tender for annual plan-rajakkad g p 219/2024-25:-melepurackal kanakakkunnu road maintenance-general civil work - road maintenance 2 8.3.2.a:earthwork in hill road
(ii) excavation in hilly areas in soil by mechanical means
a) excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per technical specification clause 1603.1 3 75.5.5.b.2pb:modified penetration macadam 75 mm thick using bitumen s-65 - packed bitumen rates
construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kn static roller to achieve the desired degree of compaction as per technical specification clause 506. 4 75.5.2.1pb:tack coat - with packed bitumen rates
providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503. 5 75.5.12.a.3.2pb:seal coat - manual means - type c - bitumen s-65 - packed bitumen rates
providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per technical specification clause 510
a. by manual means
case iii : type c
(ii) bitumen (s-65) 6 75.5.9.1.2pb:20mm thick open-graded premix carpet using bituminous (penetration grade/modified bitumen) binder - bitumen s-65 - packed bitumen rates
providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per technical specification clause 508.
case - i by manual means
(ii) bitumen (s-65) 7 75.8.1.1.a:providing plain cement concrete for wearing coat cc 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) nominal mix (1:2:4) 8 od457048/2024-2025:construction of subgrade and earthen shoulders
construction of subgrade and earthen shoulders with approved material obtained from road way cutting with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1.