road marking and other miscellaneous signage work with thermoplastic paint on kauwa baraon dhadhuwaghat road - cautionary, mandatory and informatory sign as per irc:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminum setting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (as per irc:67-2012 clause 14.60) 2 transverse bar (repeated bars) for speed calming (thermo plastic paint). providing and applying hot applied thermo plastic compound 2.5 mm thick including reflector sing glass beads @ 250 gm /sqm area. thickness of 5 mm is excusive of surface applied glass beads as per irc 35. the finish surface to be leveled uniform and free streaks and holes. composition of thermo plastic material shall be as per table 800-3 of clause 803 of morth including cost of all material labour t&p etc required for proper completion of work as directed by e/i. yellow colored set of 6 lines bar marking 15 mm thick 300mm wide at spacing of 600mm quantity for 1 set of bar marking 3 providing and applying hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. thickness of 2.5 mm is excusive of surface applied glass beads as per irc-35-2015. the finish surface to be leveled uniform and free form streaks and holes. composition of thermo plastic material shall be as per table 800-9 of clause 803 of morth confirming to grade-i as per is:164 and thermoplastic materials tested in accordence with astm d36/bs-3262-(part-i) including cost of all material labour t&p etc required for proper completion of work as directed by e/i.