tender for renewal of lalganj gaipura rampurghat road - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing,rolling with 3-wheeled steel/vibratory roller in stages to proper grade and camber applying and brooming requsite typeof screening /binding materials to fill-up the interstices of coarse aggregate watering andcompacting to the required density. 2 dense graded bituminous macadam providing and laying dense graded bituminous macadam with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects.(grade-ii) 3 providing and applying tack coat with medium setting bitumen emulsion using bitumen pressure dristributor @ 0.30 kg. per sqm. on the prepared bituminous surface as per mort&h clause 503 4 bituminous concreteproviding and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mort&h specifications clause 509 complete in all respects. 5 providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm and 5.6 mm aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less then 200 tonne per hour laying and rolling with a smooth wheeled roller finished to required level and grades 6 providing and laying premix seal coat with hmp of appropriate capacity not less than 200 tonnes/hours using crushed stone chipping 6.70 mm size and penetration bitumen of suitable grade .