tender for annual plan-kuzhimanna gp 2025-26,proj no:- 82/26 renovation works to kuzhiyamparambu kapoor andikkodu road -kuzhimanna gp-general civil work - road maintance 2 3.2:preparation of foundation for embankment
scarifying existing bituminous surface to a depth of 150 mm by mechanical means
scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4. 3 4.9:wet mix macadam
providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406.
by mechanical means with 1 km lead 4 od329193/2025-2026:surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. all kinds of soil 5 od148074/2025-2026:granular sub-base with well graded material (table 400.1)
(a) by mix in place method
construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401.
(i) for grading i material 6 5.1.1a:prime coat :- low porosity
providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical specification clause 502 7 5.2.3a:tack coat
providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503. 8 5.5.b.2a:modified penetration macadam 75 mm thick using bitumen s-65
construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kn static roller to achieve the desired degree of compaction as per technical specification clause 506.
(b) 75 mm thick :- (ii) bitumen (s-65) 9 5.5.a.1a:modified penetration macadam 50 mm thick using bitumen s-65
construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kn static roller to achieve the desired degree of compaction as per technical specification clause 506. 10 5.2.1a:tack coat
providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503. 11 od148286/2025-2026:mix seal surfacing - manual means - type a - bitumen s-65 using shredded plastic providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates coated with shredded plastic (3% by weight of bitumen) as per standard procedure using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509 by manual means:- type a (ii) bitumen (s-65) 12 od148448/2025-2026:providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, includingrubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.granite of any colour and shade area of slab upto 0.50 sqm lettering and fixing (name board).