tender for various civil maintenance works in residences no. 01-02b to 98b located at mla niwas-2 (purana) - fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide apperture with matching wood beading. dsr no-9.7.8. 2 providing and fixing isi marked is:1341 m.s. pressed butt hinges bright finished with necessary screws etc. complete 125x65x2.12 mm (dsr -9.55.1) 3 providing and fixing isi marked is:1341 m.s. pressed butt hinges bright finished with necessary screws etc. complete100x58x1.90 mm (dsr -9.55.2) 4 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete (copper oxidised as per is 1378). 300x16 mm (dsr -9.62.1) 5 providing and fixing isi marked oxidised m.ssliding doorbolts with nuts and screws etc complete. 250x16 mm (dsr -9.62.2) 6 providing and fixing isi marked oxidised m.s. tower bolt black finish, (barrel type) with necessary screws etc. complete (copper oxidised as per is 1378) 250x10 mm (dsr -9.63.1) 7 providing and fixing isi marked oxidised m.s tower bolt black finish (barreltype) with necessary screws etc complete(copper oxidised as per is 1378) 200x10 mm(dsr -9.63.2) 8 providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessaryscrews etc. complete (copper oxidised as per is 1378). 125 mm (dsr -9.66.1) 9 providing amd fixing chlorinated polyyinyl chloride (cpvc) pipes , having thermal stability for hot & cold water supply , including all cpvc plains & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing . this includes jointing of pipe and fitting with one step cpvc solventcement and testing of joints complete as per direction of engineer in charge . internal work -exposed on wall (20mm nominal outer dia pipe )dsr no .18.7.2 10 providing and fixing chlorinate polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings.this includes jointing of pipes & fittings with one step cpvc solvent cement trenching, refilling & testing ofjoints complete as per direction of engineer-in-charge.external work. 25mm nominal outer dia pipesdsr no- 18.7.3 11 providing and fixing brass bib cock of approved quality ( 15 mm nominal bore)18.15.1 12 providing and fixing brass stop cock brass stop cock of approved quality ( 15mm nominal bore) 18.16.1 13 providing and fixing ball valve(brass ) of approved quality , high or low pressure , with plastic floats complete:( 15 mm nominal bore)18.18.1 14 providing and fixing c.p.brass bib cock of approved quality conforming to is: 8931 15 mm nominal bore ( 18.49.1) 15 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standsrd and weighing not less than 810 gms , ( 15 mm nominal bore) 18.50.1 16 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 ( 15 mm nominal bore)18.53.1 17 providing and fixing isi marked flush door shutters conforming to is: 2202 (part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30mm thick including isi marked stainless steel butt hinges with necessary (dsr -9.21.2) 18 providing and fixing water closet squatting pan (indian type w.cpan) with 100 mm sand cast iron p or s trap. 10 liter low level white p.v.c flushing cistern. including flush pipe, with manually controlled device (handle lever) conformingto is : 7231, with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required. (17.1) white vitreous china orrisa patter w. c. pan of size 580x440 mm with integral type foot rest (17.1.1 ) 19 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistren with standsrd flush pipe and c.p. brass spreaders with brass unions and g.l. clamps complete. including painting of fittings and brackets. cutting and making good the walls and floors wherever required. (17.4) one urinal basin with 5 liter white p. v. c. automatic flushing cistern (17.4.1 ) 20 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass piller taps, 32 mm c.p. brass waste of standsrd pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.(17.7) white vitreous china wash basin size 630x450 mm with a pair of15 mm c p brass pillar tapes (17.7.1 ) 21 providing and fixing white vitreous china pedestal forwash basin completely recessed at all the back for the reception of pipes and fittings. (17.8) 22 providing and fixing 8 mm dia c.p./s.s. jet with flexible tube upto 1 meter long with s.s. trangular plate to eureopean typew.c. of quality and make as approved by engineer-in- charge.(17.16a). 23 providing and fixing pvc low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231with all fittings and fixtures complete.(17.18). 10liter capacity -white (17.18.1) 24 providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete. (17.28).semi rigid pipe 32mm dia (17.28.1.1) 25 providing and fixing glass panes with putty and glazing clips in steel doors, windows, celestory windows, all complete with. 4.0 mm thick glass panes. dsr no- 10.30.1 26 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (17.31). 27 providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. dsr no- 9.83 28 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. for thickness of tiles 10 mm to 25 mm. dsr no-15.23.1 29 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in all colours shades except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (dsr no- 11.38) 30 kota stone slab flooring over 20 mm (average) thick laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement : 4 coarse sand). 25 mm thick. dsr no-11.26.1 31 mirror polishig on marble work/granite work/stone work where ever required to give high gloss finish complete. dsr no- 8.6 32 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:4 (1 cement : 4 coarse sand) dsr no- 6.4.1. 33 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. d.s.r no-13.88 34 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (d.s.r no-15.56) 35 15 mm cement plaster on rough side of single or half brick wall ofmix: 1:4 ( 1 cement 4 coarse sand) (dsr no- 13.5.1) 36 providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(d.s.r no -13.80) 37 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre (d.s.rno -13.41.1) 38 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats). (d.s.r no-13.81.1) 39 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work. (d.s.r no-13.99.1)