tender for annual plan-pro.no.94/25-26-maintenance of anganwadi number 92 in ward15-general civil work - maintenance 2 15.19:dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of engineer -in-charge. 3 2.9.1:excavation work by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.ordinary rock 4 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) 5 10.1:structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 6 10.16.2:steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished seamless type tubes 7 od214362/2025-2026:supplying and fixing 150mm dia pvc rain water gutter semi circular section including fitting with 32mx5m ms flat supporters at 1m interval etc. complete 8 od229678/2025-2026:providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (modified 51.20) 9 12.51.2:providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :flashings / aprons (upto 600 mm) 10 50.18.9.19.2:providing and fixing pvc pipes including fixing the pipe with clamps/clips at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 110 m dia 4 kgf/cm2 - external work - exposed on wall 11 50.18.9.22.4:providing and fixing pvc moulded fittings/ accessories for rigid pvc pipes, including jointing with pvc solvent cement- 110 mm dia bend 12 18.48:providing and placing on terrace (at all floor levels) polyethylene water storage tank :isi 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 13 50.2.3.1:pumping or bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete 14 od230710/2025-2026:labour engaged for cleaning work 15 13.99.1:painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :one or more coats on old work