tender for boundary wall construction work in the college of shraddha kanya inter college patha, khadini, block bamor jhansi - supply and fixing of sign board including painting and lettering as directed by engineer-in-charge. 2 clearing jungle including up rooting of trunk vegetation grass bush wood trees and sapling of girth upto 30cm. measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50m. outside the periphery of area cleared as per si.no. 2.31 3 boring holes of 200 mm dia piles of single under reamed of 500 mm f bulb and 3.50 m deep. 4 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) as si no-5.1.2 5 earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by engineer-in-charge. 6 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per si no. 4.1.8 7 brick work with common burnt clay (non modular) bricks of class -150in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand) 8 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete in thermo-mechanically treated bars of mild steel and medium tensile steel bars 10 brick work with common burnt clay bricks of m-150 class in super structure above plinth level upto floor v level in all shapes and sizes cement mortar 1:6 (1 cement: 6 coarse sand) 11 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) as per is 13.4.2 12 providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per sl no. -13.80 13 finishing walls with water proofing cement paint of required shade : 13.44.1 new work (two or more coats applied @ 3.84 kg/10 sqm)