tender for revenue works and special repair works including e/m works at shillong under ge shillong; 1 dismantling of plain or corrugated steel sheeting, any gauge, thickness including any pattern roof coverings complete all as specified and as directed. 2 dismantling timber scantlings in unframed works, 40 sqcm and over in section, in any position 3 taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and as directed 4 taking down old defective chowkhats with shutter (without taking off shutters from the frame) n.exc 1.5 sq.m eachand removing away from site, complete all as specified and as directed. 5 demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and complete all as specified and as directed. 6 dismantling of wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including cover fillets of any description including all snap grids and hanging arrangements complete all as specified. 7 dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises 8 taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified. 9 taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified. 10 m & l for structural timbers of group b, first or second choice as per is 3629: 1986, wrought in scantlings and timber fixed complete all as specified and as directed. 11 m & l except timber for structural timbers of group b, first or second choice as per is 3629: 1986, wrought in scantlings and timber fixed complete all as specified and as directed. 12 m & l for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of creosote complete all as specified and as directed. 13 m & l for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to is 15965:2012 of durability class 3, atmospheric classification category 3, coating class az150, 0.50 mm thick, of an approved colour and having yield strength of 550 mpa as in roof covering/ wall clading fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed. 14 m & l for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per is 15965:2012 of durability class 3, atmospheric classification category 3, coating class az150, 0.50 mm thick, of an approved colour and having yield strength of 550 mpa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed. 15 s & f hot rolled medium and high tensile structural steel (fe-290 of grade 165 conforming to is 2062: 2011) as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. 16 s & f flush door shutters, 30 mm thick, solid core of block boards construction, mr grade, commercial type with stiles, rails and lipping of timber as given in group 2a and group 2b of annex b of is 2202 (part 1): 1999, both sides face panels of plywood as per is 710: 2010, internally lipped complete all as specified and as directed. 17 s&f 35mm thick, 2nd class hard wood, glazed andskeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified inssr part i, section 8, clause 8.24(a); supplied and fitted to chowkatscomplete all as specified and as directed. 18 s & f stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. 19 supply and fixing fiber glass reinforced plastic (frp) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. the laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides. m.s. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as directed. 20 supply and fixing to existing door frames 30 mm thick glass fibre reinforced plastic (frp) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick frp laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick frp laminate for panels conforming to is: 14856, including fixing to frames, complete as specified by the manufacturer and as directed. 21 s&f of solid pvc wall lining consisting of 15/16mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame complete all as specified and directed. 22 s&f of solid pvc wall lining consisting of 12mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame complete all as specified and directed. 23 s & f 1 mm thick, type s (standard type), wear index no. 3, impact index no. 2, scratch index no. 3, one side decorative, laminate as per is 2046: 1995 of surfaces finish, colour and pattern as per approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed by engineer-in-charge. 24 s & f brass barrel tower bolts with barrel of extruded sections of brass and rolled or down brass, 150 mm long, bright finish complete all as specified and as directed. 25 s & f brass barrel tower bolts with barrel of extruded sections of brass and rolled or down brass, 100 mm long, bright finish complete all as specified and as directed. 26 s & f brass alloy handle, fabricated type, 150 mm size, nickel chromium plated finish as per service grade number 4 of is 1068: 1993 complete all as specified and as directed. 27 s & f brass alloy handle, fabricated type, 100 mm size, nickel chromium plated finish as per service grade number 2 of is 1068: 1993 complete all as specified and as directed. 28 s & f 100mm butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type b-11 complete all as specified and as directed. 29 s & f 50 mm medium weight mild steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per is 1341: 1992 complete all as specified and as directed. 30 m & l for powder coated (colour) aluminium frame for doors, windows, ventilators (thickness of powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing including handle, tower bolt, door stopper, grills etc. complete all as specified and as directed. note:- design/ pattern, profile sizes and other dimensions shall be of standard size and as directed. 31 m & l for powder quoted (colour) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed. note:- design/ pattern, profile sizes and other dimensions shall be of standard size and as directed. 32 m & l for powder coated anodised aluminium window andventilator shutters, side hung typewithout sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type b-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified and directed. 33 supply & fix sheet glass, ordinary quality, 4.8 mm thick and glazed with oil putty or fixed with beads in square exceeding 0.5 sqm in each pane complete all as specified and directed. 34 supply & fix sheet glass, ordinary quality, ground or obscured or frosted, 4.8 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed. 35 m & l for precast cement concrete solid block masonry of grade c(5.0) with concrete m 10 (nominal mix) using 20 mm nominal size graded crushed stone aggregate exceeding 10 cm in width and set in cement mortar (1:6) complete all as specified and as directed. 36 m & l for precast cement concrete solid block or slab 10 cm thick (with plain or interlocking joint as directed) as per is 2185 (part-1): 2005, masonry of grade c(5.0) with concrete m10 (nominal mix) using 20 mm nominal size graded crushed stone aggregate, and set in cement mortar (1:4) complete all as specified and as 37 m&l for non skidjoint free coloured ceramic tiles 7 to 8 mm thick (square or rectangular),area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile, laid over and including screed bed or bedding layer of mortar, 15 mm thick, in cm 1:6, complete all as specified and as directed by engineer-in-charge at site. 38 m&l for glazed ceramic tiles on vertical surface of size 450x 350x 7-8mm or 300x200x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of the tiles laid over and including 10mm thick rendering as backing coatin cm 1:4 with wire markings to receive tile over it, complete all as specified and as directed. 39 m&l for dark shade vitrified ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tile, laid over and including 20mm thick screed bed in cm 1:6, complete all as specified and as directed by engineer-in-charge at site. 40 m & l for 16- 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 41 taking down cement plaster, any description, on brick or stone walls, etc.including racking out joints, hacking for key, scrubbing down with water, etc. including removal of rubbish material away from site, complete all as specified and as directed. 42 material and labour for plastering 15 mm thick (in two layers of 10mm and 5mm thk) on fair faces of brick wall or concrete surfacesin cement mortar 1:4 with water proofing compound as per manufacturers printed instruction finished even and fair complete all as specified and directed. note: water proofing compound shall be measured and paid for separately. 43 supply only integral water proofing compound complete all as specified and directed. 44 material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and fair complete all as specified and as directed. 45 s&f of gl frame work for seamless ceiling of grid size 605x605mm comprising of gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. 46 m&l for seamless calcium silicate ceiling made of 1800x1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, incl finishing the joint of face board with specially formalated jointing compound and 48 mm wide fibre tape to provide seamless finish fixed with screws to gl or aluminium frame work incl two coats of putty and two coats of obd design incl gl frame for seamless ceiling comprising of gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with gl cleat and steel expansion fasterners with and incl ceiling section (n exc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c and gl ire of 4mm suspendor complete all as specified and directed. 47 s & f in repair cast copper alloy, chromium plated fancy type, 15 mm bore angular stop valve with wall flange,screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed. 48 s & f in repairs 32 mm bore brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipes or connection including necessary packing, union and caps etc. complete all as specified and as directed. 49 s & f in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 50 s&f pvc swr nahani/ floor trap plain with grating including jointing with solvent cement, dia of outlet 75 mm, water seal minimum 50 mm, complete all as specified and directed. 51 s & f of pvc (swr) as per is 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, laid in trenches complete all as specified and directed. 52 s & f of pvc swr type b as per is 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 75 mm dia, laid in trenches complete all as specified and directed. 53 s & f of pvc bends without inspection door (any angle), 110 mm dia conforming to is 14735: 1999 complete all as specified and directed. 54 s & f of pvc bends without inspection door (any angle), 75 mm dia conforming to is 14735: 1999 complete all as specified and directed. 55 s&f stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 50mm dia bore of pipe complete all as specified and directed. 56 m & l in repairs for pvc connections 15 mm size with ptmt nuts of length 450 mm complete all as specified and as directed. 57 supplying & fixing to walls and ceilings or laid in floors 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to is 1239 (part-1): 2004 including all fittings conforming to is 1239 (part-2): 2011 complete all as specified and as directed. 58 supplying & fixing to walls and ceilings or laid in floors 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to is 1239 (part-1): 2004 including all fittings conforming to is 1239 (part-2): 2011 complete all as specified and as directed. 59 cutting chases in stone, concrete block walls & slabs to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., not exceeding 10 cm girth and making good the same with cement concrete m15 (nominal mix) using 12.5 mm nominal size coarse aggregate or cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 complete all as specified and as directed. 60 s&f in repair rotational moulded polyethylene water storage tank 1000 litre capacity of triple layered layer wall construction (cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule all as specified and as directed. 61 s & f in repairs 20 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete 62 material & labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1 mm thick wall care putty complete all as directed 63 m&l for preparation of new surfaces and applying two coats of 100% premium acrylic emulsion paint havingvoc less tham 50 gm/ltrs and uv resistance as per is 15489:2004, alkali and fungal resistanxe dirt resistance exterior paint of required shade with silicon additives @1.43 ltrs/10sqm over and including priming coat of exterior primer applied @0.90 ltrs/10 sqm over new surfaces complete all as specified and directed. 64 m&l for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint havingvoc less tham 50 gm/ltrs and uv resistance as per is 15489:2004, alkali and fungal resistanxe dirt resistance exterior paint of required shade with silicon additives @1.43 ltrs/10sqm over and including priming coat of exterior primer applied @0.90 ltrs/10 sqm over new surfaces complete all as specified and directed. 65 material & labour for complete removal of existing treatment of wall and applying two coats of oil bound distemper over 1 mm thick wall care putty complete all as specified and directed. 66 preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. 67 s & f double bowl kitchen sink made of stainless steel 1 mm thick sheet kitchen or laboratory with plugs, washers and 40 mm nominal size, copper alloy, nickel chromium plated finish waste fittings with including silicone sealant; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipes overall size 990 mm x 420 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed. 68 s & f 15 mm nominal size, nonrising spindle type fancy wall mounting combination as per is 8931: 1993, cast copper alloy body with knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. 69 s & f in repairs vitreous china semi pedestal pattern(anglo-indian type), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by engineer-in-charge. 70 s & f in repairs thermoplastic seats and covers of grade 2 type for anglo indian wc, recessed with hinging device of bronze or brass with nickel chromium plating complete all as specified and as directed. 71 s & f 10 litres cap pvc, valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with 32mm dia pvc pipe 600 mm long complete all as specified and directed 72 s & f in repair vitreous china counter type wash hand basin, ovel shape size 450 mm x 300 mm including brackets including32 mm pvc waste coupling andpvc waste pipe 32mm bore complete all as specified and as directed. 73 s & f of 15 mm dia brass cp centre hole wall mixer fancy type 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 74 s & f in repair of mild steel brass chromium plated health faucet (abs body) for 15mm bore pipe and 1.25m long and flexible tube and abs wall hook including making connection and fixed in position complete all as speified and directed. 75 s & f in repairs sheet glass shelf assembly consisting of 5.50 mm thick glass sheet shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. 76 s&f in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed. 77 s & f in repairs brass chromium plated tubular towel rail, 20 mm dia, d type, 60 cm long between flanges complete all as specified and as directed. 78 s & f hand shower 150 mm square shape, single flow (abs body chrome plated with grey face plate) with rubit cleaning system including easy flex tube in chrome finish 1.5 metre long with nuts system complete all as specified and as directed. 79 demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) and in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. 80 m & l for rcc m15 (nominal mix) using 20 mm nominal size graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 81 m & l for mild steel tmt bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height complete all as specified and as directed. 82 m & l for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed. 83 excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed. 84 m & l for cement concrete in foundation, filling and mass concrete in m10 (nominal mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 85 s & f hot rolled medium and high tensile structural steel of gradefe 410-w (gde e- 250)quality a conforming to is 2062: 2011 as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. 86 demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) and complete all as specified and as directed. 87 m & l for cement concrete m7.5 (nominal mix) using 40 mm nominal size graded crushed stone aggregate 75 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. 88 s & f hot rolled medium and high tensile structural steel of grade e165 as per is 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed. 89 m&ll for 5mm thick 3d designer type pvc insulation panels with eps stuck to 1mm with printed pvc sheet complete all as specified and directed. 90 m&l for 5 mm thick 3d designer type pvc insulation panels with eps stuck to 1mm with printed pvc sheet suitably placed in false ceiling grid made of gi frame work for seamless ceiling comprising of gi perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.90 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with 4 mm dia gi adjusting level fixed to roof slabs complete all as specified and directed 91 excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or water supply pipes lines etc or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed. 92 returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed. 93 removing excavated material (excluding hard rock) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. 94 m & l for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. 95 m&l for bricks, common burnt clay building bricks, sub- class b designation 75 complete all as specified and directed. 96 m & l for earthing complete with galvanised steel plate earth electrode 600 mm x 600 mm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate no. 3 of ssr part i (2009) including necessary concrete chamber in cement concrete m15 (nominal mix) using 20 mm nominal size coarse aggregate, precast rcc cover slab in cement concrete m15 (nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm x 40 cm x 5 cm reinforced with 8 mm dia tmt bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, gi funnel, gi wire mesh filter, 20 mm dia gi pipe medium grade for watering, 15 mm dia gi pipe light grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing including taking down old earthing complete all as specified and as directed. 97 m & l for 15 mm thick cement plaster on fair faces of bricks/ concrete surfaces in cement mortar 1:6 including plastered surfaces shall be finished even & smooth without using extra cement all as specified and as directed. 98 m&l for preparation of newly plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed. 99 m & l for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over alkali resistant primer complete all as specified and as directed. 100 s & f steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. 101 m & l for plain, galvanised, mild steel sheeting with grade of zinc coating 275, 1.00 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and as directed. 102 supply & fix sheet glass, ordinary quality, 3 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed. 103 m & l 75 mm thick plain cement concrete m10(nominal mix) using 40 mm nominal size graded stone aggregates finished surface even and fair as in plinth protection all as specified and as directed. 104 m&l for granolithic concrete 1:1:2 floor topping 30mm thick; laid over cement concrete subfloors etc. and finished to an even and fair surface complete all as specified and directed. 105 m & l for precast cement concrete solid block masonry of grade c(5.0) with concrete m15 (nominal mix), as per is 2185 (part-1):2005, using 20 mm nominal size graded crushed stone aggregate exceeding 10 cm in width and set in cement mortar (1:6) complete all as specified and as directed. 106 dismantling wooden boarding, any description, fixed in any position with nails complete all as specified and as directed. 107 m & l for cement concrete m15 (nominal mix) using 20 mm nominal size graded crushed stone aggregate as in floor 25 mm thick finished even and fair complete all as specified and directed. 108 m&l for non skidjoint free coloured ceramic tiles 7 to 8 mm thick (square or rectangular),area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile, laid over and including screed bed or bedding layer of mortar, 15 mm thick, in cm 1:6, complete all as specified and as directed. 109 m&l for non skidjoint free coloured ceramic tiles 7 to 8 mm thick (square or rectangular),area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface such as skirting, dados, risers to steps, etc.,setand jointed in neat cement slurry and pointed in white or colour cement to match colour of tile, laid over and including 10mm thick rendering as backing coatin cm 1:3 with wire markings to receive tile over it, complete all as specified and as directed. 110 m & l for hardcore (broken stone or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. 111 m & l for cement concrete m7.5 (nominal mix) using 40 mm nominal size graded crushed stone aggregate 100 mm thick in sub base for laying tiles, pavings, floorings etc. all as specified and as directed. 112 m & l for preparation of old surface of wall and applying one coat of oil bound distemper with roller complete all as specified and as directed. 113 m&l for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tintedcomplete all as specified and as directed. 114 surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed. 115 m & l for treating the bottom and sides of excavation at the rate of 5 litres of chemical emulsion in water of one percent chlorpyrifos 20 ec for per square metre of surface area complete all as specified and as directed. 116 m & l for treating the soil under plinth protection at the rate of 5 litres of chemical emulsion in water of one percent chlorpyrifos 20 ec for per square metre of surface area complete all as specified and as directed. 117 m & l for cement concrete in foundation, filling and mass concrete in m7.5(nominal mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 118 m & l for brick work with fly ash bricks of class designation 7.5 as per is 12894: 2002, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. 119 m & l for 40 mm thick damp proof course in cement concrete m15(nominal mix) using 12.5 mm nominal size graded crushed stone aggregatecomplete all as specified and directed. 120 material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. 121 m&l for non skidjoint free coloured ceramic tiles 7 to 8 mm thick (square or rectangular),area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile, laid over and including screed bed or bedding layer of mortar, 15 mm thick, in cm 1:6, complete all as specified and as directed. 122 m & l for rcc m25 (design mix) using 20 mm nominal size graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. 123 m & l for rcc m25 (design mix) using 20 mm nominal size graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed. 124 m & l for rcc m25 (design mix) using 20 mm nominal size graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed. 125 m & l for rcc m25 (design mix) using 20 mm nominal size graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 126 m & l for rcc m25 (design mix) using 20 mm nominal size graded crushed stone aggregate as in chajjas complete all as specified and as directed. 127 m & l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished flat surfaces of concrete complete all as specified and as directed. 128 m & l for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed. 129 m & l for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and as directed. 130 m & l for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and as directed. 131 m & l for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of rcc/ pcc bands in walls, horizontal or sloping and similar work exceeding 10 cm but not exceeding 20 cm wide for rough finished surfaces of concrete complete all as specified and as directed. 132 m & l for mild steel tmt bars 6 mm to 8 mm dia, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. complete all as specified and as directed. 133 m & l for mild steel tmt bars 5 mm dia and over, upto and including 10mm dia as in stirrups, spaces and binders bent to shape as required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed. 134 s & f 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and as directed. 135 s & f vitreous china counter type wash hand basin, ovel shape size 550 mm x 400 mm including brackets including32 mm pvc waste coupling andpvc waste pipe 32mm bore complete all as specified and as directed. 136 s&f vitreous china wash down water closet pan (pedestal pattern) with p or s trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device including 10 litre capacity pvc flushing cistern and making good disturbed surface of floor, complete all as specified and as directed. 137 s & f of mild steel brass chromium plated health faucet (abs body) for 15mm bore pipe and 1.25m long and flexible tube and abs wall hook including making connection and fixed in position complete all as speified and directed. 138 s&f pvc connections of length 450mm, 15 mm size with ptmt nuts complete all as specified and as directed. 139 s & f 15 mm nominal size, screw down stop valves/ angle cock, cast copper alloy body and body components with crutch handle, bright finished complete all as specified and as directed. 140 s & f 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 141 s & f sheet glass shelf assembly consisting of 5.50 mm thick glass sheet shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. 142 m&l for 20mm thick granite (of any type), work in cooking platform, in toilets for fixing wash hand basin, counter slab (table rubbed and polished), in steps, jambs, pillars, window cills and like, fixed in cement mortar 1:4 including pointing in white cement 1:2 using granite / marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick cement screed in cm 1:4, complete all as specified and as directed. 143 s & f brass chromium plated tubular towel rail, 20 mm dia, d type, 60 cm long between flanges complete all as specified and as directed. 144 s & f upvc tee(87.5⁰) single, 75 mm dia without inspection door conforming to is 14735: 1999 complete all as specified and directed. 145 s & f pvc tee(87.5⁰) single, 110 mm dia without inspection door conforming to is 14735: 1999 complete all as specified and directed. 146 s & f in repair swr vent cowl, 75 mm dia conforming to is 14735: 1999 complete all as specified and directed. 147 m&l for preparing newly plastered surfaces of ceiling andapplying three coats of whitewash complete all as specified and as directed. 148 material & labour for rendering 15 mm thick in cement mortar 1:3 over rcc slab mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instruction complete all as specified and directed. note;- water proofing compound shall be measured and paid separately as supply only. 149 supply & providing water proofing treatment with polymeric standard water proofing membrane having 10 years guarantee for water tightness comprising with the following courses of treatment/specification from bottom to top: (i) preparation of rcc roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 kg/sqm over a coat of polymeric primer @ 0.30 kg/sqm including cleaning surface, all asper manufacturers specification complete all as specified and directed.(ii) supply & providing water proofing treatment with polymeric proofing membrane of 3kg/sqm hyperplas standard/multiplas standard consting of 100micron hmhdpe film centre core including coating the surface with the bitumen 85/25 @ 1.20 kg/sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends and cutting grooves in wall for inserting tar felt if required complete job as per requirement as required thereof, complete all as specified & directed. 150 supply only liquid water proofing compound complete all as specified and directed. 151 s & f 15mm bore bib taps chromium plated fancy type, cast opper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 152 s & f rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per is 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade gi pipe for connecting inlet, outlet, over flow and washout pipes, all as specified and as directed. 153 s & f of 20 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete all as specified and directed. 154 s & f ball valves high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams complete all as specified and as directed by the engineer-in-charge. 155 m & l for concrete bed to drain pipes of internal diameter 150 mm, in cement concrete m10(nominal mix) using 40 mm nominal size graded crushed stone aggregate including packing under and haunching against the sides of pipes complete all as specified and as directed. 156 supply and fixing of solid pvc door frames of size 50 mm x 47 mm made out of 5 mm thick plain colour pvc sheet reinforced with ms square tube all as per specification & drawing complete all as specified and directed. 157 s&f of factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. ms frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the ms frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. 158 s & f aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 200 mm long, anodized finish not be less than grade ac 10 of is 1868 : 1996 with transparent anodic film complete all as specified and as directed. 159 supply and fixing stainless steel butt hinges 100 mm long medium weight with steel pin, bright polished complete all as specified and as directed. 160 s & f cast aluminium alloy handle, cast type, 125 mm size, anodized to a bright natural, mat finish not be less than grade ac 10 of is 1868 : 1996 complete all as specified and as directed. 161 cutting openings, through brick walls built in cement mortar or cement lime mortar for door, window and other openings or enlarging existing openings and converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exceeding 50 m complete all as specified and as directed. 162 s & f brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. 163 s & f wall mixer 3-in-1 for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed. 164 m & l for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. 165 m&l for 18/19mm thick, block boardsgrade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in cup board shutters / shelves, partitions and pelmets etc, fixed with screw/nails including 4mm thick teak wood lipping complete all as specified and as directed. 166 s&f of 0.90mm thick decorative sunmika laminate type i, surface finish, colour and pattern as approved by ge complete all as specified and directed. 167 m & l for construction of soak well 1.20m dia and 3.00m effective depth as per drawing no. td/sz/504 sheet no. 1/1 including excavation in soft/ loose soil, removal of spoil to 50 metres, lean concrete in m10(nominal mix) using 40 mm nominal size graded crushed stone aggregate, rcc in m25(design mix) using 20 mm nominal size graded crushed stone aggregate, brick work in cement mortar (1:4), external plastering in 15 mm thick in cement mortar (1:4) in two coats of (10 mm + 5 mm) mixed with integral water proofing compound upto 15 cm below ground level, brick bat filling with 150 mm to 80 mm graded brick bats for filling the bottom layer and 80 mm to 40 mm graded brick bats for the top layer, precast concrete in m25(design mix) using 20 mm nominal size graded crushed stone aggregate, pvc vent pipe and cowl as pvc-u, type b as per is 13592: 2013 and upvc as per is 14735: 1999, tmt bars as specified, cast iron soil waste pipe as per is 1789: 2002 or is (3989: 1984, complete all as specified and as directed. 168 s & f on site lldpe septic tankconventional typedesigned to carry sewage and sullage water, excavation in any type of soil, pcc(1:4:8) below foundation, vent shaft, connection etc complete for 5 no of users, complete all as specified and directed. 169 taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. 170 taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. 171 m & l for point wiring for one light or one fan or one exhaust fan or bell point controlled by one switch complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 1.5 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including pvc casing caping of suitable size as required as required at site including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. 172 m & l for point wiring for one 3 pin/ 5 pin 5 amps socket outlet on the same board complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 1.5 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including pvc casing/capping of suitable size as required at site including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. 173 m & l for point wiring for one 3 pin/ 5 pin 6 amps socket outlet on independent board complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 1.5 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class pvc casing caping of suitable size as required at site including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. 174 m & l for capping casing point wiring for one 3 pin/ 5 pin 15 amps socket outlet on independent board complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 4 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class pvc casing/capping of suitable size as required at site including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 4 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. 175 m & l for point wiring for one 3 pin/ 5 pin 15 amps socket outlet on independent board complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 2.5 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class pvc casing caping of suitable size as required at site including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 2.5 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. 176 m & l for point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 1.5 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class pvc concealed conduit as per is 9537 (part-iii): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk type pressed steel / welded ms terminal boxes made out of 1.20mm ms sheet, 3mm thick modular top cover for mounting of modular fittings, switches, sockets, regulators etc suitable for fixing with 1.5 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.note:- cutting chases and making good in cm (1:3) are deemed to be included in quoted rate. 177 m & l for point wiring for one 3 pin/ 5 pin 5 amps socket outlet on independent board complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 1.5 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class pvc concealed conduit as per is 9537 (part-iii): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (note: cost of cutting chase and making good shall be included in the quoted rate.) 178 m & l for point wiring for one 3 pin/ 5 pin 5 amps socket outlet on the same board complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 1.5 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class pvc concealed conduit as per is 9537 (part-iii): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (note: cost of cutting chase and making good shall be included in the quoted rate.) 179 m & l for point wiring for one 3 pin/ 5 pin 15 amps socket outlet on independent board complete with and including single core pvc insulated, unsheathed flexible conductor fr-lsh cables 4 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class pvc conduit as per is 9537 (part-iii): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. isi marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 4 sqmm copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (note: cost of cutting chase and making good shall be included in the quoted rate.) 180 s & f modular switch, 1 way, 6 a, 1 module complete all as specified and as directed. 181 s & f modular switch, 1 way, 16 a, 1 module complete all as specified and as directed. 182 s & f (3 pin and 2 pin) combined modular socket outlets (isi marked), 6a, 2 modules, 240 v, ac, 50 hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without shutter, flush type, design b complete all as specified and as directed. 183 s & f (3 pin and 3 pin) with common earthing pins, combined modular socket outlets, 6a & 16a, 2 modules, 240 v, ac, 50 hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without shutter, flush type, design b complete all as specified and as directed. 184 supply and fixing led lights fitting 1x 20w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 185 s & f bayonet plastic lamp holder, 2 a, 250 v, ordinary, backplate, non-switched, unenclosed, without t marking, b22d complete all as specified and as directed. 186 s & f of 7 watt led lamp, b22, base colour temperature 6500k complete all as specified and as directed. 187 supply and fixingled light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v ac with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 188 s & f 10 watt led energy saving new generation bulk head luminaire with opal diffuser including lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. 189 s&f of building security light fittings 35 watts, minimum system lumen output 100 lumen/ watt, made up of pressure die cast housing with prismatic polycarbonate diffuser and individual led with secondary optic and ip 65 including 40mm dia gi pipe of suitable length with nuts, bolts and clamps complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. 190 s & f ceiling roses, 6a, 240 v, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of polyamide or hornbean complete all as specified and as directed. 191 supply and fix exhaust fan, plastic body ac single phase. 230v of size 250mm sweep with, blades, and frame and louvers including cutting/ enlargement of hole and giving proper finishing complete all as specified and directed. 192 s & f single door mcb distribution board of sheet metal enclosure, triple pole and neutral, 4 way with 200 amps rated bus bar, 415 volt, ip42 protection grade and fixed with ms hold fast and grouted in wall with m15 (nominal mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 193 s & f double door mcb distribution board of sheet metal enclosure, single pole and neutral, 12 way with 200 amps rated bus bar, 240 volt, ip42 protection grade and fixed with pvc plug and screws and grouted in wall with m15 (nominal mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 194 s & f in repair mccb, fixed thermal & fixed magnetic setting, 4 pole, 415 volts, 16 ka, 63 amp complete all as specified and as directed. 195 s & f in repair mcb dp, 40 a, 240 v complete all as specified and as directed. 196 s&f mcb, sp, 240 volts, 6-32 amps 10 ka, c curve, complete all as specified and as directed. 197 supply and fix sub main wiring complete with and including two nos single core pvc insulated, unsheathed flexible conductor fr-lsh cables 6 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through and including heavy mechanical stresses class and -5 temperature class pvc casing/capping of suitable size as required at site including all accessories and fixed on walls and 6 sqmm one no single core copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable for earthing and connected to common earth dolly complete all as specified and directed by engineer-in-charge. note - two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of casing/capping shall be measured and paid as one unit length. 198 supply, laying, jointing, testing and commissioning cross-linked polyethylene (xlpe) insulated cable for working voltages of 1100 v, pvc sheathed, armoured, 4 core, nominal cross sectional area of main conductor 16 sqmm, stranded aluminium conductor, isi marked as per is 7098(part-i): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through gi pipe laid under floors/roads, through concealed gi pipe along wall etc. complete all as specified and as directed. 199 m&l for switch piano (flush button type) single pole one way 5 amps complete all as specified and directed. 200 s & f switch socket combination with (3 pin and 2 pin) combined socket outlets, 6a, 240 v, ac, 50 hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without shutter, flush type, design b and switch, 6 a, single pole, one way, 240 v, ac, 50 hz, ordinary (ipxo), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design a complete all as specified and as directed. 201 s & f switch socket combination with (3 pin and 3 pin) having two earthing pins, combined socket outlets, 6a & 16a, 240 v, ac, 50 hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without shutter, flush type, design b and switch, 16 a, single pole, one way, 240 v, ac, 50 hz, ordinary (ipxo), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design a and neon indicator and fuse complete all as specified and as directed. 202 supply and fixing 18 w led light fitting wall mounted batten 4ft , extruded aluminium housing , enivromental friendly . heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt , 6000k including necessary connection complete all as specified and directed. 203 s & f in repair of vertical double door mcb distribution board of sheet metal enclosure, triple pole and neutral, 4 way with 200 amps rated bus bar, 415 volt, ip42 protection grade and fixed with ms hold fast and grouted in wall with m15 (nominal mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 204 s & f of double door mcb distribution board of sheet metal enclosure, single pole and neutral, 8 way with 200 amps rated bus bar, 240 volt, ip42 protection grade and fixed with pvc plug and screws and grouted in wall with m15 (nominal mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 205 s & f in repair mccb, fixed thermal & fixed magnetic setting, 4 pole, 415 volts, 16 ka, 100 amp complete all as specified and as directed. 206 s&f in repair mcb sp 6-32 amp c series 10ka 240 volts complete all as specified and as directed. 207 supply and fix concealed sub main wiring complete with and including two nos single core pvc insulated, unsheathed flexible conductor fr-lsh cables 6 sqmm as per is 694: 2010, isi marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class pvc conduit as per is 9537 (part-iii): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 6 sqmm one no single core copper conductor pvc insulated, unsheathed flexible multistranded copper conductor fr-lsh cable for earthing and connected to common earth dolly complete all as specified and directed by engineer-in-charge. note 1- two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of conduit shall be measured and paid as one unit length. note-2 cost of cutting chase and making good shall be included in the quoted rate. 208 supply and fixing led lights fitting 1x 20w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 209 supplying, installing, testing & commissioning, storage geyser vertical, five star rated, 25 litres capacity, abs plastic body material, stainless steel inner tank material, shock proof, auto cut, on-off indicator, thermoplastic body, corrosion free with safety valve, fusible plug, thermal cut out including fixing by grouting and fastener complete all as specified and as directed. 210 s&f of pvc connections heat resistance type 15 mm size with ptmt nuts of length 450 mm complete all as specified and as directed. 211 s & f angle stop valve of ptmt, any colour, high pressure, minimum weight 90 grams, screwed for steel tube for nominal size 15 mm complete all as specified and as directed. 212 supply, laying, jointing, testing and commissioning cross-linked polyethylene (xlpe) insulated cable for working voltages of 1100 v, pvc sheathed, armoured, 2 core, nominal cross sectional area of main conductor 6 sqmm, stranded aluminium conductor, isi marked as per is 7098(part-i): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through gi pipe laid under floors/roads, through concealed gi pipe along wall etc. complete all as specified and as directed. 213 supply & laying sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. note :- only punned down sand shall be measured. 214 excavating over areas not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed. 215 m & l for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. 216 m & l for walling (curved on plan to a mean radius exceeding 6 metre) of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:4) complete all as specified and as directed. 217 m & l for cement concrete m10 (nominal mix) using 20 mm nominal size coarse aggregate inroof kerbs or mud stops, rounded or chamfered on edges or slab staging for water tank or filling of chowkhats complete all as specified and as directed. 218 m & l for cement concrete m15 (nominal mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed. 219 extra over stone walling of lime or granite or trap stone for hammer dressing to face stones and dressing of face beds and joints with maximum depression of face from straight edge held against the dressed surface not exceeding 40 mm, of random rubble walling, uncoursed or brought upto course complete all as specified and directed. 220 m & l for flush pointing, to random or pollygonal rubble, uncrushed or brought upto courses in cement mortar 1:3 complete all as specified and as directed. 221 m & l for cement concrete m10 (nominal mix) using 40 mm nominal size graded crushed stone aggregate 100 mm thick in sub base for laying tiles, pavings etc. complete all as specified and as directed. 222 preparation of newly plastered surfaces on walls and applying two coats of white wash complete all as specified and as directed. 223 providing and laying 80 mm thick factory made cement concrete interlocking paver block of m40 grade conforming to is 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape with grey cement and no pigment complete all as specified and directed. 224 excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed. 225 m & l for cement concrete in foundation, filling and mass concrete in m15(nominal mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 226 s & f for steel work of grade-3 as per is 10748 in tubular trusses including special shaped washer etc. complete using erw or hriw welded tubes conforming to is 1161: 2014 (yst 240 grade) complete all as specified and directed. 227 cutting hole of area not exceeding 150 sqcm into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete m15 (nominal mix) using 12.5 mm nominal size coarse aggregate complete all as specified and as directed. 228 demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. 229 taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed. 230 m & l for precast cement concrete solid block masonry of grade c(5.0) with concrete m7.5 (nominal mix) using 20 mm nominal size graded crushed stone aggregate exceeding 10 cm in width and set in cement mortar (1:4) complete all as specified and as directed. 231 material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 finished even and fair complete all as specified and as directed. 232 material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and fair complete all as specified and as directed. 233 material and labour for plastering 10 mm thick on the other side of lathing (on vertical surfaces) in cement mortar 1:4 finished even and fair complete all as specified and as directed. 234 m & l for cement concrete m15 (nominal mix) using 40 mm nominal size graded crushed stone aggregate 100 mm thick in flooring finished even and smooth without using extra cement complete all as specified and as directed. 235 m & l for cement concrete in surface channels and drains in m10(nominal mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 236 m & l for cement concrete m15 (nominal mix) using 12.5 mm nominal size coarse aggregate in copping of electric poles or roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. 237 m & l for preparation of old surface of walls including filling with white cement to make the surface smooth and applying two coats of oil bound distemper with auto roller to make the surface smooth complete all as specified and as directed 238 m & l for preparation of newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and as directed 239 m & l forpreparation of old treated plastered surfaces of wall and applying two coats of cement base paint using auto roller for making the surface uniform complete all as specified and as directed. 240 m & l for preparation of new plaster surface of wall and applying two coats of cement base paint complete all as specified and as directed. 241 m & l for neeru finish to plastering complete all as specified and as directed. 242 supply, installation, testing and commissioning of hydro cyclone separator capacity: 200000lph(200m3/hr), max working pressure 14 kg/cm2, working temperature 0-40 degree celcius, mild steel material, connection din flange(as per site requirement) inlet and outlet gasket, drain connection with ball valve, inspection window, air release valve, manual drain, pressure gauge, pressure drop 0.22 to 0.45 kg/cm2 at rated flow, separation efficiency 98% of by weight of 200 mesh (74 micron) or larger sand, grit and other solids heavier than the water including necessary stand, anchor plate, fasteners, fittings and making connections in existing pipelines complete all as specified and directed 243 supply and fixing water flow meter (analogue type) suitable for pipeline 350 mm dia including cutting and making good in existing pipe line etc complete all as specified and directed 244 supply and fixing water flow meter (analogue type) suitable for pipeline 200 mm dia including cutting and making good in existing pipe line etc complete all as specified and directed