tender for arrangement of fire fighting works at lokbandhu rajnarayan combined hospital lucknow (u.p.) - fire pump room & external works 3 fire pumps - electricalsupplying, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : 4 (a) horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(b) suitable hp squirrel cage induction motor, tefc, synchronous speed 1500 rpm, suitable for operation on 415 volts, 3 phase 50 hz, ac supply with ip 55 protection for enclosure, horizontal foot mounted type with class-f insulation, conforming to is-325.(c) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 88 m head 5 jockey pump:-supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (jockey pump) 6 horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is : 1520. 7 suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class-f insulation, conforming to is : 325. m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. suitable cement concrete foundation duly plastered and with anti vibration pads. 8 180 lpm at 88 m head 9 providing & fixing of pressure switch in m.s. pipe line including connection etc. as required. 10 providing & fixing of anti vibration expansion bellow at pump inlet and outlet etc. as required. 11 150 mm dia. 12 100 mm dia. 13 80 mm dia. 14 providing and fixing in position the industrial type pressuregauges with gun metal / brass valves complete as required 15 supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required : 16 200 mm dia. 17 150 mm dia. 18 100 mm dia. 19 80 mm dia. 20 providing, installation, testing and commissioning of non-return valve of following sizes confirming to is: 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required : 21 200 mm dia. 22 150 mm dia. 23 100 mm dia. 24 80 mm dia. 25 providing, installation, testing and commissioning of stainless steel y-strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 26 200 mm dia. 27 providing laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 28 150 mm dia. 29 100 mm dia. 30 80 mm dia. 31 providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 3589/is 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (pump room works) 32 80 mm nominal bore 33 100 mm nominal bore 34 150 mm nominal bore 35 200 mm dia (wall thickness 6.3 mm) 36 providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 37 150mm dia 38 supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia ms pipe connection conforming to is 904as required : 39 2 way - 100 mm dia m.s. pipe (siamese connection) 40 4 way - 150 mm dia m.s. pipe 41 sub head-ii: internal fire fighting works 42 supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in allrespects, as required: (terrace pump) 43 (a) horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to is : 1520 44 b) suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class-f insulation, conforming to is-325. 45 (c) m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. 46 (d) suitable cement concrete foundation duly plastered and with anti vibration pads. 47 450 lpm at 35 m head 48 providing & fixing of pressure switch in m.s. pipe line including connection etc. as required. (for terrace booster pump) 49 providing & fixing of gun metal fire brigade suction hose coupling 150 mm (draout connection) with nut bolt for female coupling as per is902/1992. 50 providing and fixing in position the industrial type pressuregauges with gun metal / brass valves complete as required (for terrace booster pump) 51 supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required : 52 150 mm dia. 53 providing, installation, testing and commissioning of non-return valve of following sizes confirming to is: 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required : 54 150 mm dia. 55 providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 3589/is 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 56 80 mm nominal bore 57 150 mm nominal bore 58 providingandfixing ball valve 25mm dia 59 supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 60 providing and fixing cast iron air release valve of 25mm dia including 25 mm dia ball valve with fittings etc as per the requirement. 61 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 62 providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : 63 pendenttype sprinkler 64 upright sprinkler 65 horizontal side wall sprinkler 66 providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish ul listed or fm approved complete as required. 67 supplying, installation, testing & commissioning of sprinkler flexible pipe (ul listed) of stainless steel complete with 15 npt on reducer thread with maximum working pressure of 175 psi test pressure of 875 psi (burst) with branch line (inlet) 25mm npt male thread to sprinkler head (outlet) 15mm npt female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 68 length upto 1000 mm 69 length upto 1200 mm 70 providing, laying, testing & commissioning of c class heavy duty ms pipe conforming to is 3589/is 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 71 150 mm nominal bore 72 100 mm nominal bore 73 80 mm nominal bore 74 65 mm nominal bore 75 50 mm nominal bore 76 40 mm nominal bore 77 32 mm nominal bore 78 25 mm nominal bore 79 providing & fixing flow switch in following sizes m.s. pipe including connection etc as required. 80 150mm dia 81 supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required : 82 150 mm dia. 83 50 mm dia. 84 supplying, installation, testing & commissioning of test and drain valve assembly, including accessories such as test valve, unions, sight glass & drain valve for 50mm pipes size complete as required. 85 supplying, installation, testing and commissioning of annunciation panel made out of not less 1.6 mm thick crca sheet powder coated in approved colour with locking arrangement,audio and visual indicationof fault and operation of automatic sprinkler, system monitoring including providing and fixing the following, connections interconnections etc. complete as required. the panel shall be micro processor type/solid state type.a) monitoring nos. of flow switches. b) monitoring the open circuit, short circuit & earth fault in control cable between panel and flow switches. c) battery charger trickle cum boost to take complete load of annunciation panel complete with indication of low battery voltage, mains failure and other accessories including providing and fixing of 2 nos. 12 volts 24 ah each sealed maintenance free batteries. d) audible alarm 86 sub head-iv: signages 87 supply, installation, testing & commissioning of single/double sided signage with 20mtr. viewing distance with built in led, high efficiency l80 led with 50,000 hour life, usage: exit signage cum emergency light with function useeitherasanemergency luminaire or exit sign,with standalone testingsystem, housing of polycarbonate, glow wire test : 850°c, ral9003,type of mounting: wall or ceiling, operation mode non -maintained or maintained mode selectable, connectionvoltage 230v +/- 5%[220v-240v], compliant with en standards, with iec cb test certificate led, built in battery: ni-cd, duration 3 hours,viewing distance 2+a300m, dimensions in mm: 270 x 119 x 49. 88 fire fighting panel 89 fabrication, supply, insallation testing & commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required : 90 incoming 91 250a, 25ka 4 pole mccb, ics=100% icu rating digital voltmeter 0 500v with selector switch digital ammeter (0-400 a) with selector swtich & cts etc.led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 500a 92 outgoing( note : all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps) 93 main fire pump200 a, 25ka tpn mccb, ics=100% icu, with fully automatic star/delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation. 94 jockey pump100 a, 10ka tpn mccb, ics=100% icu, with suitable hp fully automatic star/delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation. 95 system controllerdesigning, supply, installation, testing and commissioning of system controller to control operation of main electric fire pump, jockey pump in sequence as per specification consisting of relays, timers. sensors, annunciation window for fault indication, complete as per specification 96 fabricating & supply, installing, testing and commissioning ofsheet steel clad floor mounting control panel having suitable size for control of 1 nos. booster pumps 5.5 kw/7.5hp each having suitable incoming mccb, incoming voltmeter with selector switch and fuses. dol starter with hand reset overload cum single phase preventor type relay, ammeters to read current in any one phase, alarm with reset push button which will automatically reset for the next cycle.(as per the technical specifications)(at terrace floor) 97 supply, installation , testing & commissioning of xlpe insulated and pvc outer sheathed aluminium conductor armoured cable of 1.1 kv grade confirming to is : 7098:1988 (with upto date amendments) of following sizes. 98 3-1/2 core, x 35 sqmm. 99 4 core, x 16 sqmm. 100 4 core, x 10 sqmm. 101 supplying and making end termination with brass compression gland & al.lugs for following sizes of pvc insulated, pvc sheathed/ xlpe al.conductor cables of 1.1 kv grade as required. 102 3-1/2 core, x 35 sqmm. 103 4 core, x 16 sqmm. 104 4 core, x 10 sqmm. 105 supply and fixing in position 1 m wide insulation mat made of elastomeric polymers material (class -a) of 415v grade as peris 15642-2006 .thickness of insulation mat shall be not less than 2 mmto withstand 1.1 kv dielectric strength as per is 15652 : 2006. it should be complete as per specifications & directions of engineer-in-charge.it should be complete as per specifications & directions of engineer-in-charge. 106 supplying and installing following size of perforated pre-painted m.s.cabletrayswithperforationnotmorethan17.5%,in convenient sections, joined with connectors, suspended from the ceiling with m.s. suspenders including bolts & nuts, painting suspenders etc as required. 107 150 mm width x 50mm depth x 1.6 mm thickness. 108 sub head-vi: miscellaneous works 109 providing & laying pipe of required dia including cutting the road & surface dressing complete in all respect as directed by engineer-in-charge. 110 costofminorrepair/repaintingornecessary works after installation of fire figting works 111 making holes with core cutting as per specified dia&depthincludingstackingofdismantled materials as directed by engineer-in-charge with in a distance of 60 meters. 112 25 mm dia (9) 113 32 mm dia (9) 114 50 mm dia (9) 115 80 mm dia (9) 116 100 mm dia (9) 117 150 mm dia (9) 118 grountingofholeswithplaster&paintingwith matchingcolorasperspecifieddia&depth including cost of materials complete in all respects as directed by engineer-in-charge. 119 25 mm dia 120 32 mm dia 121 50 mm dia 122 80 mm dia 123 100 mm dia 124 150 mm dia 125 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 126 supply and laying of 25mm x 5mm g.i strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of brass nut bolt and spring washer spaced at 50 mm) 127 dismantling aluminium/ gypsum partitions, doors, windows,fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in so meters lead as directed by engineer-in-charge. [total qty of false ceiling on g.f and f.f 7500 sq mt ] 128 providing and fixing false ceiling withwith 15 mm thick tegular/butt edged without perforation plain/designer light weight calciumsilicate anti-microbial bio-safe coated false ceiling tiles conforming to jis-z2801 and astm g-21 [for corridor on g.f and f.f, area of corridor on g.f. =961.0 sq mt+area on first floor =1874 sq mt, total 2835.00 sqm t] 129 providing and fixing false ceiling withwith 15 mm thick tegular/butt edged without perforation plain/designer light weight calciumsilicate anti-microbial bio-safe coated false ceiling tiles conforming to jis-z2801 and astm g-21 [for other area on g.f and f.f 7500-2835=4665 , qty considered 30% of 4665 sq mt ] 130 reinstallation of existing false ceiling tiles[qty considered 70% of 4665 sq mt ] 131 supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000v with annealed copper conductor having glass mica fire barrier tape covered by extruded layer of cross linkable ethylene propylene rubber (epr) insulation lszh inner bedding, steel wire armouring & lszh outer sheath 132 gst extra as applicable