tender for misc repair to md accn buildings at air force station highground under age (i) highground chandigarh- 1 dismantling brick tiles or concrete tilessingle layer on roof and removalcomplete all as specified and as directed. 2 material and labour for cutting chases, pinning in, makinggood to facings where required in brick wall and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and directed. 3 demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) and removal to a distance exceeding 100 metre, complete all as specified and directed. 4 material and labour forplain cement concrete 1:2:4 type b1 using 20mm graded crushed stone aggregateas in roof padding and maintaining required slopeincl mixing water proofing compound (dr. fixit) as per manufacturers instruction (water proofing liquid shall be paid seperately) complete all as specified and as directed. 5 taking down existing mud plaster/ tarfelt including roof treatment , bedding on brick or stone surface, roof parapet wall etc including racking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed. 6 material and labour for providing roof treatment as under complete all as specified and directed. : -(a)applying bitumenous primer @ 0.30 litre per sqm over cleaned and dry roof surface including parapet.(b)material and labour for applying a coat of blown bitumen 85/25 grade @ 1.20 kg per sqm over priming coat of roof.(c) material and labour for providing and laying 3mm thick app modified polyester reinforced water proofing membrane with minimum weight of 3.60 kg/sqm , as specified.the app membrane shall be laid using torch-on application with minimum 10 cm side overlap and 15 cm end overlap.the app memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant.the rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. 7 material and labour,cleaning the new or old pastered or concrete surfaces and water proofing treatment on vertical surfaces of roof consisting as under including taking down old membrane (as in vertical surfaces) complete all as specified and directed:- (a) applying evenly a coat of bituminous primer conforming to is-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces(b) a layer of minimum 3mm thick app polymeric membrane of weight not less than3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.(c) finally finished with a coat of bitumastic aluminium paint over the membrane. 8 material and labour, 40mm thick brick tiles laid on and including 15mm thick cement screed bed in cm (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all specified and directed. 9 all as per serial item no 8 here-in-before (but except brick tiles),complete all as specified and directed.note :(i) old serviceable tiles as obtained from serial item no 70 here-in-before shall be reused.(ii) the cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer. 10 material & labour plain cement concrete (1:2:4) type b-1, using 20 mm graded mechanically crushed stone aggregates as in,roof kerb ,padding to roof to maintain the required slope mixed with acrylic base water proofing compound @ 1% by weight of cement including all necessary form work, complete all as specified and directed. 11 supply only water proofing compound isi marked complete all as specified. make: pidiproof wl (dr fixit) or equivalent isi marked make as approved by age(i) complete all as specified and directed. 12 supply and fix in repair rotational moulded pvc, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), isi marked, hoisted and fixed in position, with & including all fittings such as gi tank nipple etc. but excluding ball valve ,complete all as specified and directed. 13 supply and fix in repair rotational moulded pvc, double layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), isi marked, hoisted and fixed in position, with & including all fittings such as gi tank nipple etc. but excluding ball valve ,complete all as specified and directed. 14 supply and fix in repair ball valve, high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball, isi marked (minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore, complete all as specified and directed. 15 supply and fix in repair 20mm gun metal,globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. 16 supply and fix in repair15 mm stop /angle valve cast copper ally chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed. 17 supply and fix in repair health faucet (abs body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and abs wall hook complete all as specified and directed. 18 supply and fix in repair sheet glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm width wide chromium plated bracket, guard and railing 60 cm long complete all as specified and directed. 19 supply & fix in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed. 20 supply and fix in repair plastic water closet seat with flat bottom and cover and mild steel chromium plated hinges device complete all as specified and directed. 21 supply and fix in repair brass cp basin mixer long body swan neck hot & cold water screwed down high presssure 15 mm bore complete all as specified and directed. 22 supply and fix in repairs 75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type b-1 (1:2:4)complete all as specified and directed. 23 supply and fix in repairspvc tank lid 450mm dia made of powder coated 1.25 mm thick mild steel sheet with 8 mm diabolt and nuts flat iron strips to be provided to keep the the tank lid tight as a protection as per samplewith age (i) suitable for 500/1000 litre capacity complete all as specified and directed. 24 taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including removal from site, complete all as specified and directed. 25 taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including removal from site, complete all as specified and directed. 26 supply and fix 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed.note : cutting chases as required shall be measured and paid seperately. 27 supply and fix steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. 28 re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed. 29 re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed. 30 supply & fix in repairs 15mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. 31 supply & fix in repair 110 mm bore pvc (swr) pipes with, single socketed in any length with rubber ring joints fixed to walland making good the mouth of rain water pipe complete all as specified and directed. 32 supply & fix in repair 110 mm bore pvc (swr) bends any radius, fixed with solvent cement in any position as per site requirement complete all as specified and directed. 33 supply & fix in repairs 100mm bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. 34 dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing removing survicabletiles to store and rubbish off the primises complete all as specified and directed. 35 material & labour for cement concrete tiles with grey cement and pigment 25cm x 25 cm x 22mm thick, machine pressedset and jointedand pointed in neat cement slurry in floors over and including 15 mm screed bed in cm 1:4 complete all as specified and directed. 36 supply & fix in repair pvc syphon with washer set suitable for 10 litre capacitypvc flushing cistern to make cistern functional complete all as specified and directed. 37 demolition of cement concrete unreinforcedof any description and in any position not otherwise specifically provided for as in padding/ ist floorcomplete all as specified and as directed 38 material and labour for 25 mm thick, pcc (1:2:4), type b-0 (12.5mm graded crushed stone aggregate) as in flooring finished even & rough to receive the bedding mortar, complete all as specified and directed. 39 material and labour fornon skid ceramic coloured tiles, 7 to 8 mm thick, joint free (square/ rectangular) area of each tile exceeding 0.11 sq.m but not exceeding 0.18sq.m, laid in floors with neat cement slurry @ 3.00 kg/square metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. 40 material and labour forglazed ceramic (digital glossy finish) coloured tiles 350x450x8 mm thick, joint freeon vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 10mm thick cement mortar as in backing coat of tile in cement mortar 1:4, complete all as specified and directed. 41 material and labour forvitrified ceramic coloured tiles(light shade), 10 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 sq.m,laid in floors with neat cement slurry @ 3.00 kg/square metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. 42 material and labour for vitrified ceramic coloured tiles, 10 mm thick (square/ rectangular) area of each tilenot exceeding 0.36 sq.m, as in skirting, set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. 43 demolition stone slabs and tiles of any description or thickness in floors/ dado, aprons etc., laid bedded and pointed in any mortar, complete all as specified and directed. 44 material and labour for granite (of any type ) 20 mm thick, work (table rubbed and polished) fine grained z black/red incooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in cm 1:4, complete all as specified and directed. 45 material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingover and including 20 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles complete all specified and directed. 46 material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingin riser of steps, skirting, dado and pillar laid over cement screed and jointed withover and including 10 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles complete all specified and directed. 47 demolition of brick masonry in any position built in any cement mortar, complete all as specified and directed. 48 material and labour for brick work with sub class ‘b’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), using old size bricks, complete all as specified and directed. 49 material and labour for brick work with sub class ‘b’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4), using old size bricks, in half brick wall complete all as specified and directed. 50 taking down cement plaster including racking out joints hacking for key scrubbing down with water all as specified and directed. 51 material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified and directed. note: the rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 12.00 mtr height building. 52 material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and directed. note: the rate quoted by contractor is deemed to be included necessary scaffolding and form work complete all as specified and directed. 53 material and labour for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such aschajjas, balcony,mumty and staircase flight ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed.note: the rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 12.00 mtr height building. 54 material and labour for 10 mmthick rendering in cement 1:4 on fair faces of concrete surface over 10 mm thick dubbing in cm 1:4 on wall/ concrete surfaces (sides and top of chajjas, and similar items)finished surface even and smooth w/o using extra cement with and incl taking down broken surfaces of concrete and applyingtwo coats of existing finishes and shades complete all as specified and directed. 55 demolition of re-inforced cement concrete (re-inforcement to be cut to facilitate demolition) as in chajjas fins/ facia, parapets etc complete all as specified and directed. 56 material and labour preparation of new plastered surfaces and apply two coat of oil bound distmperover 1mm thick wall care putty over a coat of primer to smoothening the surface by using sand paper, complete all as specified and directed. 57 material and labour for preparation of newly plastered or un plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and directed. 58 material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. 59 material and labour for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces comlete all as specified and directed. 60 material and labour for complete removal of existing treatment from internal surfaces on walls by wire brushes and applying 1mm thick cement wall care putty to obtain smooth regular/even finish surfaces by using sand paper and applying two coats of oil bond distemper, complete all as specified and directed. 61 material and labour for complete removal of existing treatment from internal surfaces on ceilingby wire brushes and applying 1mm thick cement wall care putty to obtain smooth regular/even finish surfaces by using sand paper and applying two coats of oil bond distemper, complete all as specified and directed. 62 supply & fix in repairs vitreouschina wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including connected to drains outlet, complete all as specified and directed. 63 material and labour for prepartation of newwooden surfaces over 10 cm width or girth not otherwise described and applying two coats ofcoat of synthetic enamel paintover a coat of pink primer complete all as specified and directed. 64 material and labour for prepartation of new painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying two coats ofsynthetic enamel paint over a coat of red oxide complete all as specified and directed. 65 supply & fix in repairs vitreous china squating pan, orissapattern, size 580x440mm white, with integral foot rests, including 100mm cast iron p or s trap andcast iron sanitary connection socket to fit wc outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed. 66 supply and fix in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new bracketscomplete all as specified and directed. 67 supply and fix in repairs pvc valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet,ball valve, float and handle including brackets, low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any and fixing complete all as specified and directed. 68 supply and fix in repair brass chromium plated shower rose 125mm size, with arm swivel joints, including fixing to steel pipe or union complete all as specified and directed. 69 supply and fix in repairs towel rail 600 mm long, 20 mm dia, ‘d’ type, brass chromium plated, fixed to walls with screws and plastic cleats, complete all as specified and directed. 70 taking down chowkhats or framewith shutters without taking of shutter from the frame of any description exceeding 1.50 sq. m but not exceeding 4.00 sq. m each, and making good the disturbed portion in cm1:4 & finished with similar specification as exists, complete all as specified and directed. 71 taking down chowkhats or framewith shutters without taking of shutter from the frame of any description not exceeding 1.50 sq. m each, and making good the disturbed portion in cm1:4 & finished with similar specification as exists, complete all as specified and directed. 72 supply and fix pressed steel frames of size 125 x 60 mm for door with one or more rebates including necessary fixing lugs, hinges, lock, strick plae, etc complete as specified and directed.note : the size/ dimensions and type of frames shall be as shown in is and thickness of ms sheet 1.25mm thick, complete as specified. 73 supply and fix pressed steel frames of size 105 x 60 mm for door with one or more rebates including necessary fixing lugs, hinges, lock, strick plae, etc complete as specified and directed.note : the size/ dimensions and type of frames shall be as shown in is and thickness of ms sheet 1.25mm thick, complete as specified. 74 supply & fix 2nd class hard wood, plain solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 75 supply and fix factory made single extruded wpc (wood polymer composite) solid door/ window/ s & f ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with ms hold fast/lugs/ss dash fasteners of required dia and length complete all as specified and directed. (m.s. hold fast/ lugs or ss dash fasteners shall be paid for separately). 76 supply and fix 40mm thick flush shutter solid core construction with block board core and plywood face panel commercial type on both sides complete all as specified and directed. 77 supply and fix 35m thick glazed and skeleton shutters, of 2nd class hardwood, open rebaed and prepared to receive glass, gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size fo members of shutter a sspecified in ssr part i, section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed. 78 supply and fixing second class hard wood 35 mm thick plain framed, panelled shutter (two panesl) with lock rail and panel of 9 mm b.w.p. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per is : 1003 (part i), kiln seasoned and chemically pressure treated, complete all as specified and directed. 79 supply and fixing factory made single extruded wpc (wood polymer composite) solid plainflushdoor shutter of size 30mm thick comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisturproof and fire retardant. wpc to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, complete all as specified and directed. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 80 material and labour factory made solid pvc moulded door shutter, 28 to 30mm thick (stiles), with 2 panel design with 2mm thick moulded pvc sheet on the front face & 2mm plain colour pvc sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. 81 taking down shutters of any description not exceeding 1.0 sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed. 82 taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed. 83 supply and fixing flush shutters 25 mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, both faces covered with decorative face veneer, duly provided with 6mm thick teakwood lipping on edges, fitted to chowkats, complete all as specified & directed. 84 supply and fixing continuous (piano) hinges mild steel, bright finish or electrogalvanised flap size 30 mm, complete all as specified and directed. 85 supply and fixing 100 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed. 86 supply and fixing 100 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed. 87 supply and fixing framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.gde-e-165, complete all as specified and directed. 88 supply and fixing hasp & staple, safety type, aluminium anodised, 100 mm size, fixed with screws,complete all as specified and directed. 89 supply & fix factorymadeboxtypesteelwindow with pintlehinges&1nos150mmmildsteeltower boltstoeachshutter,steelhandleandwith glazing bars,dovetailed or welded and with one shopcoatofzincchromateprimercompleteall asspecifiedandshownondrawingno ceaf/std-185-2012 sheets 1/2 & 2/2. 90 supply & fix factorymadeboxtypesteelwindow with pintlehinges&2nos150mmmildsteeltower boltstoeachshutter,steelhandleandwithout glazingbars,includingflatiron12x3mmfor securingwiremesh,dovetailedorweldedand withoneshopcoatofzinc chromateprimer complete all as specified and shown on drawing no ceaf/std-185-2012 sheets 1/2 & 2/2. 91 material and labour for precastcement concrete type b-0 1:2:4 mix ( 12.5 mm graded aggregate) in door and window frames any size or double rebated including arrangement complete all as specified and directed. 92 supply and fixng in repairs looking mirror 600 mm x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood with decorative type wooden frame and fixed to wooden plugs with steel screws, complete all as specified and directed. 93 suppl and fix in repair ms chromium plated curtain rod 25 mm diawith and incl ms chromium plated decorative round funnals on either end which provides a visually balanced appearance incl ms chromium plated brackets fixed to wall with 30mm wooden steel screws and pvc rawal plug anchors complete all as specified and directed. 94 supply and fixing door seal 50 mm wide, made with aluminium black plate and nylon brush fixed with screws, complete all as specified and directed. 95 supply and fixing 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed. 96 supply and fixing 150 mm long extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed. 97 supply and fixing 140 mm door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring fixed in door, complete all as specified and directed. 98 supply and fixing aluminium alloy, anodised, sliding door bolts 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed. 99 supply & fix 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. 100 supply & fix in repair 200mm mild steel helical spring pattern including roller and roller plate complete all as specified and directed. 101 supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frame with stainless steel wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. 102 supply and fix 3 mm thickness sheet glass ordinaryquality and glazing with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and directed 103 supply and fix 3 mm thickness sheet glass pin head type and glazing with with oil putty/beads in square n.exc 0.50 sqm in each pane complete all as specified and directed 104 hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. 105 hacking out old broken glass ( any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pin / clips andproviding new ones complete all as specified and directed. 106 demolition of cement concrete in groundfloors & pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. 107 material and labour for 40 mm thick, pcc 1:2:4, type b-1 using 20 mm graded stone aggregates finished even and smooth using extra cement complete all as specified and directed. 108 material and labour for 75mm thick plain cement concrete (1:3:6), type c-2, using 40 mm graded stone aggregate as in plinth protection, finished the surface even and fair, complete all as specified. 109 supply and fixing in repairs stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size915mmx460mm with bowl size410mmx330mmx160mm, with and including pvc waste pipe and cp waste coupling 32 mm, complete all as specified directed. 110 supply and fixing bib tap long body with flange, cast copper alloy, fancy type, chromium plated,screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit,complete all as specified and directed. make:- cat no 8608 of prayag or equivalent in ess ess, marc,hindware. 111 supply and fixing pillar tap long neck, cast copper alloy, chromium plated, fancy type, with capstan head,screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia and fixed towhb and connections to iron pipe, as in repairs, complete all as specified and directed. 112 supply and fixing flexible waste pipe suitable for whb/sink/urinal, fixed as in repairs, complete all as specified and directed. 113 dismantling of 75/100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches and removal from site to store for reuse or credit, complete all as specified and directed. 114 supply and fixing 100 mm borecast iron soil, waste and vent pipes in any length with or without ears, fixed with cement joints, laid in trenches or in floors complete all as specified and directed. 115 supply and fixing 75 mm borecast iron soil, waste and vent pipes in any length with or without ears, fixed with cement joints, laid in trenches or in floors complete all as specified and directed. 116 supply and fixing 100 mm borecast iron soil, waste and vent pipes in any length with or without ears, fixed with cement joints, fixed to wall, complete all as specified and directed. 117 supply and fixing 75 mm borecast iron soil, waste and vent pipes in any length with or without ears, fixed with cement joints, fixed to wall, complete all as specified and directed. 118 supply and fixing in repairs cast ironbends 100mm bore,diminishing piece or tapers, isi marked, fixed to pipes, with oval access doors, complete all as specified and directed. 119 supply and fixing in repairs cast iron100 mm bore bend with ducks foot or heal rest, complete all as specified and directed. 120 supply and fixing in repairs cast iron75 mm bore bend with ducks foot or heal rest, complete all as specified and directed. 121 supply and fixing in repairsstack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays for 100 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed. 122 supply and fixing in repairsstack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays for 75 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed. 123 material and labour for cutting chases for concealed water tubingand making good, cutting not exceeding 10 cm girth, complete all as specified and directed. 124 supply and fixing in repairs15 mm borebrass cp wall mixer with l bend,for mixing hot & cold water, screwed down for iron pipeand fixed,complete all as specified and directed. 125 supply and fixing in repair kitchen plate rack made of stainless steel 1 mm thick withplug washers, over all size 75 cm x 75 cm, including fixing to wallwith all assessories complete all as specified and directed. 126 supply and fixing stop valve, cast copper alloy, fancy type, long shank and cup (concealed), chromium plated,screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit,complete all as specified and directed. 127 supply and fixing in repairpvc cabinet mirror of size 400 mm x 400 mm fixed to wall with rawal plugs and screws, complete all as specified and directed. 128 supply and fixing in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, wast pipe, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each washers, including cantilever cast iron brackets, connecting union etc, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. 129 supply and fixing in repair cast iron cowl 75 mm bore, complete all as specified and directed. 130 supply and fixing in repairs pvc connection 15 mm size of length 600 mm with ptmt nuts, complete all as specified and directed. 131 water proofing treatment to sunken portion of wcs, bathroom etc. by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating of make as approved in technical instruction 5/ 2003:-(a) 15 mm thick plaster (1:4) in cement sand mortar with integral water proofing compound 2 % by weight of cement on floor and wall,finishing the surfaces even and smooth without using extra cement. the surface shall then be cured and allowed to dry.(note: supply only water proofing compound shall be measured and paid separately).(b) first layer of slurry of cement @ 0.488 kg/sq.m mixed with acrylic based polymer modified cementitious composite compound @ 0.253 kg/sq.m.this layer will be allowed to air cure for 4 hrs.(c) second layer of slurry of cement @ 0.242 kg/sq.m mixed with acrylic based polymer modified cementitious composite compound @ 0.126 kg/sq.m.this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. 132 supply and fix in repair 19 mm thick prelaminatedparticle board, interior grade , prelaminated one sidewith decorative choice and other side balancing white lamination fixed with screws with timber frame work complete all as specified and directed. 133 note: the total amount shall subject to adjustment of credit of rs 60060.00 for old materials as per schedule of credit