annual plan-tholur gp 98/2025-26-rennovation of krishi bhavan ward - 7-general civil work - maintenance 2 21.5:providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to is : 733 in frames of false ceiling including aluminium angle cleats with necessary c.p brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to g.i level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the engineer-in-charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). 3 50.12.4.1:providing and fixing false ceiling with 7.5 mm thick pvc plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) 4 od70496/2025-2026:providing and fixing false ceiling with 7.5 mm thick pvc plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) 5 od56212/2025-2026:specification code: 14.54.1 painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade: one or more coats on old work 6 13.112.1:finishing walls with premium acrylic smooth exterior paint with silicone additives of required shadeold work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface 7 10.16.1:steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes 8 od67468/2025-2026:providing and fixing upvc rainwater gutters 150*100 mm approved make including cost of necessary fittings labour for fixing , scaffolding charge etc .complete 9 od67469/2025-2026:providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. 10 50.18.9.18.2:providing and fixing pvc pipes including fixing the pipe with clamps/clips at 1.00 m spacing. this included jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 75 mm dia 4 kfg/cm2 - external work - exposed on wall