tender for annual plan-amballoor gp 2025-26 general -maintenance works to various anganawadi centers in amballoor gp-general civil work - building manintenance(anganwadi no 77) 2 13.88:removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 3 13.98.1:wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:one or more coats on old work 4 13.99.1:painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :one or more coats on old work 5 13.106:painting (one or more coats) with black japan paint of approved brand and manufacture to give an even shade. 6 od285294/2025-2026:providing and fixing factory made pvc door including cost of all fittings, labour charges etc complete (approved data of ce lsgd vide circular dated 18.08.2016) od-11, dsr 2016 1.4902dtd 05.06.2017 7 10.25.2:item shifted to sub head 14 as item 14.73item shifted to head 14 as item 14.74steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 8 9.65.2:providing and fixing isi marked oxidised m.s. door latches conforming to is:5930 with screws etc. complete : (copper oxidized as per is : 1378).250x20x6 mm 9 15.40.1:dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead:thickness upto 40 mm 10 15.28.1:dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :g.s. sheet 11 10.16.1:steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes 12 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 13 od286121/2025-2026:providing and fixing aluminium profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.460 mm or nearest available thickness. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. od71/21-22 (approved data vide ce circular dated 18.08.2016) 14 od286122/2025-2026:providing and fixing 200 mm wide square upvc rain water gutter including all necessary fittings and making all necessary connnections complete as per the direction of engineer in charge at site 15 12.51.1:providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :ridges plain (500-600 mm) 16 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 17 od289772/2025-2026:providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6 mm metal. all complete as per the direction of engineer-in-charge 18 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) 19 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 20 50.6.1.5:solid block masonry using pre cast solid blocks ( factory made) of size 30x20x20cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level thickness 20cm and above in: cm 1:6 ( 1 cement : 6 coarse sand) etc complete 21 50.18.9.17.2:providing and fixing pvc pipes including fixing the pipe with clamps/clips at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 63 mm dia 4 kgf/cm2- external work - exposed on wall 22 50.18.9.20.1:providing and fixing pvc moulded fittings/ accessories for rigid pvc pipes, including jointing with pvc solvent cement - 63 mm dia elbow 23 50.18.9.20.2:providing and fixing pvc moulded fittings/ accessories for rigid pvc pipes, including jointing with pvc solvent cement -63 dia 45 degree elbow 24 50.18.9.20.3:providing and fixing pvc moulded fittings /accessories for rigid pvc pipes, including jointing with pvc solvent cement - 63 mm dia door elbow 25 50.18.9.20.4:providing and fixing pvc moulded fittings/ accessories for rigid pvc pipes, including jointing with pvc solvent cement - 63 mm dia bend 26 50.9.12.1:providing and fixing thomson multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site engineer-in-charge. 27 9.72.6:providing and fixing bright finished brass butt hinges with necessary screws etc. complete:75x40x2.5 mm (ordinary type) 28 9.81.2:providing and fixing bright finished brass handles with screws etc. complete:100 mm 29 9.90.1:providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.size 40 mm 30 od295062/2025-2026:man coolies engaging for repair to window/door shutter,repair to cutting,painting etc 31 13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) 32 anganwadi no 76 33 13.88:removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 34 13.98.1:wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:one or more coats on old work 35 13.99.1:painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :one or more coats on old work 36 13.106:painting (one or more coats) with black japan paint of approved brand and manufacture to give an even shade. 37 od290704/2025-2026:providing and fixing factory made pvc door including cost of all fittings, labour charges etc complete (approved data of ce lsgd vide circular dated 18.08.2016) od-11, dsr 2016 1.4902dtd 05.06.2017 38 od290709/2025-2026:providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6 mm metal. all complete as per the direction of engineer-in-charge 39 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) 40 50.9.12.1:providing and fixing thomson multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site engineer-in-charge. 41 9.72.6:providing and fixing bright finished brass butt hinges with necessary screws etc. complete:75x40x2.5 mm (ordinary type) 42 9.81.2:providing and fixing bright finished brass handles with screws etc. complete:100 mm 43 9.90.1:providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.size 40 mm 44 10.16.1:steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes 45 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 46 od293936/2025-2026:providing and fixing aluminium profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.460 mm or nearest available thickness. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. od71/21-22 (approved data vide ce circular dated 18.08.2016) 47 od293937/2025-2026:providing and fixing 200 mm wide square upvc rain water gutter including all necessary fittings and making all necessary connnections complete as per the direction of engineer in charge at site 48 10.25.2:item shifted to sub head 14 as item 14.73item shifted to head 14 as item 14.74steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 49 od294995/2025-2026:man coolies engaging for repair to window/door shutter,repair to cutting,painting etc 50 anganwadi no 66 51 50.9.6.1:providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. using anjili wood / jack wood 30 mm thick shutters 52 10.25.2:item shifted to sub head 14 as item 14.73item shifted to head 14 as item 14.74steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 53 15.40.1:dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead:thickness upto 40 mm 54 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 55 13.43.1:applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:water thinnable cement primer 56 13.106:painting (one or more coats) with black japan paint of approved brand and manufacture to give an even shade. 57 od304002/2025-2026:providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6 mm metal. all complete as per the direction of engineer-in-charge 58 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) 59 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 60 50.6.1.5:solid block masonry using pre cast solid blocks ( factory made) of size 30x20x20cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level thickness 20cm and above in: cm 1:6 ( 1 cement : 6 coarse sand) etc complete 61 50.18.9.6.2:providing and fixing pvc pipes includings jointing of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. 50 mm dia 6 kgf/cm2 62 10.16.1:steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes 63 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 64 od306484/2025-2026:providing and fixing aluminium profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.460 mm or nearest available thickness. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. od71/21-22 (approved data vide ce circular dated 18.08.2016)