tender for providing and fixing open gym equipments at rtc bhondsi under zone iv mcg-- 1 seated chest press: providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. 2 pull chair:- providing, and fixing of pull pair of size 2500 x 800 x 2000 mm make of green gym or equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc .primer paint to be applied at all welding points prior to finishing. pedals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be` made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly. bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by officer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gulldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix theequipment on to it and cover nuts and bolts with the baseplate cover, all complete as per directions of engineer in charge. 3 horse rider station:- providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of green gym or equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using alczo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. padals shall be made up nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly. bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by engineer-in-charge.equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment,colour on metal, seat and base cover plate and fixing of equipment etc. 4 double cross walker/ cross trainer double:- providing, and fixing double cross walker of size 1600 x 600 x 1600 mm make of green gym or equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the g.i pipes are 40 mm dia and 2.5 mm thick all g.i pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of g.i pipes are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly. bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company like skf to be approved by officer -in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of g.i pipe to be coloured by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength n425 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.` the rates are inclusive of all taxes like gst, transportation, installation in cc with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect. 5 leg press: providing designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5mm thick. all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micror thick 6 twister:- providing, and fixing twister of size 1700 x 1300 x 1300 mm make of green gym or equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly. bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by officer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of officer -in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of. equipment etc.`` `