proposed construction of kurtrimtalao at sr no 19, temghar, at w.no.13.bncmc-2 excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 3.00 m.) by manual means (sr.no.720/21.01) 3 providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with crushed sand/grit, ramming, watering etc. complete. (sr.no.754/21.40) 4 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) (sr.no.827/24.01) 5 providing and laying in situ /ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) (sr.no.836/25.11) 6 providing and laying cast in situ/ready mix cement concrete in m15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (wooden centering will not be allowed.),with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade)(sr.no.830/24.08) 7 providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(sr.no.871/26.33) 8 filling in plinth and floors with contractors material/brought from outside and approved by engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (sr.no.751/21.37) 9 providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. (sr.no.1082/34.14) 10 removing the excavated stuff including all loading unloading & transpotaton upto a distance of 5km etc complet (sr.no.559/5km) 11 providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete. note: foritem one number 15 to 18 prior approval of superintending engineer will be necessary 12 providing and fixing heavy duty inter locking concrete coloured paving blocks of 60 mm thickness of having a strength of 300 kilogram/sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete (sr.no.1038/33.51) 13 providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to i.s.15622/2006 (group d ii-a) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 14 providingandfixingmildsteelgrillworkforwindows,ventilatorsetc.20kilogram/onesquaremetreasperdrawingincludingfixtures,necessaryweldingandpaintingwithone coats of anticorrosive paint and two coats of oil painting complete. 15 providing and fixing m.s.grill door 24kilogram/onesquaremetre ofvarioussizeasperdetaileddrawingswithouthotdipcoating,ironfixturesandfasteningsand3coatsofoil painting etc 16 providingandapplyingtwocoatsoflead/zincbaseoilpaint/bituminouspaintofapprovedcolourandshadetonewwoodworkandfiberboardsincludingpreparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete. 17 add 5% corporation charges 18 gst 18%