tender road marking work using thermoplastic paint from rampur badgoun to alludeenpur chakwali mirjapur hote to saharanpur badgoun. - provinding and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, per thickness of 2.5 mm is exclusive applied glass beads as per irc 35 the finished surface to level , uniform and free from streak and holes (for repeated bar) complete in all respects but excluding gst. 2 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35-2015 .the finished surface to be level, uniform and free from streaks and holes. rates are inclusive of all taxes, royalty,etc. all t&p/machine material and labour required for proper complete in all respects but excluding gst. (ch-27 new item 7) 3 reflective raised pavement marker with shanks providing and fixing of raised pavement markers with twin shanks of adequate length anchored with epoxy / bitumen adhesive of approved make(cat eye) type x-astmd-4956-04 avery dennision/3m(usa make) having moulded body of polycarbonate, asa, hips or abs able to support a load of 13.635 m.t. tested in accordance with astmd 4280 type h and other requirement mentioned in mort&h circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. the length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, the area of each reflective surface shall not be less than 13 sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of category a of mort&h circular no. rw/nh 33023/10/97-do-iii dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to astmd 788 or equivalent. with 7 years warranty. rate shall be inclusive of all taxes, royalty,etc. etc. all t&p/ machine material and labour required for proper completion of work. 4 providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.with 7 years warranty.rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty etc. all t&p/machine material and labour required for proper completion of workexcluding gst. (90 cm high octagon)(as per sor. ch. 27 si. no. 6 g) 5 providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.with 7 years warranty.rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty etc. all t&p/machine material and labour required for proper completion of workexcluding gst. (60 cm circular)(as per sor. ch. 27 si. no. 6 (c) 6 providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.with 7 years warranty.rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty etc. all t&p/machine material and labour required for proper completion of workexcluding gst. (90 cm equilateral triangle) (as per sor. ch. 27 si. no. 6 (a) 7 retro-reflectorised traffic sign as per irc 67-2012providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-iv 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. the retro-reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per irc 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. 80 mm x 60 mm rectangular with diffinitation plate (20 cm x 50 cm)ch. 27 new item 06 d complete excluding gst. 8 supply, fixing and hoisting of 6.00-7.00 m. spancantilever structure in position with one vertical post of 6.00 m. clear height from the top of r.c.c. foundation made of 300 mm. dia pipe welded with 10 mm thick ms plate at bottom supported with 10 mm thick ms plate stiffners & two nos. 8 mm thick ms plates at top welded with structure of 40 mm nb (m) pipe comprising ofhorizontal, vertical & bracing pipe of 32 mm nb (m) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and r.c.c. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of e/i charge. with 7 years warranty. rates include design, fabrication, supply,transportation and erection of the signage structure inclusive ofalltaxes, royalty,etc. all t&p/machine material and labour required for proper completion of the work. note : the composite warranty jointlysigned by original manufacturer & authorized converter of at least 7years shall be furnished on non judicial stamp of required denomination for complete structure.ch. 27 new item. 08 9 retro reflective signboard made up of 2 mm thick alluminium sheet, face to be fully covered with 3m high intensity prismatic reflective sheeting series 3930,letters/ simbols shall be made of same retroreflective sheeting and computer cut as per colour required. boards are to be supplied alongwith back support frame of ms angle size 35x35x5 mm.and back side of alluminium sheet shall be painted with stove enamel paint. with 7 years warranty. rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty, vat etc. all t&p/machine material and labour required for proper completion of work. excluding gst.note : the composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. ch. 20 new item. 04 10 retro-reflectorised traffic sign as per irc 67-2012providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-iv 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. the retro-reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per irc 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender.j) 30 x 90 cm (left/right) object hazard. ch. 27 new item 06 j 11 providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.with 7 years warranty.rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty etc. all t&p/machine material and labour required for proper completion of workexcluding gst. i) 155 x 60 cm double chevron (as per sor. ch. 27 si. no. 6 (a)