tender for spl repair to bldg no t-244 at certain location of misa camp under ge (s) tezpur; 1 taking down chowkhats incl shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each. 2 taking down chowkhats incl shutterrsn exc 1.5 sqm (without taking off shutters from the frame). 3 dismantling water tanks of capacity exc 250 litre & not exc 500 litre and removing to store complete. 4 demolition of rccof any description specifically provided for. 5 dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises 6 demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed. 7 demolition of brick work built in cement mortar including all quions, arches pillars etc.all as specified and directed. 8 dismantaling of timber framed scantlings 40 sq. cm and over in section, in any position 9 dismantling of boarding, any description and any position, fixed with nails, complete all as specified and as directed. 10 taking up or down steel tubing of size 15 mm and connections, including cleaning for refixing or removal to store 11 taking up or down steel tubing of size 20 mm and connections, including cleaning for refixing or removal to store 12 dismantlingof wall & ceiling boards (fibre,pulp, insulation etc), or insulation board/slabs/ blankets ,any thickness, including cover fillets. 13 dismantling of steel/galvised sheet corrugated / semi corrugated sheets in wall cladding or in roof covering 14 s&f 500 ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position 15 s & f in repairs 15 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as specified and directed 16 s&f in repairs 20 mm ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed 17 s&f 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors 18 s&f 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors 19 m&l for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends and edges oflandings, steps, cills, sunshades, shelves and lintels etc; and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth. 20 m&l for brick work using sub class ‘b’ bricks (old size) straight or curved on plan to any radius in half brick work built in cm 1:4 complete all as specified. 21 m&l for brick work with sub class b brickstraight orcurved on plan exc 6 mtr mean radius in cm (1:6) 22 material & labour for formwork to sides and soffits of concrete of beam, lintels, cantilevers etc. with rough finished square/rectangular surfaces of concrete complete all as specified and as directed. 23 m&l for rcc m-25 for slabs beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed. 24 m&l for tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 25 m&l for 10 mm thick plastering on other than fair faces of wall surfaces in cm (1:6)finished even & smooth (without using extra lime or cement)complete all as specified and directed 26 m&l for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth (without using extra lime or cement)complete all as specified and directed 27 m&lapplying two coats of distempering with oil emulsion, over providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. 28 m & l for preparation of new plastered surfaces of walls and applying two coats of weather shield exterior emulsion paint over a coat of white primerover a coat of 3 mm thick wall care putty complete all as specified and directed 29 supply only integral water proofing compound 30 m & l for screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes/tiles, complete all as specified and as directed 31 m & l for rendering or bedding layer 10mm thick in cement mortar 1:4 on walls, etc. for fixing tiles as skirtings, dados, etc, complete all as specified and directed. 32 m & l for 75mm thickplaincement concrete 1:3:6 type c2 using 40mm gradded agg as insub-base. 33 m & l for sand filling under floors or in foundations including watering and consolidationas insub-base. 34 m & l for non - skidcoloured ceramic tiles (joint free, coloured) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed 35 m & l for non - skid ceramic tiles (coloured) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed 36 m&l forcolour glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, in dado/skirtingset and jointed in neat cement slurry and pointed in white or coloured cement to match. 37 s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of m.s. tubes for top & bottom rails. m.s. frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing 38 s & f pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s. square tube, supply & fixing in opening as per specification & drawing. 39 s & f powder coated anodised aluminium frame for doors, three trackwindows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 40 s & f anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, tower bolts, handles, etc. complete all as specified 41 s & f 35mm thick flush moulded shutter , solid core construction ,with block board core and plywood face panel, commercial type on both side complete all as specified and directed. 42 s/f 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc.divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified and directed 43 s & f pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed 44 materials and labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe 410-0 or fe 310-0 complete all as specified and directed. 45 s/f 4mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete. 46 s/f galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staplescomplete all as specified and as directed. 47 s & f 150 mm size extruded aluminium alloy handles, fabricated type, anodised 48 s&f 200 mm aluminium anodisedbarrel tower bolt, of extruded sectionand fixed in position 49 s & f 100mm size ms butt hinges, medium weight, cold rolled. 50 s & f 75mm size ms butt hinges, medium weight, cold rolled. 51 s & f 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete. 52 s & f floor door stopper 14cm long of aluminium alloy bodyand tongue, anodised,with hard drawn steel spring,fixed in repairs in floor 53 s & f in repair 300mm, ordinary rat tail rod pattern door springs including roller and roller plate complete 54 s & f in repairs curtain rails, harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers,clamps etc. 55 excavation in post holes (or similar holes) each n exc 0.5 cum getting out , returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard cement concrete ,complete all as specified and directed 56 m&l for cement concrete cement concrete in bases of posts 1:2:4 type b0 using 20mm graded stone aggregate as inflooringcomplete all as specified and directed.. 57 s&fsteel workin tubularstrut,post, trussesfe 410 -w (gde- e- 250) quality- a includingspecialshaped washer etc completeusing erwor inductionbutweldedtubes, including fabrication and fixing conformingto is- 1161-1979 grade st-240 complete all as specified and directed 58 s&f roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) , steel tubes including distance pieces, cleats etc. 59 s&f mild steel screw bolts (machine made), diameter of neck 16 to 20mm, length of bolt exc 22.5cm and n exc 30cm longwith hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed. 60 preparation of new steel surfaces exc 10 cm width or grith and applying 2 coats of synthetic enamel paint over a coat of red oxide. 61 m & l for pre- painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with l type j type or cranked hook bolts as specified and directed 62 m & l for pre- painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall/eaves board, fixed wiith l type j type or cranked hook bolts as specified and directed 63 s&f in repair exposed gi powder coated snap grid frame of false ceiling600 x 600 mm size of wall angle25 x25 x 0.35mm size cross tee 24 x 38 x 0.70mm with 4mm dia gi suspenderfixed to roof slabs by means of ceilling cleats made out of g.i. flat 40 x 3 mm including supply and fixing of 6 mm thick e- board in false ceiling including fixing arrangement from roof and applying three coats of white wash on exposed surfaces all as specified and directed.(note- rate included for lowering / shortening of electric fittings such as fan, light fittings etc. 64 m&l 75mm thick p.c.c 1:3:6 type c-2 using 40mm graded stone aggregate as in plinth protection including forming construction joint filled with cm(1:6). 65 m &l pcc (1:3:6) type c-2 as in drain/surface channel and similar work . 66 s&f 110mm bore pvc (swr) pipe, single socketed in any length with rubber ring joints fixed to walls. 67 s&f 75 mm bore pvc (swr) pipe, single socketed in any length with rubber ring joints fixed to walls. 68 s&f 110mm bore pvc (swr) bend 69 s&f 75mm bore pvc (swr) bend 70 s&f 110mm bore pvc (swr) junction single, (single t) equal or unequal 71 s&f 75mm bore pvc (swr) junction single, (single t) equal or unequal 72 s&f 110mm bore pvc (swr) vent cowl 73 s&f in repairs vitreous china squatting pan, ‘orissa’pattern, size 680 x 470 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete 74 s&f in repairs 10 litre capacity pvc low level flushing cistern including pull chain & flush pipe, connection pipe etc complete all as specified & directed. 75 s&f 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. 76 s & f in repairs pvc connection 15 mm size with ptmt nuts of length 450 mm complete all as specified and directed 77 s&f in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes. 78 s&f in repairs 15 mm bore stop valve fency type with capstan heads, chromium plated screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions. 79 s&f in repairs pillar tapsfency type with capstan heads, chromium plated, srewed down high pressure, with or without lettered `hotor `cold with long srewed shanks and fly-nuts, screwed for iron pipe and fixed in 15 mm bore. 80 s&f in repairs 15mm bore 125mm size type brass chromium plated shower rose, complete all as specified. 81 s & f in repairs vitreous china white wash hand basin glat back of size 550 x 400 mm including brackets cp waste pipe and waste coupling 32 mm and pvc waste pipe and 15mm pvc connection complete. 82 s & f in repairs towel rail 600mm long of ptmt fixed with and including chromium plated brass screws and wooden/plastic cleats. (minimum weight 190gms) 83 s&f vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including waste coupling , waste pipe, angle valve, 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including of fixing supply pipe trap and waste pipe, urinal spreader of cpfor fixing with 15 mm dia pipe. (minimum weight 60gms) 84 m&l for preparation of new wooden surface and applying2 coats of synthetic enamelled paint over coat of pink primer over 10cm width or girth complete. 85 s & f 25 x 3mmflat iron hold fast conforming to fe 410-0 complete 86 taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches,ceiling roses,pendants,regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. 87 m&l for point wiring with pvc insulated and unsheathed frlsh cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to is - 694 1990 drawn through and including pvc concealed conduit 20mm dia medium dutywith all accessories including modular gi boxes of suitable sizesincluding 1.5 sq mm frlsh stranded pvc insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fanpoint controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ switch socket outlet 5 amps complete all as specified and as directed.note: (i) red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (rate deemed to be inclusive of cutting chases and making good disturbed surface). 88 all as per item no. 87 here-in-before but one 3 pin 5 ampsswitch socket commbination on the independent board with other switch complete all as specified and directed by engineer-in-charge. 89 all as per item no. 87 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by engineer-in-charge. 90 m & l for point wiring for socket out let on 16 amps independent boards controlled by one, one wayswitch using 2.5 sqmm nominal cross sectional areamultistrandedcopper conductor, pvc insulated unsheathed frls cables in and including 20 mm dia or higher size pvc concealed conduits and fittings, including metal flush box suitable for modular cover plate with frame of suitable size of 3m and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor frls pvc insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc. complete all as specified and directed.note: (i) red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (rate deemed to be inclusive of cutting chases and making good disturbed surface). 91 m & l for point wiring for socket out let on 16 amps independent boards controlled by one, one wayswitch using4.0 sqmm nominal cross sectional areamultistrandedcopper conductor, pvc insulated unsheathed frls cables in and including 20 mm dia or higher size pvc concealed conduits and fittings, including metal flush box suitable for modular cover plate with frame of suitable sizes and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor frlspvc insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc. complete all as specified and directed.(rate deemed to be inclusive of cutting chases and making good disturbed surface). 92 s&fmodular type switch6 amps 230v ac single module one way complete all as specified and as directed. 93 s&f modular socket out let 3 pin 10 amps shuttered type 230v ac 2 module complete all as specified and as directed. 94 s&f modular socket out let 3 pin 16 amps shuttered type 230v ac 2 module complete all as specified and as directed. 95 s&fmodular type switch16 amps 230v ac single module one way complete all as specified and as directed. 96 material and labour for ceiling rose polycarbonate isolated body 3 ways terminalscomplete all as specified and as directed. 97 supply and fix modular type electronic fan regulator complete all as specified and as directed. 98 supply & fixing lamp holder, pvc/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified. 99 supplying and fixing in repairtwo single core ,6 sqmm nominal cross sectional areamultistrandedcopper conductor fr cable, pvc insulated unsheathed 1100 volts gradedrawing in and including nd including suitable size pvc conduit (isi marked) concealed including6 sqmm nominal cross sectional areamultistrandedcopper conductor fr cable, pvc insulated unsheathed 1100 volts grade earthwirecomplete all as specified. note : two run of 6 sqmm wire with one run of 6 sqmm and one run of casing capaing / conduit pipe shall be measured against one unit. 100 supply and fixed in repair 18 w led light fitting wall mounted batten 4ft ,minimumm lumen output 100 lumen/wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6500k including necessary connection complete all as specified and directed. 101 supply and fixed in repair 10 w led light fitting wall mounted batten 2ft ,minimumm lumen output 100 lumen/wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 09 watt,6500k including necessary connection complete all as specified and directed. 102 supply and fixed in repair security light fittings 30 watts, minimumm lumen output 100 lumen/watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual led with secondary optic and ip65 including necessary connection complete including 25mm dia light grade gi bracket with nut bolt and clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed. 103 supply & fix in replacement of led bulb 15 watt 6500 k complete all as specified and as directed. 104 supply and fixed in repairs epoxy powder coated sheet metal enclosure for dbs, double door, triple pole and neutral 415 v, 4 ways with mounting fitted with bus bar, din channel , neutral link and incoming contact complete all as directed. 105 supply and fixed in repairs epoxy powder coated sheet metal enclosure for dbs, double door (when mcbs to be used), single pole and neutral 240 v, 8 ways with mounting fitted with bus bar, din channel ,neutral link and incoming contact complete all as directed. 106 supply and fixed in repairsmcb sp,6 to 32 amps, c series 10ka, 240 volts and to be housed in dbs including necessry connection complete all as specified and directed. 107 supply and fixed in repairs mcb spn 6-32 amps,c series 10ka, 240 volts and to be housed in dbscomplete including necessry connectionall as specified and directed. 108 supply and fixed in repairs mcb tpn 63 amps,c series 10ka, 415 volts and to be housed in dbscomplete including necessry connectionall as specified and directed. 109 taking down of ac ceiling / exhaust fan of any sweep & any height and opening the fan and oiling, greasing andreplacementofunserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan as directed by the engr-in-charge. 110 taking down existing geyser of any size and make upto 25 ltrs carefully, by diconnecting electrical and water pipe line connection and deposite at mes yard/store for refixing. 111 refixing of existing geyser 25 ltrs as per above item by connecting electrical and water pipe line connection. 112 material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using gi wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, gi earth strip encased inand including 40 mm dia gi lightgrade pipe from upper end of earth plate upto equipments,20 dia bore gi pipe light grade as water pipe from earth chamber to upper edge of earth plate, test point , gi funnel with wire mesh fixed on water pipe andpcc 1:2:4 type b-1 (using 20mm graded stone aggregate) as in pit chamber and rcc pit cover 50mm thick precast rcc 1:2:4 type b-1, duly reinforced with ms round bars 6mm dia @ 100 c/c both ways with 10mm dia ms round bar as in lifting handles, excavation, earth work including laying the gi pipe concealed in floor/wall all as describedin electric plate of ssr part i completeall as specified and directed and testing on completion. 113 supply, laying / fixing / connecting, testing and commissioning of 35 sqmm x 4.0 core lt under ground cable xlpe insulated, screened, pvc bedded, galvanised steel strip or wire armoured,electric cable (heavy duty) with multistranded aluminium conductor,1100 volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of ms saddle clips (where ever cable laid in ceilings / walls without cable duct)including taking down old unserviceable cable all as directed by the engr-in-charge. 114 notes:1.the amount of schedule of credit shall be deducted from the total of this boq for arriving at contract sum.2.the rates for rcc/pcc shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. refer schedule a notes for details.