tender for work of reconstruction of bhikanpur kuri route from moradabad kanth road for agricultural marketing facilities in the sugar mill area for the financial year 2024-25. - 1 construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2 including all labour, material, labour cess, t&p etc complete but excluding gst. 2 providing, laying, spreading and compacting stone aggregates of specific sizes towater bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeld roller 80-100 kn in stages to proper grade and camber, applying and brooming stone screening / binding material to fill-up the interstics of coarse aggregate, watering and compacting to the required density.grading 3 as per technical specification clause 405.including all labour, material, labour cess, t&p etc complete but excluding gst. 3 providing, laying, spreading and compacting of graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% opc cement and 3.50% emulsion in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.including all labour, material, labour cess, t&p etc complete but excluding gst. 4 providing and applying tack coat with bitumen vg-10 using bitumen distributor at the rate of 0.25 kg per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per technical specification clause 503. including cost of bitumen, material, labour, labour cess, royalty, t&p etc and all other taxes but excluding gst. 5 providing, laying and rolling of open-graded premix carpet (hmp) of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using vg-10 grade bitumenbitumen to required line, grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by type b seal coat as per technical specification clause 508. including cost of bitumen, material, labour, labour cess, royalty, t&p etc and all other taxes but excluding gst. 6 providing and laying seal coat by mechanical means (hmp) with vg-10 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type b as per technical specification clause 510 including cost of bitumen, all material, labour, labour cess, royalty, t&p etc complete and all other taxes but excluding gst.