Tender Result - Tender For Special Repair Of Bldg No P-110/01 To 8 Or Md Accn At Kse At Patiala Mil Stn; 1 Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. 2 M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 3 M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturers instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and directed.Note : WPC and chicken wire gauge will be measured and paid separately. 4 Supply only integral liquid water proofing compound complete all as specified and directed. 5 Supply only chicken wire mesh 22 gauge of size not less than 20X20mm complete all as specified and directed. 6 M&L for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 7 Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed. 8 M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. 9 Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 10 Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 11 S&F factory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 12 S&Ffactory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 13 M&L cementconcrete 1:3:6 type C-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed. 14 S&F in repair factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed 15 S&F in repair 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and complete all as specified and as directed by Enigneer-in-Charge 16 S&F Aluminium anodised tower bolt of 200mm extruded section and fixed all as specified and directed 17 S&F Aluminium alloy sliding door bolt with hasp,staple bolt type and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections300mm- 1 No per leaf complete all as specified and directed 18 S&F aluminium handles 150mm long fabricated type anodised complete all as specified and directed 19 S&F floor door stopper 150mm of aluminium alloy body and tounge ,anodised with hard drawn steel spring,fixed in floor all as specified and directed 20 S&Fin repair stainless steel (304) grade butt hinges 100mm complete all as specified and directed 21 S&Fin repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 22 Supplyand fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and directed. 23 S&FFactory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVCC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 Nos Stainless Steel butt hinges.complete all as specified and directed 24 S&F Factory made steel window box type using ERW hollow P section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete all as specified and as directed by Enigneer-in-Charge Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. 25 S&F Steelventilators, fixedtype, with glazing bars complete all as specified and as directed by Enigneer-in-Charge 26 M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane as complete al as specified and directed 27 S&F in reapir 3mm thick sheet glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane all as specified and directed 28 M&L for stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of apertutre 1.40mm fixedas complete al as specified and directed 29 S&F in repair for stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of apertutre 1.40mm fixedas complete al as specified and directed 30 M&L 3mm thickfigured glass pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane as in repair. 31 M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 32 S&F in repair stainlesssteel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. 33 M&L Preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified 34 M&L Preparation of New steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint overa coat of primer complete all as specified 35 M&L Black colour Granite 20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including 10 mm thick rendering in CM (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed 36 M&L for providing edge moulding to 18-20mm thick stoneof counters vanities etc incl machine polishing to edge to give high gloss finish complete all as specified and directed 37 M&L for Repair to RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out, Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.Make: Sikka/Dr fixit/Fosroc. 38 Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. specified product will also be applied on the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturers instructions complete all as specified and directed by Engr-in-Charge. Make: Sikka/Dr fixit/Fosroc. 39 Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturers specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereeverrequired and complete all as specified and directed by Engr-in-Charge.Make: Sikka/Dr fixit/Fosroc.Consumption: 0.5 kg/m2. complete all as per manufacturers instructions and all as specified.Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. 40 Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in15mm to 50mm mm thickness.Yield: approx. 0.84 ltr/kg.System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79.Consumption of 2.1 Kg/Sqm/mmMake: Sikka/Dr fixit/Fosroc.Note for BOQ Itemno. 37-40 : All safety equipments, Ropes, safety belts and ladders (Scaffolding) as reqd upto height of 15 Mtr is included in items.The contractor will take all precautions like insurance of workers etc.In case of any mishappening compensation will be paid by contractor. 41 M&L for Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcherwith cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. 42 Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent, having 100%elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturer specifications.Make: Sikka/Dr fixit/Fosroc. 43 Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises 44 Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 7-8mm thick and areaexceeding 0.11 sqm but not exceeding 0.18 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:6 over complete all as specified. 45 Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 450 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.Note : Dado should be flushed with the wall plastering. 46 Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 8-10mm thick and areaexceeding 0.18 sqm but not exceeding 0.38 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:6 overcomplete all as specified. 47 Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 8-10mm thick and areaexceeding 0.18 sqm but not exceeding 0.38 sqm, coloured as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 10mm thick Backing layer in CM 1:4 overcomplete all as specified. 48 M&L for Baroda Green marble, machine cut as in shelves/steps/landings/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screedof 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishingand including dismantling/demolition complete all as specified.Note : Single piece should be used in steps/cills/jambs/shelves. 49 S&F vitreous china premium/1st quality wall hung wash basin, white, flat back, min. size 550x440 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union andincl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturers instructions and taking down existing of any description/size all as specified. 50 S&F vitreous china premium/1st quality wash down water closet pan orrisa pan S/P trapcolouredincluding connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. ; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. 51 S&F vitreous china premium/1st quality wash down water closet pan (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified.Make : Cera (Conventional) or Hindware (Slick) equivalent from Parryware 52 S&F in repair flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. 53 S&F in repair CP Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified. 54 S&F 600x450 mm bevelled edge mirror of selected quality glass,mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers 55 S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf of 12 cm wide with chromium plated bracket guard and railing 60cm long complete in all respect all as specified. 56 S&F in repair sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steelD bracket fixed and railing complete all as specified and directed. 57 S&F in repair chromium plated overhead shower 125mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified. 58 S&F in repair Bib taps,CP,fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. 59 S&F in repair Pillar taps 15mm, cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered Hot or Coldwith long screwed shanks and fly-nutsscrewed for iron pipe and fixed complete all as specified and directed 60 S&Fin repair Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. 61 S&Fin repair Angular Stop Cock,CP,fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.M 62 S&F in repair stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm diaand including cantilever cast iron brackets, connecting union, etc, overall size 914mm x460mmX203mm with bowl size 405mmx 354mmx203mm and making good disturbed portion in CM 1:3 or PCC 1:2:4 type B-0 complete all as specified and directed. 63 S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified. 64 S&Fin repairPVC connections 15mm size with PTMT nuts of length 450mm complete all as directed and specified. 65 S&Fin repair cockroach trap gratings AISI-304 of size 100mm dia complete in all respect all as specified. 66 Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to store, 15mm bore complete all as directed and specified. 67 S&F in repair 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified. 68 Taking up or down existing steel tubing and connections, incl cleaning for refixing or removal to store 20mm bore complete all as directed and specified. 69 S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified. 70 Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified. 71 Dismentling ofof PVCwater srorage tank ofof 300 to 500 ltrs capacity as located on terrace of the building all as specified and directed. 72 S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover)whitecolour 500 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed. Make :Sintex/Diplast/Sheetal 73 S&Fin repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. 74 M&L Plain cement concrete 1:7:12 mix, type F-2 (using 40mm graded Brick aggregate) as in filling of sunken portionincl demolition of old cement concrete complete all as specified and directed. 75 M&L Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measered sepretly complete all as specified. 76 M&L for Applying three coats of brush bond acrylic based cementitious material of make Fosroc/sikka/Dr fixit as approved by GEfor sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified and as directed. 77 Providing 50 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed. 78 S&F PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction,including all fitting elbow, tees, sockets, bends etc. laidin walls & floors for connecting bottle traps & nahani trap complete all as specified and as directed. 79 M&L cast iron floor/nahani trap 100mm dia and 450 to 600mm longincluding jointing with solvent cement in repair complete all as specified and directed. 80 S&F Cast iron spun pipe,100mm bore, spun castin any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repaircomplete all as specified and directed. 81 S&F in repair 100 mm cast iron spun pipe and vent pipe in any length with or without ears laid in floorincl dismantling of old pipe and excavation of trenches,refilling and leveling of surface complete all as specified and directed. 82 S&F Cast iron bends duck foot or heelrest, radiusfor 100 mm bore pipe, as in repairs, complete all as specified and directed. 83 S&Fin repair cast iron 4 way junction for 100mm bore with access door as in repair complete all as specified. 84 M&Lfor cast iron cowls of 100 mm diacomplete all as specified and directed. 85 S&F in repair SGSW gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type P or S fixed in repair complete all as directed and specified. 86 Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified. 87 Demolition of mud phuska on roof any thickness all as directed. 88 Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified. 89 M&L PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed. 90 Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified. 91 Providing and laying3mm thick APP (Atactic Polyproplene Polymer) modifiedprefabricated five layer, weightnot less than 4.0 Kg/Sqm water proofingmembrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the samemembrane manufacturer ofdensity 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling alljoints etc after the surface complete as per standard practice as per manufacturers instructions.The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms(ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/.Softening point of membrane not less than 150 degreeC Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) Thelaying of membrane shall be gotdone through the authorised applicator of manufacturer of membrane only all as specified and directed.Make : Sika/STP/Fosroc 92 M&L PCC plain factory made tiles ISI marked cement concrete tiles of size 250x250x20-22mm thick machine pressed set joined and pointed in neat cement slury in floor and cut and polished with grey cement and no pigment over 15mm thick cement mortar (1:6) bedding and joints grouted flish in cement mortar (1:3) mixed with integral water proofing compound over roof surface complete all as specified and as directed 93 M&L Brick work with sub class B bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 incl demolition of old brickwork all as specified. 94 M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints and form work complete all as directed by Engr-in-Charge and complete as specified. 95 M&L PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed. 96 Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified. 97 S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. MAKE: Rajshri platicwood ltd/Century ply/Green ply 98 S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.MAKE: Rajshri platicwood ltd/Century ply/Green ply 99 S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed. MAKE: Rajshri platicwood ltd/Century ply/Green ply 100 S&FBall bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, Make KAFF/Hettich/Harrison 101 S&F tower bolts 200mm long of stainless steel 304 finished/of outer plate metalmatt finished complete fixed in position all as specified.Make : Harrison (Cat No 0812)or equivalent in KAFF/Hettich 102 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished200mm long matt finished complete fixed in position all as specified.Make : Harrison (Jasmine) or equivalent in KAFF/Hettich 103 S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified. 104 S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions all as specified.Make : Hettitchor equivalent in KAFF/Harrison 105 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished150mm long matt finished complete fixed in position all as specified.Make : Harrison (Jasmine) or equivalent in KAFF/Hettich 106 S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/ bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified. 107 S&F wardrobe tube/hanging rod for CB of size 20mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturers instructions all as specified. 108 S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified. 109 M&L for Steel rack for kitchen 750m x 600mm of weight not less than 5 Kg each fixed in repair complete all as specified and directed by Engr-in-Charge. 110 S&F 75 mm cast iron spun pipe in any length with or without ears laid in floorincl dismantling of old pipe and excavation of trenches,refilling and leveling of surface complete all as specified and directed. 111 S&F Cast iron bends duck foot or heelrest, radiusfor 75 mm bore pipe, as in repairs, complete all as specified and directed. 112 M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified and directed by Engr-in-Charge 113 Excavating in trenches, in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. 114 Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. 115 Removing excavated materialsto a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point in soils complete all as specified and as directed. 116 S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall complete all as specified and as directed. 117 M&L Cement concrete1:3:6, type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of 200mm bore pipes after they are laid and tested complete all as specified and as directed. 118 S&F 110mm PVC (SWR) Bends single socketed in any length with rubber joints, laid in trenches complete all as specified and as directed. 119 S&F CI P trap 600mm long and of 100mm dia complete all as specified and directed 120 M & L for mild steel framed work as in brackets etc for cooler stands,supportings frame workfor sun shadeetc framed steps/stairs etc complete using MS railing/angle iron Steel bars gusset plate etc complete all as specified & directed complete. 121 S&F reinforced precastconcrete as in manhole/drain covers of size exc 0.12sqm but n exc 1.00 sqm and thickness not less than 50mm and shapesquare/rectangular/circular fixed in position complete all as specified and directed. For measurement purpose it will be measured in cubic meter. 122 M & L Preparation of new plastered or unplastered surfaces of walls and ceiling etc.,andfor applying twocoat of distemper oil emulsion (OBD) over a coat of chalk whitingcomplete all as specified and as directed. 123 Applying 02 coats of exterior emulsion paint (light shade)by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer over one/two coat of putty including filling all voids and depressions with putty and making the surface smooth and even incl preparations of surfaces complete all as specified and directed. 124 Takingdown carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etcremoving materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of creditand making good the disturbed portion of all floor, ceiling etc all as specified and directed. 125 Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plateincluding 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directedby Engineer in-charge Note-I-(Switches and regulators shall be measured and paid for separately). Note-II- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-III- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -IV - cost of Eye/bottle thimblesused for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. Note:- V- Rate of cutting chasing included in the unit rate quoted for this item 126 M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plateincluding 1.5 sqmmPVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed.Note-I- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-II- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -III - cost of Eye/bottle thimblesused for connection for 2 way switch is deemed to be included in the unit rate quoted for this item. Note:-III- Rate of cutting chasing included in the unit rate quoted for this item 127 All as per Sl item No 125.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. 128 All as per Sl item No 125.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. 129 All as per item No.125.00 herein beforebut 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSHcopperearth wire for switch socket combination 3 pin 15 amps on independent board. 130 S&F Modularswitch1 way, 6 Amps, 1 module, 230 volts complete all as specified. 131 S&F Modularswitch2 way, 6 Amps, 1 module, 230 volts complete all as specified. 132 S&F Modularswitch1 way, 16 Amps, 1 module, 230 volts complete all as specified. 133 S&F Modularbell push switch1 way, 6 Amps, 1 module complete all as specified. 134 S&F Call bell ding dong AC 230 volt single pole complete all as specified. 135 S&F Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. 136 S&F Modularsocket 5 pin 6 &16 Amps, combination type2 module complete all as specified. 137 S&F Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. 138 S&F ceiling rose surface bakelite surface 65 x 50mm3 terminals all as specified & directed 139 Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge. 140 New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. 141 Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge. 142 M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge.Note 1:-2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit)Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc.10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring. 143 M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runsof 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Runof 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of(i) Rigid non-metallic PVC conduit of 25 mm dia withtees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc.10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring. 144 MCCB, 4 Pole, 63 A, 16 KA for fixing in DB including proper thimble connection, thermal and magnetic release protectioncomplete all as specified and directed by Engineer-in-charge. 145 Supply and fix epoxy power coated MCCBdistribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimblesused for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iii) connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size. 146 Supply and fix Sheet metal enclosure 8 ways double door for DBs when MCBs areto be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link allflush mounting type, drilling holes for incoming and out going cables with IP 43 protection complete all as specified & directed byEngr-in-charge. 147 Supply and fix MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs ofincluding proper thimble connections complete all as specified and directed by Engineer-in-Charge. 148 Supply and fix MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. 149 M & L forEarthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497. 150 Supply and fix Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in squareLED Batten 18/20W 6500Kof capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. 151 Supply and fix in replacement of elegatly designed sleek surface mounted pressure die-cast aluminiumLEDluminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existingcomplete all as specified & directed. 152 Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making Louver complete all as specified and directedby Engineer-in-Charge. 153 Taking down and refixing of ceiling fanafter necessary cleaning painting making serial No complete all as specified and directed by Enginner-in-charge. 154 Supply and fix Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making Louver complete all as specified and directedby Engineer-in-Charge. 155 Supply and fixingsingle pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge. 156 Supply and fix ElectricWater heater (Geyser) storage typeof capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum&high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and dirceted by Engineer-in-Charge 157 M&L PVC Meter Box of suitable size for single phase LT meter. door with 1 Nos of transparent glass of suitable for visibility of meter fixed on door with suitable arrangemnets. meter box shall be fixed in wall and necessary chiseling and make good of wall to be included in quoted cost.NOTE:-To fix the meter box required disconnecting and refixing of connections to be included in quoted rate. 158 Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm abovewith dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed. 159 Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete 1:2:4 TYPE B-0 all as specified and directed. 160 Supplying & laying factory made unreinforced Precast concrete cable coversclass LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables completeall as directed by Engr-in-Charge 161 Material and labour for replacement of GI tubing light grade 40 mm borefor passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. 162 S&F XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core supplied& laid in replacement complete all as specified& directedby Engineer-in-Charge.

8130913

Military Engineer Services

Tender For Special Repair Of Bldg No P-110/01 To 8 Or Md Accn At Kse At Patiala Mil Stn; 1 Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. 2 M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 3 M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturers instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and directed.Note : WPC and chicken wire gauge will be measured and paid separately. 4 Supply only integral liquid water proofing compound complete all as specified and directed. 5 Supply only chicken wire mesh 22 gauge of size not less than 20X20mm complete all as specified and directed. 6 M&L for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 7 Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed. 8 M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. 9 Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 10 Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 11 S&F factory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 12 S&Ffactory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 13 M&L cementconcrete 1:3:6 type C-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed. 14 S&F in repair factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed 15 S&F in repair 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and complete all as specified and as directed by Enigneer-in-Charge 16 S&F Aluminium anodised tower bolt of 200mm extruded section and fixed all as specified and directed 17 S&F Aluminium alloy sliding door bolt with hasp,staple bolt type and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections300mm- 1 No per leaf complete all as specified and directed 18 S&F aluminium handles 150mm long fabricated type anodised complete all as specified and directed 19 S&F floor door stopper 150mm of aluminium alloy body and tounge ,anodised with hard drawn steel spring,fixed in floor all as specified and directed 20 S&Fin repair stainless steel (304) grade butt hinges 100mm complete all as specified and directed 21 S&Fin repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 22 Supplyand fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and directed. 23 S&FFactory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVCC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 Nos Stainless Steel butt hinges.complete all as specified and directed 24 S&F Factory made steel window box type using ERW hollow P section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete all as specified and as directed by Enigneer-in-Charge Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. 25 S&F Steelventilators, fixedtype, with glazing bars complete all as specified and as directed by Enigneer-in-Charge 26 M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane as complete al as specified and directed 27 S&F in reapir 3mm thick sheet glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane all as specified and directed 28 M&L for stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of apertutre 1.40mm fixedas complete al as specified and directed 29 S&F in repair for stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of apertutre 1.40mm fixedas complete al as specified and directed 30 M&L 3mm thickfigured glass pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane as in repair. 31 M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 32 S&F in repair stainlesssteel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. 33 M&L Preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified 34 M&L Preparation of New steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint overa coat of primer complete all as specified 35 M&L Black colour Granite 20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including 10 mm thick rendering in CM (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed 36 M&L for providing edge moulding to 18-20mm thick stoneof counters vanities etc incl machine polishing to edge to give high gloss finish complete all as specified and directed 37 M&L for Repair to RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out, Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.Make: Sikka/Dr fixit/Fosroc. 38 Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. specified product will also be applied on the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturers instructions complete all as specified and directed by Engr-in-Charge. Make: Sikka/Dr fixit/Fosroc. 39 Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturers specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereeverrequired and complete all as specified and directed by Engr-in-Charge.Make: Sikka/Dr fixit/Fosroc.Consumption: 0.5 kg/m2. complete all as per manufacturers instructions and all as specified.Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. 40 Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in15mm to 50mm mm thickness.Yield: approx. 0.84 ltr/kg.System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79.Consumption of 2.1 Kg/Sqm/mmMake: Sikka/Dr fixit/Fosroc.Note for BOQ Itemno. 37-40 : All safety equipments, Ropes, safety belts and ladders (Scaffolding) as reqd upto height of 15 Mtr is included in items.The contractor will take all precautions like insurance of workers etc.In case of any mishappening compensation will be paid by contractor. 41 M&L for Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcherwith cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. 42 Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent, having 100%elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturer specifications.Make: Sikka/Dr fixit/Fosroc. 43 Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises 44 Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 7-8mm thick and areaexceeding 0.11 sqm but not exceeding 0.18 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:6 over complete all as specified. 45 Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 450 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.Note : Dado should be flushed with the wall plastering. 46 Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 8-10mm thick and areaexceeding 0.18 sqm but not exceeding 0.38 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:6 overcomplete all as specified. 47 Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 8-10mm thick and areaexceeding 0.18 sqm but not exceeding 0.38 sqm, coloured as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 10mm thick Backing layer in CM 1:4 overcomplete all as specified. 48 M&L for Baroda Green marble, machine cut as in shelves/steps/landings/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screedof 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishingand including dismantling/demolition complete all as specified.Note : Single piece should be used in steps/cills/jambs/shelves. 49 S&F vitreous china premium/1st quality wall hung wash basin, white, flat back, min. size 550x440 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union andincl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturers instructions and taking down existing of any description/size all as specified. 50 S&F vitreous china premium/1st quality wash down water closet pan orrisa pan S/P trapcolouredincluding connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. ; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. 51 S&F vitreous china premium/1st quality wash down water closet pan (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified.Make : Cera (Conventional) or Hindware (Slick) equivalent from Parryware 52 S&F in repair flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. 53 S&F in repair CP Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified. 54 S&F 600x450 mm bevelled edge mirror of selected quality glass,mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers 55 S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf of 12 cm wide with chromium plated bracket guard and railing 60cm long complete in all respect all as specified. 56 S&F in repair sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steelD bracket fixed and railing complete all as specified and directed. 57 S&F in repair chromium plated overhead shower 125mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified. 58 S&F in repair Bib taps,CP,fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. 59 S&F in repair Pillar taps 15mm, cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered Hot or Coldwith long screwed shanks and fly-nutsscrewed for iron pipe and fixed complete all as specified and directed 60 S&Fin repair Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. 61 S&Fin repair Angular Stop Cock,CP,fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.M 62 S&F in repair stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm diaand including cantilever cast iron brackets, connecting union, etc, overall size 914mm x460mmX203mm with bowl size 405mmx 354mmx203mm and making good disturbed portion in CM 1:3 or PCC 1:2:4 type B-0 complete all as specified and directed. 63 S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified. 64 S&Fin repairPVC connections 15mm size with PTMT nuts of length 450mm complete all as directed and specified. 65 S&Fin repair cockroach trap gratings AISI-304 of size 100mm dia complete in all respect all as specified. 66 Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to store, 15mm bore complete all as directed and specified. 67 S&F in repair 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified. 68 Taking up or down existing steel tubing and connections, incl cleaning for refixing or removal to store 20mm bore complete all as directed and specified. 69 S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified. 70 Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified. 71 Dismentling ofof PVCwater srorage tank ofof 300 to 500 ltrs capacity as located on terrace of the building all as specified and directed. 72 S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover)whitecolour 500 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed. Make :Sintex/Diplast/Sheetal 73 S&Fin repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. 74 M&L Plain cement concrete 1:7:12 mix, type F-2 (using 40mm graded Brick aggregate) as in filling of sunken portionincl demolition of old cement concrete complete all as specified and directed. 75 M&L Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measered sepretly complete all as specified. 76 M&L for Applying three coats of brush bond acrylic based cementitious material of make Fosroc/sikka/Dr fixit as approved by GEfor sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified and as directed. 77 Providing 50 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed. 78 S&F PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction,including all fitting elbow, tees, sockets, bends etc. laidin walls & floors for connecting bottle traps & nahani trap complete all as specified and as directed. 79 M&L cast iron floor/nahani trap 100mm dia and 450 to 600mm longincluding jointing with solvent cement in repair complete all as specified and directed. 80 S&F Cast iron spun pipe,100mm bore, spun castin any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repaircomplete all as specified and directed. 81 S&F in repair 100 mm cast iron spun pipe and vent pipe in any length with or without ears laid in floorincl dismantling of old pipe and excavation of trenches,refilling and leveling of surface complete all as specified and directed. 82 S&F Cast iron bends duck foot or heelrest, radiusfor 100 mm bore pipe, as in repairs, complete all as specified and directed. 83 S&Fin repair cast iron 4 way junction for 100mm bore with access door as in repair complete all as specified. 84 M&Lfor cast iron cowls of 100 mm diacomplete all as specified and directed. 85 S&F in repair SGSW gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type P or S fixed in repair complete all as directed and specified. 86 Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified. 87 Demolition of mud phuska on roof any thickness all as directed. 88 Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified. 89 M&L PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed. 90 Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified. 91 Providing and laying3mm thick APP (Atactic Polyproplene Polymer) modifiedprefabricated five layer, weightnot less than 4.0 Kg/Sqm water proofingmembrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the samemembrane manufacturer ofdensity 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling alljoints etc after the surface complete as per standard practice as per manufacturers instructions.The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms(ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/.Softening point of membrane not less than 150 degreeC Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) Thelaying of membrane shall be gotdone through the authorised applicator of manufacturer of membrane only all as specified and directed.Make : Sika/STP/Fosroc 92 M&L PCC plain factory made tiles ISI marked cement concrete tiles of size 250x250x20-22mm thick machine pressed set joined and pointed in neat cement slury in floor and cut and polished with grey cement and no pigment over 15mm thick cement mortar (1:6) bedding and joints grouted flish in cement mortar (1:3) mixed with integral water proofing compound over roof surface complete all as specified and as directed 93 M&L Brick work with sub class B bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 incl demolition of old brickwork all as specified. 94 M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints and form work complete all as directed by Engr-in-Charge and complete as specified. 95 M&L PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed. 96 Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified. 97 S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. MAKE: Rajshri platicwood ltd/Century ply/Green ply 98 S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.MAKE: Rajshri platicwood ltd/Century ply/Green ply 99 S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed. MAKE: Rajshri platicwood ltd/Century ply/Green ply 100 S&FBall bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, Make KAFF/Hettich/Harrison 101 S&F tower bolts 200mm long of stainless steel 304 finished/of outer plate metalmatt finished complete fixed in position all as specified.Make : Harrison (Cat No 0812)or equivalent in KAFF/Hettich 102 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished200mm long matt finished complete fixed in position all as specified.Make : Harrison (Jasmine) or equivalent in KAFF/Hettich 103 S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified. 104 S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions all as specified.Make : Hettitchor equivalent in KAFF/Harrison 105 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished150mm long matt finished complete fixed in position all as specified.Make : Harrison (Jasmine) or equivalent in KAFF/Hettich 106 S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/ bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified. 107 S&F wardrobe tube/hanging rod for CB of size 20mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturers instructions all as specified. 108 S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified. 109 M&L for Steel rack for kitchen 750m x 600mm of weight not less than 5 Kg each fixed in repair complete all as specified and directed by Engr-in-Charge. 110 S&F 75 mm cast iron spun pipe in any length with or without ears laid in floorincl dismantling of old pipe and excavation of trenches,refilling and leveling of surface complete all as specified and directed. 111 S&F Cast iron bends duck foot or heelrest, radiusfor 75 mm bore pipe, as in repairs, complete all as specified and directed. 112 M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified and directed by Engr-in-Charge 113 Excavating in trenches, in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. 114 Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. 115 Removing excavated materialsto a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point in soils complete all as specified and as directed. 116 S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall complete all as specified and as directed. 117 M&L Cement concrete1:3:6, type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of 200mm bore pipes after they are laid and tested complete all as specified and as directed. 118 S&F 110mm PVC (SWR) Bends single socketed in any length with rubber joints, laid in trenches complete all as specified and as directed. 119 S&F CI P trap 600mm long and of 100mm dia complete all as specified and directed 120 M & L for mild steel framed work as in brackets etc for cooler stands,supportings frame workfor sun shadeetc framed steps/stairs etc complete using MS railing/angle iron Steel bars gusset plate etc complete all as specified & directed complete. 121 S&F reinforced precastconcrete as in manhole/drain covers of size exc 0.12sqm but n exc 1.00 sqm and thickness not less than 50mm and shapesquare/rectangular/circular fixed in position complete all as specified and directed. For measurement purpose it will be measured in cubic meter. 122 M & L Preparation of new plastered or unplastered surfaces of walls and ceiling etc.,andfor applying twocoat of distemper oil emulsion (OBD) over a coat of chalk whitingcomplete all as specified and as directed. 123 Applying 02 coats of exterior emulsion paint (light shade)by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer over one/two coat of putty including filling all voids and depressions with putty and making the surface smooth and even incl preparations of surfaces complete all as specified and directed. 124 Takingdown carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etcremoving materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of creditand making good the disturbed portion of all floor, ceiling etc all as specified and directed. 125 Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plateincluding 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directedby Engineer in-charge Note-I-(Switches and regulators shall be measured and paid for separately). Note-II- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-III- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -IV - cost of Eye/bottle thimblesused for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. Note:- V- Rate of cutting chasing included in the unit rate quoted for this item 126 M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plateincluding 1.5 sqmmPVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed.Note-I- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-II- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -III - cost of Eye/bottle thimblesused for connection for 2 way switch is deemed to be included in the unit rate quoted for this item. Note:-III- Rate of cutting chasing included in the unit rate quoted for this item 127 All as per Sl item No 125.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. 128 All as per Sl item No 125.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. 129 All as per item No.125.00 herein beforebut 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSHcopperearth wire for switch socket combination 3 pin 15 amps on independent board. 130 S&F Modularswitch1 way, 6 Amps, 1 module, 230 volts complete all as specified. 131 S&F Modularswitch2 way, 6 Amps, 1 module, 230 volts complete all as specified. 132 S&F Modularswitch1 way, 16 Amps, 1 module, 230 volts complete all as specified. 133 S&F Modularbell push switch1 way, 6 Amps, 1 module complete all as specified. 134 S&F Call bell ding dong AC 230 volt single pole complete all as specified. 135 S&F Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. 136 S&F Modularsocket 5 pin 6 &16 Amps, combination type2 module complete all as specified. 137 S&F Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. 138 S&F ceiling rose surface bakelite surface 65 x 50mm3 terminals all as specified & directed 139 Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge. 140 New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. 141 Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge. 142 M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge.Note 1:-2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit)Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc.10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring. 143 M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runsof 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Runof 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of(i) Rigid non-metallic PVC conduit of 25 mm dia withtees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc.10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring. 144 MCCB, 4 Pole, 63 A, 16 KA for fixing in DB including proper thimble connection, thermal and magnetic release protectioncomplete all as specified and directed by Engineer-in-charge. 145 Supply and fix epoxy power coated MCCBdistribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimblesused for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iii) connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size. 146 Supply and fix Sheet metal enclosure 8 ways double door for DBs when MCBs areto be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link allflush mounting type, drilling holes for incoming and out going cables with IP 43 protection complete all as specified & directed byEngr-in-charge. 147 Supply and fix MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs ofincluding proper thimble connections complete all as specified and directed by Engineer-in-Charge. 148 Supply and fix MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. 149 M & L forEarthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497. 150 Supply and fix Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in squareLED Batten 18/20W 6500Kof capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. 151 Supply and fix in replacement of elegatly designed sleek surface mounted pressure die-cast aluminiumLEDluminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existingcomplete all as specified & directed. 152 Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making Louver complete all as specified and directedby Engineer-in-Charge. 153 Taking down and refixing of ceiling fanafter necessary cleaning painting making serial No complete all as specified and directed by Enginner-in-charge. 154 Supply and fix Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making Louver complete all as specified and directedby Engineer-in-Charge. 155 Supply and fixingsingle pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge. 156 Supply and fix ElectricWater heater (Geyser) storage typeof capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum&high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and dirceted by Engineer-in-Charge 157 M&L PVC Meter Box of suitable size for single phase LT meter. door with 1 Nos of transparent glass of suitable for visibility of meter fixed on door with suitable arrangemnets. meter box shall be fixed in wall and necessary chiseling and make good of wall to be included in quoted cost.NOTE:-To fix the meter box required disconnecting and refixing of connections to be included in quoted rate. 158 Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm abovewith dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed. 159 Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete 1:2:4 TYPE B-0 all as specified and directed. 160 Supplying & laying factory made unreinforced Precast concrete cable coversclass LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables completeall as directed by Engr-in-Charge 161 Material and labour for replacement of GI tubing light grade 40 mm borefor passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. 162 S&F XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core supplied& laid in replacement complete all as specified& directedby Engineer-in-Charge.

patiala

Punjab

Refer document

16-09-2025