tender for construction of processing shed 148.48 sq m. - excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for thefoundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means 3 excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means 4 providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 5 providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum rtype mixer with scada with natural sand) 6 providing and laying in situ cement concrete m20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. etc. complete, with fully automatic micro processor based plc with scada enabled concrete batch mix plant with natural sand 7 providing and casting in situ cement concrete m20of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabledconcrete batch mix plant (pan mixer).... with natural sand. 8 providing & casting in situ cement concrete m20of trap / granite /quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing etc. complete. (excluding reinforcement and structural steel). withfully automatic micro processor based plc with scada enabled concrete batch mix plant (pan mixer).... with natural sa 9 providing fly ash brick masonry with conventional / i.s. type fly ash bricks in c.m. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. 10 providing fly ash brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete 11 filling in plinth and floors with contractorsaterial/brought from outside and approved by engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete. spec. no. : bd.a. 11/page no. 294 12 providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paintand over it 2 coats of oil painting approved quality and shade etc. complete. 13 providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 b.w.g.) for roofing without wind tiles including fastening with galvanised iron screws & bolts, lead & bitumen washers as per drawing etc. complete.(weight of 5.5 kg/sq.m.).. 14 providing and fixing in position tmt fe500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. includingcutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) for tmt fe 415 steel bars ( if mild steel/hysd steel is to be used prior permission from s.e. should be taken ) 15 providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete. 16 providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep m.s. channel section of depth and thickness not less than 65 mm and 3.15 mmespectively with hold fast arrangements, m.s. bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of m.s. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of highgrade cast iron or mild steel and one coat of red lead primer etc. complete. (i.s. 62481979) (without mechanical gear) 17 providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete 18 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough toreceive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. 19 providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 20 providing and fixing 110 mm diameter pvc rain water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete. 21 shooting of still photograps outdoor and indoor of construction and other works of building , bridges, roads etc. in district and outside dist. at any distances ii) a set of same three copies of 4 x 6 size 22 add royalty as per government of maharashtra revenue and forest departments order for sand 23 add royalty as per government of maharashtra revenue and forest departments order forother material 24 electric work 25 supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. cb-lt/cu 26 making trench of suiable width and depth in hard murum /tar road for laying provided lt cable up to and including 36 sq. mm complete as per specification no. cw-exnctr 27 making trench of suiable width and depth in softmurumfor laying provided lt cable up to and including 36 sq. mm complete as per specification no. cw-exn - ctr 28 suplyinng erecting mains pvc unarmoured cable 1100 volt grade / isi mark 3 core / 2.5 sqmm standard / soild copper complete erected on wall with duly painted g.i. saddle @ 0.25 m c/c & rididly grouted in the wall with the help of plated screws. 29 suplyinng erectingwaether proof powder oated distribution board 4 way with 2 x 6 / 10 amps s.p.m.c.b. with industrial two pin plug socket 10a and 3 pin plug top 10 a with top cover necessary connection etc. complete with approved make. 30 providing point wiring for street light with pvc unarmoured cable 1100 volt grade isi mark 3 core 1.5 sqm standard / soild copper erected on wall with g.i. saddle duly painted @ 0.25 m c/c rigidly grouted in the wall with the help of plated screw including 4 x 4 m.s. box 2 way with epoxy painting & inside 10 amp nylon connector strip for street light connection and flexible cable of 2 mtrs. for street light connection etc. complete as directed by engineer in charg 31 supplying &erecting 10-12 w , 230 v integral type led lamp suitable for b-22 / e-27 base 32 supplying &erectingledstreet light fitting suitable for 20 to 25 w. with pf > 0.95 class ip - 65 and above housing of pressure die cast aluminium alloy and ;heat sink extruded aluminium complete as per specification no. fg-odf / fls 33 supplying &erectingstreet light wall bracket made from 40 mm dia b class g.i. pipe 1-2 m in total length complete as per specification no. fg-bkt / wb 34 supplying &erectingwith galavanised iron earth plate size 60x60x0.6 cm complete with all materials testing & recording the results as per specifications no. ea-ep 35 providing pipe type earthing with 40 mm dia g.i. pipe or 20 mm dia g.i. rod complete with all materials a per specification no ea-ep providing pipe type earting with 40 mm dia g.i. pipe or 20 mm dia g.i. rod complete with all materials as per specification ea-ep 36 supplying erecting & marking dpmcb 6a to 32a c-series ( for motor/power ) in provided distrubtion board as per specification no sw-swr/mcb 37 supplying erecting & making spmcb 6a to 32a b-series ( for lighting ) in provided distrubtion board as per specification no sw-swr/mcb 38 lab testing 39 sand- fineness modulus,silt and clay content 40 aggregate/crush material a) carrying out water absorption b)specific gravity c) impact valued) crushing value 41 cement- cement- standerd consistency,fineness, , setting time (initial and final), compressive strenght, soundness 42 concrete m10 grade- concrete cube compressive strength (set of 3 cubes) 43 concrete m20 grade- mix design m20 with all tests on besic materials 44 concrete m20 grade- concrete cube compressive strength (set of 3 cubes) 45 tmt steel bars- steel - tensile strength,yield stress, ultimate tensile stress,%elongation, weight per running meter,bend/rebendtest.(set of 3 bars) upto 16 mm (set of 3 bar) 46 murum plasticity index, fild density of copacted layer, proctor test 47 bricks: crushing value, absorption value, specific gravity 48 royalty 49 sand 50 other minerals 51 eshs 52 eshs plan