tender for repair work of inspection building and residential colony located at rawatpur in unnao district. - dismantling reinforced cement concrete or reinforced brick work, including stacking of dismentaledmaterials as directed by the engineer-in-chargewith in a distance of 50 meters. 2 dismantling b/w or stone work in lime or cement mortar andincluding stacking of dismentaledmaterials as directed by the engineer-in-chargewith in a distance of 50 meters. 3 dismantling door and windows.chowkhats with hold fastandincluding stacking of dismentaledmaterials as directed by the engineer-in-chargewith in a distance of 50 meters. 4 dismantling existing plasterand including stacking of dismentaledmaterials as directed by the engineer-in-chargewith in a distance of 50 meters. 5 e/w in cutting in foundation of masonary work including lead upto 30 m. and lift upto 1.5 m and disposal and back filling as per direction of engineer-in-charge. 6 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as f7d, f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size, as per dsr2023 item no-10.11.1 7 providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge.fixing with adjustable lugs with split end tail to each jamb, as per dsr2023 item no-10.14.1.1 8 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes, as per dsr2023 itm no. 10.30.1 9 providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. (note: butt hinges and necessary screws shall be paid separately) 9.5.1second class teak wood , 35 mm thick shutters,as per dsr23 item no. 9.5.1.1 10 providing and fixing aluminium sliding door bolts, isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. size 300x16mm, as per dsr23 item no. 9.96.1 11 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. size200x10mm 12 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. size 125mm 13 providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the pre-laminated particle board as per direction of engineer-in-charge 14 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in: cement mortar 1:4 (1 cement: 4 coarse sand) 15 centering and shuttering including strutting, propping etc. and removal of form for: suspended floors, roofs, landings, balconies and access platform 16 r.c.c. work in beam , suspended floor , roofs having slope up to 15* landing ,balconies , shelves chhajjas , lintals , bands , plan window sills stair case and spiral staircasesabove plinth level up to floor v level , excluding the cost of centerring , shuttering , finishing and rainforcement with 1:1.5:3( 1 cement : 1.5 coarse sand (zone iii) deried from natural sourses :3 graded stone aggregad 20mm nominal size derived from natural sourses 17 steel reinforcement for rcc. work including straightening , cutting ,bending ,placingin position and binding all complete above plinth level . tmt bars of grade fe -500 dor more. 18 12 mm inner plastering with 1:4 cement mortar on brick work of wall including all cost of material. 19 p/applying water proof cement based putty on wall or celling over plaster surface to prepare even and smooth surface. complete in all respect 20 interior wall painting with plastic emultion paint of approved brand and manufacturer to give an even shade : two or more coat(1st quality (royal, silk) asian/berger). 21 finishingexternal wall with two or more coats of premium acrylic smooth exterior paint with silicone additives of required shade over and including priming coat of exterior primer to give an even shade after throughly brushing the surfaceincluding curing and cost all materials. 22 painting two coat of superior quality of synthetic enamel paint approved make on old wooden surface i/c cost of all material, labour, t&p etc. required for proper completion of work. 23 provoding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. pcc in 1:5:10( 1cement:5 course sand:10 graded stone grit size 40mm. 24 providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to is: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to is: 15477, in average 6 mm thickness, including grouting of joints (payment for grouting of joints to be made separately).size of tile 600x600 mm 25 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 26 providing and laying rectified glazed cermic floor tileof size 300x300 mm or more ( thickness to be specified by the manufacturer), of 1st quality conferming to is: 15622, of approved make, grey flume red brown, laidon 20 mm thick cement mortar 1:4 , jointing with greycement slurry @ 3.3 kg/sqm including pointing the joints white cementand matching pigment etc. complete 27 kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick 28 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15 mm nominal bore 29 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 ,15 mm nominal bore 30 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps 31 providing and fixing c.p. brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of engineer-in-charge. 32 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931. 15 mm nominal bore 33 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.concealed work, including cutting chases and making good the walls etc.15 mm dia 34 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.concealed work, including cutting chases and making good the walls etc.25 mm dia 35 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end):25 mm nominal bore 36 providing and fixing white vitreous china water closet scautting pan (indian type) along with s or p trap including dismantling of old wc seat and s or p trap at site complete with all operations including all necessary materials ,labour and disposal of dismantled material i/c malba ,all complete as per the direction of engineer-in charge. urisa pattern w.c panof size 580x440 mm 37 providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid 38 looking mirror with polish of 600x450 mm size with bevelled as per pwd sor ch 22 item 14 39 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank , is:12701 marked with cover and suteble locking arrangement and making nacessary holes for inlet, outlet and over flow pipe but without fittings and base support for tank . 40 p/f p.v.c. low lelel flushing cistern with manualy controled device (handle) lever conforming to is: 7231,with all fittings and fixtures complete 10 ltr. capicity , white . 41 c.p. brass towel ring jaqur essco ,sera hindware as per pwd sor ch 22 item 23 42 c.p. brass soap dish jaqur essco ,sera hindware as per pwd sor ch 22 item 24 43 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110 mm diameter 44 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. bend 87.5°,110 mm bend 45 c.p. brass shower havy quality jaquar essco, sera ,hind ware 100 mm dia as per pwd sor ch 21 item55 46 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : 15 mm nominal bore 47 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. rate as per dsr (e&m)ch 1 (1.1) 48 wiring for light /power plug with 4x4 sq. mm frlc pvc insulated copper conductor single core cable in surface / recessed steel conduit alongwith 2 nos 4 sq. mmfrlc pvc insulated copper conductor single core cable for loop earthing as required. 49 wiring for circuit/ submain wiring alongwith earth wire with the following size frlc pvc insulated copper conductor single core cablein surface / recessed steel conduit as required.2 x 1.5 sq. mm + 1 x 1.5 sq, mm earth wire 50 wiring for circuit/ submain wiring alongwith earth wire with the following size frlc pvc insulated copper conductor single core cablein surface / recessed steel conduit as required.2 x 2.5 sq. mm + 1 x 2.5 sq, mm earth wire 51 wiring for circuit/ submain wiring alongwith earth wire with the following size frlc pvc insulated copper conductor single core cablein surface / recessed steel conduit as required.2 x 4 sq. mm + 1 x 4 sq, mm earth wire 52 wiring for circuit/ submain wiring alongwith earth wire with the following size frlc pvc insulated copper conductor single core cablein surface / recessed steel conduit as required.2 x 6 sq. mm + 1 x 6 sq, mm earth wire 53 providing and fixing following capacity tp&n disconnector fuse swtich unit inside the existing pannel board with isi mark hrc fuses including drilling hole incubicle panel, making connection etc. as required.32 a tp&n 54 providing and fixing following capacity tp&n disconnector fuse swtich unit inside the existing pannel board with isi mark hrc fuses including drilling hole incubicle panel, making connection etc. as required.63 a tp&n 55 providing and fixing following capacity tp&n disconnector fuse swtich unit inside the existing pannel board with isi mark hrc fuses including drilling hole incubicle panel, making connection etc. as required.100 a tp&n 56 providing and fixing following rating and breaking capacity and pole mccb with thermomagnatic release and terminal spreadersin existing cubicle pannel board including drilling hole in cubicle panel, making connection etc. as required. 100 a 16 ka, tpmccb 57 supplying and fixing following way, single pole and nutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, nutral bar, earthing bar, din bar, interconnection, powder painted including earthing etc. as required.( but without mcb/ rcc/,isolator) 8 way double door 58 earthing with copper earth plate 600 mm x 600 mm x 3mm thick including accessories, and provinding masonry encloser with cover plate having locking arrangement and watering pipev of 2.7 mtr long etc.with charcoal/ coke and salt as required. 59 s/f of led tube light fitting suitable for 1x20 wattcomplete including led tube light fitting etc.complete in all respect of philips/ bajaj/ next. or crompton make as per p.w.d. electrical schedule item no. 453 cat aa(seg) 60 supply, installation, testing and commissioning of 1200 mm sweep. bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulaton: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (cm/m/w) minimum 6.00, air delivery minimum 210 cum/min, 350 rpm (tolerance as per is: 374-2019). thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz. single phase ac supply, earthing etc. complete as required. 61 pannel description:-supply and fixing and steam cured prestressed concreate of grade m25 or richer mix (pretensionedwith 4 nos. 4mmhts wire) slab of size 2100mmx300mmx50m with provision for hole (if required ) for fixing of angle at the top and fixing the same atproper position in between the two pillers .at the toe and the fixing the same at proper position in between the two pillers .piller desscription :- s/f in position of steam cured prestressed concreate of grade or richer mix (pretensiond with 7no 4 mm hts wire) piller of cross (6x6 ) and both edges grooves (2x2) for holding precost slabs / pannel . hight of wall 8 feet , it wil be 6 feet above the ground and 2 feet bellow ground level anterust concertina wire (zal:- aluminium and powdder coted ) concertina wire fencing of material g.i. or zal wire dia 2.60mm , coil dia 400 mm with 2500 gsm zink coating with blade profile bto-22 and cbt -6 i/c ssupporting angle arrangement per fixing ofconcertina wire. 62 pcc in 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources 63 supply and laying of local river sand as filter material 64 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in- charge.16.91.2 80 mm thick c.c. paver block of m-35 grade with approved colour design and pattern. 65 taking outroots of trees of above 0.15m and 0.30m. dia by manual 66 cleaning thick jungle and uprooting behaya & disposel beyond 100 mts. 67 earth work by power transport for a lead of upto 1 km including excavation ,loading, unloading, royalty, manual compactio and dressing i/c all lift rates shall be applicable for lead beyond 630 mtr and upto 1 km. as per idsor ch.- v item no. 25 68 supplying and fixing main steel gate of 4.00x2.00 (2x2.00x2.00 m) & side steel gate of 1.50x2.00 (1x1.50x2.00 m) on square pipe frame 40x40x5mm filling with70x2 mm square pipe with one coat of red oxide primer & painting with synthetic enamel paint of approved brand and manufacture to give an even shade.(all work done as pardirection of engineer-in- charge) including cost of all material, labour t&p etc . 69 providing& fixing of isi marked new india mark ll hand pump with 1.5hp submercible pumpi/c all cost of material , labour t&p etc. all work done as per u.p jalnigam(rural) norms. 70 providing& fixing 5kw off grid solar system i/c all cost of material , labour t&p etc. all work done as per u.p neda norms. 71 providing and fixing kitchen sink stanless steel isi 304 (18/8)with c.i. brackets ,cp. brass chain with rubber plug, 40 mm cp. brass waste complete , including painting the fittings and brackets ,cutting and making good the walls wherever requried . (510x1040)mm bowl depth 250 mm