annual plan-kannur block panchayath : project no : 76/2025-26-renovation of premetric hostel -general civil work -- 1 renovation works 2 od324140/2025-2026:taking out existing wooden doors/windows etc. and stacking within 50m as per the direction of the engineer-in-charge.(dar code 14.85 modified) 3 50.9.1.3:providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). using good quality vengai wood 4 50.9.6.3:providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. using vengai wood 30 mm thick shutters 5 9.48.1:providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 6 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 7 8.31:providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in- charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 8 od324142/2025-2026:providing and fixing alu zinc profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.40 mm (+0.05%), thickness . sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (dar code 12.50 modified) 9 13.67.1:varnishing with varnish of approved brand and manufacture :two or more coats of glue sizing with copal varnish over an under coat of flatting varnish 10 13.61.1:painting with synthetic enamel paint of approved brand and manufacture to give an even shade:two or more coats on new work 11 13.99.1:painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :one or more coats on old work 12 od324280/2025-2026:supplying and fitting name boards of size 75cmx45cm made with gi plain sheets 1.25mm thick(class iii) fitted with 35x35x4mm ms angle 2nos horizontally and 3nos vertically to make a frame for strengthening the gi sheet,fitted 2nos 32mm gi pipe vertically 90cm above from ground level and fixing in cement concrete 1:2:4,30cmx30cmx30cm including cost and conveyance of all materials,all labour charges,fabricating etc. complete. 13 od324279/2025-2026:printing new letters and figures of any shade; printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and technical specification clause 1701 details for 100 letters of 160 mm height, i.e., 1600 cm unit = per cm height per letter