providing basic tourist amenities near ghatghar dam area for tourist tal akole, dist. ahilyanagar.-excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (lift upto 1.5 metre) by manual means. excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (lift from 1.5 metre) by manual means. providing dry/ trap/ granite/quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete. providing and laying cast in situ/ ready mix cement concrete in mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based programmable logic controller with superwisery control and data acquisition enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand v.s.i. grade). providing and laying in situ/ ready mix cement concrete mix-30 of trap/ granite/quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based programmable logic controller with superwisery control and data acquisitionenabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete, with fine aggregate (crushed sand v.s.i. grade). providing and laying cast in situ/ ready mix cement concrete mix-30 of trap/ granite/quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel) with fully automatic micro processor based programmable logic controller with superwisery control and data acquisitionenabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete with fine aggregate (crushed sand v.s.i. grade). providing and laying cast in situ/ ready mix cement concrete mix-30 of trap/ granite/quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel), with fully automatic micro processor based programmable logic controller with superwisery control and data acquisitionenabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete with fine aggregate (crushed sand v.s.i. grade). (186) providing and fixing in position thermo mechanically treated (tmt) fe -500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, making riveted/bolted/welded connection and painting one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. providing and applying two coats of synthetic enamel paint of approved colour to new/ old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. providing and fixing plain zinc sheeting of 0.80 milimetre thick (22 b.w.g.) over the ridge hip or velley to galvanised iron sheet roofing including all fastening and bolt galvanised iron screws and bolts and lead and bitumen washers complete. (weight of 6.8 kg per square metre). (187) providing and erecting a wire rope safety barrier with vertical posts of medium weight rolled steel joist indian standard medium beam series) 100 milimetre 75 milimetre (11.50 kilogram per metre), 1.50 metre long 0.85 metre above ground and 0.65 metre below ground level, split at the bottom for better grip, embedded in mix- 15 grade cement concrete 450 x 450 x 450 milimetre, 1.50 metre center to center and with 4 horizontal steel wire rope 40 milimetre diameter and anchored at terminal posts 15 metre apart. terminal post to be embedded in mix-15 grade cement concrete foundation 2400 x 450 x 900 milimetre depth), strengthened by a strut of rolled steel joist 100 x 75 milimetre, 2 metre long at 45 degree inclination and a tie 100 x 8 milimetre, 1.50 metre long the bottom, all embedded in foundation concrete as per approved design and drawing, rate excluding excavation and cement concrete). providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. providing hard murum side shoulder including supplying hard murum at the road site, including spreading and compacting for sidewidth layers on each side with vibratory roller including artificial watering etc complete. providing and fixing informatory sign boards in square or rectangular shape of size 1.80 metre x1.20 metre made out of 3 milimetre aluminum composite panel bonded with indian road congress specified colour retro reflective sheeting (hip) having pressure sensitive/ heat activated adhesive, indian road congress specified colour retro reflective cutout border and messages having pressure sensitive adhesive having border and messages in indian road congress specified colour background including mild steel angle iron frame of size 35 milimetre x 35 milimetre x 5 milimetre and two mild steel angle iron post of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 centimetre width including galvanised iron fixtures etc. fixing the boards in m-20 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including transportation etc. complete. providing and applying two coats of exterior acraylic emulsion paint conforming to corresponding i.s.of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days etc. providing cast in situ / ready mix m-15 grade cement concrete for head walls of cross drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. with fine agreegates of required specifications (vsi sand finely washed etc.), cement 6.00 bags/cum). providing and errecting chain link fencing 1.6 metre height with galvanised iron chain link of size 50 x 50 milimetre 8 guage thick and fixed 75 milimetre above ground level on vertical mild steel angle of 40x40x6 milimetre size including excavating pits for foundation bends embeded in concrete blocks of 1:4:8 of size 450x450x670 milimetre at 1.75 metre center to center with welding link with angle frame at 30 cm. c/c nuts and bolts and embeded in cement concrete block of 1:4:8 mix of size iron bar 16 milimetre diameter as hold fast including and horizontal mild steel angles at top and bottom of 25x25x5 metre size and vertical mild steel flat 35 x 5 metre and 25 x 5 metre horizontal including cross support of 40x40x6 metre angles both sides at every corner or 450x450x670 milimetre including 3 coats of oil painting etc. complete. providing sills of granite other than makrana 20 milimetre to 25 milimetre thick, on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges and cleaning complete. providing and fixing 90 centimetre x 60 centimetre granite plate engraving 10 centimetre height letter, figures including painting the letters/ figures with approved colour and shade complete. providing & fixing bench in cement mortor/concrete with rmt wooden finishing on all external surface. bench should have min. 2.1m to max. length 2.4m with 0.45m wide seat & 0.40m high back for resting. beach should have 2 to 3 supports/legs as per requirement from ground in 1:1.5:3 ratio concrete with 4 bar 12mm as a main & distribution 8mm tor steel at 150mm c/c. rate includes proper cleaning of surface by sand paper application of 1 coat of apex exterior grade primer above that 2 coat of exterior grade apex paint as a base coat & 1 coat of apex paint for polish including cement. sand, aggregate. chemical, adhesive, chickenmesh. primer, paint. polish, paper, etc. all material. labor. scaffolding, excavation. pec, for steel etc. all complete. work done should be as per a approved sample & the instructions of engineer incharge. (191) providing second class burnt brick masonry with conventional / indian standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. providing and fixing high density polymer container syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters. providing and fixing on walls / ceiling / floor 20 milimetre diameter chlorinated poly venyl chloride pipe with necessary fittings, remaking good the demolished portion. including removing existing pipe line if necessary and conveying and stacking the same pwd chowky or as directed complete. providing internal cement plaster 20 milimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. planting small and medium size ornamental flowering plant-.digging pit with size 0.60x0.60x0.60m. removing rubbish and conveying unwanted stuff to required distance as directed. filling the pit with fresh garden soil and farm manure up to height of 0.60m in 3:1 proportion mixing the soil and manure throughiy well, levelling watering on previous night. planting one or 2 year healthy plant sapling as per specification maintaning till well established by watering, weedings, stirrings, prunning, replacing the casualties etc. complete. providing and laying in situ cement concrete m30 with tremix treatment for 200 millimeter thickness for flooring with groove cutting of 4 millimeter wide and millimeter deep with necessary refilling with bitumen complete. providing and fixing 40 milimetre diameter and 1.5 milimetre thick stainless steel hand railing in s.s. 304 grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe complete. (193) providing and fixing board displaying information, such name of work, tender cost, name of contractor, work completion and liability period etc., having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mm.) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/ symbols etc. with approved colour shade paint complete, on mild steel angle of size 35 milimetre x milimetre x 3 milimetre frame with properly cross braced mild steel angles of size 35 milimetre x 35 milimetre x 3 milimetre duly painted including two mild steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc. and fixing the boards in 1:4: concrete block of size 60 centimetre x 60 centimetre centimetre including, excavation, refilling, transportation and labour etc. complete. preparing instant lawn (20cm, depth):- excavating the ground to a required depth of (20cms, removed & conveying unwanted stuff to a required distance as directed, filling fresh garden soil/silt & maure in exavated area in 3:1 proportion to a height of 20cms. mixing garden soil and manure thoroughly well, leveling, and watering on previous night. planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling etc. complete. (194) providing and fixing heavy duty inter locking concrete rubber mould glossy paving blocks of 80 milimetre thickness of having a strength of 400 kilogram per square centimetre of approved quality and shape bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning etc. complete using 100 percent crushed sand. providing and laying in trenches 50 milimetre diameter chlorinated poly venyl chloride pipe with necessary excavation, fittings, refilling trenches. including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. providing and fixing heavy duty inter locking concrete rubber mould glossy paving blocks of millimeter thickness of having a strength of 400 kilogram per square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete using 100 percent crushed sand. providing and fixing kerbstone with led lighting system as per following specifications: dimensions with vertical mounting legs with 10 mm horizontal square shape mild steel reinforcements. illuminated kerb stone having visible dimensions of 500 mm x 150 mm 150 mm.(as per irc 86:1983) 80 mm legs having mild steel reinforcements shal be embedded in black topped/concrete road surface. the kerb stone should have kerb angle of 45 degree, with rubber plugs at both ends of the kerbstones (2 nos.) having load carrying capacity of vertical- 1465 kg, horizontal- 2349 certified by govt. recoganized bodies) having thermal stability -40 to +120 degree celcius (certified by govt. recoganized bodies. illuminated kerb stones including: ingrace protection and connector rating ip 67, electrical wire -(as per is: 694), led strip (as per lm:80) standard. including for electrical fixing -frp junction box consisting of - 10 amp. switch module power supply (smps) having input voltage - 230v ac, output voltage 36 v dcc, 2 pole mcb. illuminated kerb stones having warranty for 3 years. illuminated kerbstone shall be fixed into cast-in-situ cement concrete of m-20 grade at base, back filling and grooves, including dismantling, fixing, removal of dismantled material and cleaning etc. complete. the colour of kerb stone shall be provided as directed by engineer in charge. providing and fixing cautionary/warning sign boards in octagone size of 750 mm made out of 4 mm aluminum aluminum composite material with 0.5 mm skin thickness on either side, sheet bonded with white retro reflective sheeting of class c ( type xi micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per irc:67-2012 table no 8.3 supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of m. s. angle iron post of size 65 mm x 65 mm x 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including g.i. fixtures etc; fixing the boards in m25 grade concrete block of size 60cm x 60cm x 75cm including transportation etc; complete. class c ( type xi micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the engineer in charge by the contractor/supplier. (197) procurement, supply, fabrication, erection, installation of required size 35 mm x 35 mm x 5 mm (wherever required) and eps channel section, cross bracing in angle section of a m-20 grade plain cement concrete foundation of size 600 mm x 600 mm x 750 mm etc. complete of final height sign board to have clear and legible visibility, made with 100 mm x 50 mmx 5 mm thick panels of thickness 75mm. the base will be grouted with a 10-20 grade plain cement concrete foundation of size 600x600x750mm. its top shall be 50mm below the size of visible area 06 ft height x 3ft horizontal x 4ft vertical eps panel. providing and casting in situ or precast tapering reinforced cement concrete mix-20 barrier type kerb without gutter (as per irc:86-1983) embedded 125 milimetre below ground level over mix-10 plain cement concrete finished neatly with cement mortar 1:2, setting the same in cement mortar 1:2, including the required excavation in any strata and removing excavated stuff anywhere in city and redoing the surface as specified directed by engineering incharge. using concrete batching and mixing plant. no. of corrections executive engineer providing & fixing gazebo in cement mortor/concrete with wooden finishing on all external surface. gazebo should have min. 3m square in size 3.5m height at centre and 3m height at periphery with 4 vertical supports at connect each outer support to central support edge. gazebo should have 8 rafters (1 to and 4 to connect each other) and 3 purlins between each rafter to support slab. vertical supports should comprises of 100mm square ms (including outer concrete), rafter should comprises of 50mmx100mm ms box pipe 6mm thick including outer concrete), purlins should comprises of 30mmx50mmx6mm ms angle section with total size of 75mmx 100mm (including outer concrete). outer concrte around every element should be in 1:1.5:3 ratio concrete. the concrete for slab above purlins should be of 100-120mm thick in 1:1.5:3 ratio rcc with 8mm tor steel at 150mm c/c bothways. rate includes proper cleaning of surface by sand paper application of 1 coat of apex exterior grade primer above that 2 coat of exterior grade apex paint as a base coat & 1 coat of apex paint for making wooden finish/grains & with 2 final coat of apex clear polish including cement. sand, aggregate. chemical, adhesive, chickenmesh. primer, paint. polish, paper, etc. all material. labor. scaffolding, excavation. pec, for steel etc. all complete. work done should be as per a approved sample & the instructions of engineer incharge. (199) providing & fixing bamboo finish railing in cement mortor of 1:3 proportion with appropriate thickness resembling bamboo of diameter 2 to 3 inch. railing clear height 1.0m with underground support of minimum 0.45m depth of 1:1.5:3 ratio concrete of size 0.3 x 0.3 x 0.6m. vertical supports should be at min. 1.0 m intervals & with 10mm tor steel 2nos in each horizontal member & 3nos in each vertical member. railing will have two horizontal & two diagonal members in each panel. all external surfaces will have bamboo finish. rate includes proper cleaning of surface by sand paper application of 1 coat of apex exterior grade primer above that 2 coat of exterior grade apex paint as a base coat & 1 coat of apex paint for making wooden finish/grains & with 2 final coat of apex clear polish including cement, sand, chemical, adhesive, chikenmesh, primer, paint, polish, paper, etc. all material, labor, scaffolding, etc. all complete providing & fixing selfie point in cement mortor/concrete with wooden finishing on all external surface. selfie point should have min. 3m in length and 3.5m height. selfie points outer concrte around every element should be in 1:1.5:3 ratio concrete. the concrete for base slab above should be of 100-120mm thick in 1:1.5:3 ratio rcc with 8mm tor steel at 150mm c/c bothways. rate includes proper cleaning of surface by sand paper application of 1 coat of apex exterior grade primer above that 2 coat of exterior grade apex paint as a base coat & 1 coat of apex paint for making wooden finish/grains & with 2 final coat of apex clear polish including cement. sand, aggregate. chemical, adhesive, chickenmesh. primer, paint. polish, paper, etc. all material. labor. scaffolding, excavation. pec, for steel etc. all complete. work done should be as per a approved sample & the instructions of engineer incharge. (201) providing & fixing entrance gate in cement mortor/concrete with wooden finishing all external surface. entrance gate should two having min. 4.8m height out of which 1m should columns on sides and 1 beam on top with columns be embeded in ground and beam clear span should be of 3.75m. column outer diameter should be 0.63m and beams outer diameter should be 0.59m. column consists of l section with 75x75x5 mm 4 angles one at each corner and bracings with l section 25x25x4 mm as shown in drawing. outer concrte around every element should be in 1:1.5:3 ratio concrete. the concrete for slab should be of 120- 150mm thick in above purlins rcc with 8mm tor steel 150mm 1:1.5:3 ratio c/c bothways. rate includes proper cleaning of surface by sand paper application coat of apex exterior grade primer above that 2 coat exterior grade apex paint as a base coat & 1 coat apex paint for making wooden finish/grains & with 2 final coat of apex clear polish including cement. sand, aggregate. chemical, adhesive, chickenmesh. primer, paint. polish, paper, etc. all material. labor. scaffolding, excavation. pec, for steel etc. providing and installation of telemetry rain gauge of tipping bucket type with resolution 0.25 mm.( for safety of tourist it will give warning regarding heavy rainfall easy evacutation of tourist) providing and installation of radar water level sensor range 0-30 m.(for tourist safety it will give warning heavy flood) (202) testing charges for conducting basic test of aggregate. water absorption, gravity, impact value crushing value test. testing charges for conducting basic test of aggregate. sieve analysis test. testing charges for conducting fine aggregates. fineness modulus (sieve analysis), silt & clay content test. testing charges for conducting bricks water absorption (set of 5 bricks), compressive strength (set of 5 bricks), efflorescence (set of 5 bricks) test. testing charges for natural stone.determination of water absorption, specific gravity test. testing charges for conducting concrete compressive strength of cement concrete cube set of 3 cubes) test. testing charges for conducting concrete mix design with all tests on basic materials). testing charges for conducting concrete paving blocks compressive strength,water absorption test set of 8 blocks). testing charges for conducting mortar compressive strength( set of 3 cubes) test. testing charges for conducting stone/ rubble crushing value/compressive strength,water absorption & specific gravity test. testing charges for conducting soil / murum sieve analysis test. testing charges for conducting soil / murum liquid limit & plastic limit test. testing charges for conducting soil / murum compaction test (proctor density). testing charges for conducting soil / murum c.b.r. test (lab) excluding compaction test. testing charges for conducting soil / murum field density test by sand replacement method. testing charges for conducting steel bar testing upto 16 mm (set of 3 bars) royalty charges