tender for wiring and other allied works at 3 no. sub-stations, jee office, lt panel rooms, fire panel and fire store room at hindu rao hospital.; 1 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. (a) group c 2 rewiring for light point /fan point /exhaust fan point /call ball point with 1.5 sq.mm frls pvc installed copper conductor single core cable and 1.5 sq. mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel/ pvc conduit including dismantling as required group c 3 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 15/16 amp switch 4 b) 3 pin 5/6 amp socket outlet 5 c) 6 pin 15/16 amp socket outlet 6 d) 5/6 amps switch 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 8 supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required. (a) 3 module (100mmx75mm) 9 b) 6 module (200mmx75mm) 10 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessedpvc conduit as required. 11 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 12 4 x 2.5 sq. mm + 2 x 2.5 sq. mm earth wire 13 supplying and fixing following way, single pole and neutral sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator)(a)08way , double door 14 supplying and fixing following rating, double pole, 240 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.40 amps 15 supplying and fixing 5 amps to 32 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole 16 supply of 12(300 mm)sweep 1400 rpm heavy duty exaust fan complete with ring, blade etc as required. isi marked. 17 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.upto 450 mm sweep 18 sitc of wall mounted fan 400mm sweep rated voltage 220-230 ac rated frequency 50hz speed 1280-1350 rpm with desired color 19 led batten light (system lumen efficacy ≥105 <120 lm/watt) supplying, installation, testing &commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85% ,operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% , p. f.≥0.95, ip20, cri >80, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends, cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin),sdcm(standard deviation color matching) <3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy ≥105 <120 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90°c). powder coated die cast / extruded aluminium body (thickness ≥ 1.20 mm) 18-22 watt 20 brush less direct current (bldc) motor supply, installation, testing and commissioning of ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos. metal (aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/al body power factor not less than 0.9,service value (cm/m/w) minimum as below, 350 rpm (tolerance as per is : 374-2019), thd (total harmonic distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac ceiling fan compliant to is 374:2019 fan supply, earthing etc. complete as req 1200mm, service value ≥ 6.0 cm/min/watt, air delivery 210 cm/min (minimum)