tender for various civil maintenance works in house no. 99b to 158b located at mla niwas-2 (new). - treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement morter 1:2 (1 cemnt;2 coarse sand) to match the existing floor: with chlorpyriphos/lindance e.c. 20% with 1% concentration. d.a.r no-2.35.3.1 2 providing and fixing isi marked flush door shutters conforming to is: 2202 (part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30mm thick including isi marked stainless steel butt hinges with necessary (dsr -9.21.2) 3 providing amd fixing chlorinated polyyinyl chloride (cpvc) pipes , having thermal stability for hot & cold water supply , including all cpvc plains & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing . this includes jointing of pipe and fitting with one step cpvc solventcement and testing of joints complete as per direction of engineer in charge . internal work -exposed on wall (20mm nominal outer dia pipe )dsr no .18.7.2 4 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 ( 15 mm nominal bore)18.53.1 5 providing and fixing water closet squatting pan (indian type w.cpan) with 100 mm sand cast iron p or s trap. 10 liter low level white p.v.c flushing cistern. including flush pipe, with manually controlled device (handle lever) conformingto is : 7231, with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required. (17.1) white vitreous china orrisa patter w. c. pan of size 580x440 mm with integral type foot rest (17.1.1 ) 6 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistren with standsrd flush pipe and c.p. brass spreaders with brass unions and g.l. clamps complete. including painting of fittings and brackets. cutting and making good the walls and floors wherever required. (17.4) one urinal basin with 5 liter white p. v. c. automatic flushing cistern (17.4.1 ) 7 providing and fixing 8 mm dia c.p./s.s. jet with flexible tube upto 1 meter long with s.s. trangular plate to eureopean typew.c. of quality and make as approved by engineer-in- charge.(17.16a). 8 providing and fixing pvc low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231with all fittings and fixtures complete.(17.18). 10liter capacity -white (17.18.1) 9 providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white. d.s.r no- 17.19.1 10 providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete. (17.28).semi rigid pipe 32mm dia (17.28.1.1) 11 providing and fixing solid plastic seat with lid for pedestal type w.c. pan complete : white solid plastic seat with lid. d.s.r no- 17.20.1 12 providing and fixing glass panes with putty and glazing clips in steel doors, windows, celestory windows, all complete with. 4.0 mm thick glass panes. dsr no- 10.30.1 13 providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. dsr no- 9.83 14 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in all colours shades except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (dsr no- 11.38) 15 providing and fixing 1st quality ceramic, glazed wall tiles conforming to is 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete. dsr no-8.31 16 taking out existing cc interlocking paver blocks from footpath/central verge, including removal of rubbish etc, disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviable material within 50 meter lead as per direction of engineer-in-charge. (dar 16.83) 17 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.all work up to plinth level, 1:6:12 (1 cement 6 coarse sand (zone-iii) 12 graded brick aggregate 40 mm nominal size).pwd (sch) 273. 18 laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete as per the direction of engineer-in-charge (old cc paver blocks shall be supplied by the department free of cost). dsr no-16.84 19 providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machne cut for kitchen platforms, vanity counters.window sills facias and simular locations of required size, approved shade coulur and texture laid over : 20 mm thick base cement mortar 1:4 ( 1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy louch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. area of slab over 0.50 sqm (dsr no- 8.2.2.2) 20 providing cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. ( dar no- 11.3.1) 21 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in :cement mortar 1:4 (1 cement : 4 coarse sand) dsr no- 6.4.1 22 providing and laying vitrifed tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is : 15622 of approved brand & manufacturer, in all colours and shade in skirting riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to is 15477 in average 6 mm thickness including grouting of joints (payment for grouting of jointsto be made separately). dar no-11.47.2 23 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. d.s.r no-13.88 24 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (d.s.r no-15.56) 25 15 mm cement plaster on rough side of single or half brick wall ofmix: 1:4 ( 1 cement 4 coarse sand) (dsr no- 13.5.1) 26 providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(d.s.r no -13.80) 27 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre (d.s.rno -13.41.1) 28 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats). (d.s.r no-13.81.1) 29 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work. (d.s.r no-13.99.1)