tender for general repair and painting work at house no. 13a, mall avenue colony and house no. 1, lal bahadur shastri marg - dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.( for thickness of tiles 10 mm to 25 mm) dsr15.23.1 2 providing and fixing c.p.brass long body bib cock of approved quality conforming to is standerd and weighing not less 690 gms. 15 mm nominal bore ( 18.51.1) 3 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1) 4 providing and fixing c.p.brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a) 5 providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1 6 cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer- in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra a)will be paid on this account)(dsr14.75a) 7 providing and fixing isi markedflush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dar n0-9.21.1, 8 providing and fixingfly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1, 9 providing and fixing float glass panes 4.0 mm thick(weight not less than 10.00 kg/sqm), (dar-9.7.7.1) 10 providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. dar-9.83, 11 providing and fixing isi marked oxidised m.s tower bolt black finish (barreltype) with necessary screws etc complete copper oxidised as per ls 1378, 250x10 mm(dar -9.63.1) 12 providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (dar -9.74.1) 13 providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm (dar -9.74.2) 14 providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete. flexible pipe 32mm dia(17.28.2.1). 15 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (17.31). 16 providing and fixing 600x120x5 mm glass self with edge round off, supported on anodiesd aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.(17.33). 17 providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipes & fitting with one step cpvc solventcement and testing of joints complete as per direction of engineer -in-charge. internal work -exposed on wall (20 mm nominal dia pipe )18.7.2, 18 cleaning and desilting of gully trap chamber, including removal of rubbish mixedwithearthetc.anddisposalofsame,allasperthedirectionof engineer-in-charge.(dar14.76) 19 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.size 600x600(dsr 11.41.2 ) 20 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge (dsr 1.1.18) 21 removing white or colour wash by scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete.dsr-13.88, 22 providing and applying white cement based putty of average thickness 1 mm. of approved brand and manufacture. over the plastered wall surface to prepare the surface even and smooth complete. (dsr-13.80), 23 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work ( two or more coats applied @ 1.43 ltr/10sqm) over existing cement paint surface (apex ultima, weather coat all guard).13.112.1 24 wallpaintingwithacrylicemulsionpaint,havingvoc(volatileorganic compound)contentlessthan50grams/litre,ofapprovedbrandand manufacture,includingapplyingadditionalcoatswhereverrequired,to achieve even shade and colour.;-(two coats) dsr13.83.2 25 wallpaintingwithacrylicemulsionpaint,havingvoc(volatileorganic compound)contentlessthan50grams/litre,ofapprovedbrandand manufacture,includingapplyingadditionalcoatswhereverrequired,to achieve even shade and colour.;- (onecoats) dsr13.83.1 26 dismantling old plaster or skirtingracking out joint and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metars lead. dar no-15.56, 27 15 mm cement plaster on rough side of single or half brick wall of mix:. dar-13.5.1, 28 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work dsr13.99.1