tender for lrrp-2024-25 vaikom lac 3031-vadakara parakkal road velloor gp-general civil work - retarring 2 75.5.5.a.1pb:modified penetration macadam 50 mm thick using bitumen s-65 - packed bitumen ratesconstruction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kn static roller to achieve the desired degree of compaction as per technical specification clause 506. 3 75.5.5.b.2pb:modified penetration macadam 75 mm thick using bitumen s-65 - packed bitumen ratesconstruction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kn static roller to achieve the desired degree of compaction as per technical specification clause 506. 4 75.5.2.1pb:tack coat - with packed bitumen rates
providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503. 5 75.5.11.1.a.2pb:mix seal surfacing - manual means - type a - bitumen s-65 - packed bitumen ratesproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509by manual meanstype a(ii) bitumen (s-65) 6 od462341/2024-2025:surface dressingof road up to 150 mmdepthincluding all cost labour etc complete 7 75.8.1.1.a:providing plain cement concrete for wearing coat cc 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) nominal mix (1:2:4) 8 3.5.1:excavation in cutting in soil by manual means with lead upto 50 m
excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3 9 11.4.1.1:providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203
i. p.c.c grade m 10
(i) nominal mix 1:3:6 10 11.4.4:providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203
iv. r.c.c grade m 20 11 11.8:supplying, fitting and placingtmt bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202 12 od478794/2024-2025:providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per irc :67 made of type iv micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composite material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of ms angle 40x40x6 and supported on gi pipe pole 50mm nb-2 nos confirming to is 1239 firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete min size 40 cm x 40 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. (derived from mord spec 10.3.a.2)