tender for annual plan-146/25-26 perumanna gp-bathroom for veterinary hospital-general civil work - toilet 2 od231482/2025-2026:demolishing laterite manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar modified 15.7.4 3 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 4 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) 5 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns 6 10.25.2:item shifted to sub head 14 as item 14.73item shifted to head 14 as item 14.74steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 7 od231443/2025-2026:multy purpose cement board 20mm thick:providing and fixing plain 20mm thick multy purpose cement board (high pressure steam cured)as per is:14862 with suitable screws for cement noard in flooring etc.,complete(frame work to be paid separately):20mm thick cement bonded wood particle board as per is:14276(modified odof 12.26.2) 8 12.26.2:providing and fixing plain multipurpose cement board(hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick cement bonded wood particle board as per is:14276 9 11.37:providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 10 8.31:providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in- charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 11 51.19.st1:supplying and installing ready made pvc septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (provision for cc/rcc/sand/06mm aggregate for the preparation of bed shall be paid separately)
1. below 15 flush capacity 12 50.17.1.3:supplying and fixing cp towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge. 13 50.17.1.4:supplying and fixing cp health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 14 50.18.7.4.2:providing and fixing pvc, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 32 mm dia 6 kgf/cm2 - internal work- exposed on wall 15 50.18.7.6.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 50 mm dia 6 kgf/cm2 - internal work- exposed on wall 16 50.18.9.9.2:providing and fixing pvc pipes includes joints of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. 110 mm dia 4 kg/cm2 17 50.6.1.4:solid block masonry using pre cast solid blocks (factory made) of size 30x20x20cm or nearest available size confirming to is 2185 part i of 1979 for foundation and plinth with thickness 20cm and above in: cm 1:6 ( 1 cement : 6 coarse sand ) etc complete 18 13.43.1:applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:water thinnable cement primer 19 13.60.1:wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:two or more coats on new work 20 od234580/2025-2026:rearranging the existng 60 mm thick factory made cement concrete interlocking paver already laid block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate of 6 mm size, all complete as per the direction of engineer-in-charge. 21 od234650/2025-2026:dismantling cement concrete interlocking paver manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. 22 od236833/2025-2026: providing and fixing wash basin with c.i brackets 15mm pvc pillar taps, 32mm cp brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : white vitreous china flat back wash basin size 550x400mm with single 15mm c.p brass pillar taps 23 17.2.1:providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:w.c. pan with isi marked white solid plastic seat and lid 24 21.1.1.2:providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is : 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminnium snap beading for glazing /paneling, c.p. brass/ stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge.(glazing, paneling and dash fasteners to be paid for separately):for fixed portionpowder coated aluminium (minimum thickness of powder coating 50 micron) 25 21.1.2.2:for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/ neoprene gasket required (fittings shall be paid for separately)powder coated aluminium (minimum thickness of powder coating 50 micron) 26 14.29:providing and fixing m.s. round or squre bars with m.s. flats at required spacing in wooden frames of windows and clerestory windows. 27 21.3.1:providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer - in -charge. ( cost of aluminium snap beading shall be paid in basic item):with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 28 13.62.1:painting with synthetic enamel paint of approved brand and manufacture of required colour to givean even shade:two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . 29 18.15.2:providing and fixing brass bib cock of approved quality :20 mm nominal bore 30 50.18.9.22.4:providing and fixing pvc moulded fittings/ accessories for rigid pvc pipes, including jointing with pvc solvent cement- 110 mm dia bend 31 50.18.9.22.6:providing and fixing pvc moulded fittings/accessories for rigid pvc pipes, including jointing with pvc solvent cement - 110x110x110 mm dia door tee 32 50.18.9.22.8:providing and fixing pvc moulded fittings /accessories for rigid pvc pipes, including jointing with pvc solvent cement -110 mm dia vent cowl 33 18.58.1.2:providing and fixing ptmt grating of approved quality and colour.circular type125 mm nominal dia with 25 mm waste hole 34 9.121:providing and fixing fiber glass reinforced plastic (frp) door frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. the laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides. m.s. stay shall be provided at the bottom to steady the frame. 35 9.122.1:providing and fixing to existing door frames.30 mm thick glas fibre reinforced plastic (frp) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick frp laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick frp laminate for panels conforming to is : 14856, including fixing to frames. 36 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 37 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 38 5.1.3:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 39 od239098/2025-2026:providing and fixing mirror of superior glass of approved quality of required shape and size of approved make and shade:rectangular shape 1500x450mm 40 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more