspiro floor mount western commode for bathroom | soft close feature | made of ceramic | star white finish | oval shape western toilet | floor mount ewc and connection for drain etc complete all as specified and directed.