tender for construction work of martyr memorial in district sainik welfare and rehabilitation council (mainpuri) - excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.50 m & lead up to 300 m including filling watering ramming of excavated earth in to trenches. providing and laying cement concrete in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) and curing complete in missing portion, including cost of form work. in foundation and floors. class- 150 brick work in 16 cement and c.sand mortar in super structure including supply of all materials, labour and t & p etc. required for proper completion of work. reinforced cement concrete work in column, roofs having slope, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) column mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shaoe as necessary including bending for proper completion of the work and including supply of steel. its wastage bend, hooks and authorised overlapping shall be measured upto floor two level. 6 mm cement plaster of mix: 13.16.1 1:3 (1 cement: 3 fine sand) 20mm thick plaster 1:3 (cement:coarse sand) finished with a floating coat of neat cement on roof. providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture supply & fixing of angle iron frame with 35x35x3mm i/c fitting welding complete finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coat applied @ 1.67 itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. work (two or more coat applied @ 1.67 itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a, including jointing with seal ring conforming to is 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 12.41.2 110 mm diameter