renewal work with general repairs on srinagar bhandra road to sijwaha road - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. (a) by manual means 2 providing and applying tack coat with bitumen vg-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503. 3 20mm thick open-graded premix carpet using bituminous (penetration grade/modified bitumen) providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per technical specification clause 508.case - i by manual means(i)bitumen (s-90) 4 seal coatproviding and laying seal coat by manual means with vg-10 grade bitument sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c as per technical specification clause 510 5 renewing parties 3 metes wide (1.50 m. both side) including dressing surface, filling upto 8 cm. depth & making namunas at ever 15.00 m. apart on either side slopes of 1:2 etc. trenches for taking earth to be so dug that they form a continuous side drain at road boundary. 6 providing and fixing of typical informatory sign board as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. all m.s. will be stove enameled on both sides.lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 7 maintenance of bituminous surface road and gravel of wbm road including filling pot hols and patch repair etc. restroration of rain cuts and dressing of side slop / berms making up of berms / shoulders maintenance of drain, maintenance of culvert, maintenance of guard rails and parapet, maintenance of road sign, speed breakers standing tree at adjacent of road wherever required maintenance of 200m stone (hectometre) and kilometer stones, cutting of branches of trees, shrub and trimming of glass and weeds etc while washing of parapet including cd work, paiting of guard stones, refixing of displaced gaurd stone (as per performance index annexure-1) mentioned in go no-17/2024/ sa-113/23-1-2024-23-1099/113 /2023 dated 16-01-2024 & e-in-c letter no-3689/c-oprmc / mul-2023-24 dated 17-02-2024 subjected to approval from govt. maintenance of1st year after completion of work @ 0% of total cost of pc work 8 maintenance cost for 2nd year @ 1.50% cost of pc work 9 maintenance cost for 3rd year @ 3.00% cost of pc work 10 maintenance cost for 4th year @ 4.50% cost of pc work 11 maintenance cost for 5th year @ 6.00% cost of pc work