tender for box culvert, access road and protective work in place of damaged culvert in km 09 of itgaon bamrauli road - construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 carted 1.0 km 2 brick soling with straight over burnt brick laid flat and dry and edging on both side including preparation of subgrade to prescribed camber and including supply of brick filling joints with local earth over the entire surface and including labour & t& p etc four proper completion of work 3 supply and laying 1000 mm dia r.c.c. hume pipe np-3 class for water divert 4 earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. 5 sand filling in foundation trenches as per drawing & technical specification 6 plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. 7 plain/reinforced cement concrete in open foundation complete as per drawing and technical specifications. clause 15.11- 1500,1700 & 2100 rcc m-25 8 plain/reinforced cement concrete for wall & slab etc. complete as per drawing and technical specifications.. clause 15.12- 1500,1700 & 2100 rcc m-25 9 supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications. clause 15.1- 1600 10 back filling behind abutment, wing wall and return wall complete as per drawing and technical specificationclause 15.23-710.1.4.of irc:78 & 2200 11 providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. 12 providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and technical specification. 13 dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the engineer-in-charge within a distance of 60 m.si no 694 14 construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 15 providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 16 providing, laying and spreading of graded stone aggregate (wmm) after mixing withwater at omc in mechanical mix plant carriage of mixed material by tipper to site , layingwith 1%opccement and 3.5% emulsionin uniform single layeron sub base/subgrade andcompacting with the road roller to achieve the desire density. for stabilised layer. 17 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 18 providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects 19 providing and laying filter material underneath pitching in slopes complete as per drawing and technical specification 20 providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications 21 brick masonry work in cement mortar 1:3 in foundation complete excluding pointing and plastering, as per drawing and technical specifications. 22 plastering with cement mortar (1:3 ) on brick work in sub-structure as per technical specifications