tender for annual plan-tnly-project no:370/ward no:13/2025-2026/anappara health centre road side protection-700000-general civil work - side protection 2 3.5.2:excavation in soil with dozer with lead upto 100 mexcavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 3 od281353/2025-2026:dry rubble masonry with hard stone, excluding bond stone in foundation and superstructure including packing to compactness to lines and levels, cost and conveyance of all materials labour charges etc. complete as per approved drawing and relevant technical specifications 4 11.4.4:providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 iv. r.c.c grade m 20 5 11.8:supplying, fitting and placingtmt bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202 6 od281354/2025-2026:filling with contractor's own earth ( excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge 7 od281355/2025-2026:providing and laying reinforced cement concrete pipe np3 (450mm dia) as per design in single row providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granular material in single row including fixing collar with cement motar 1:2 but excluding excavation, protection works, back filling, concrete and masonry works in head walls and parapets clause 1106. 8 od296634/2025-2026:providing and fixing name board fixed over ms sheeting, 2 mm thick supported on gi pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 1701. 600 mm x 450 mm rectangular